|
| LinkBack | Thread Tools | Display Modes |
02-14-2008, 04:44 PM | #1 |
Rock Crawler Join Date: Jul 2007 Location: Portland,OR
Posts: 888
| Droop w/ bent links..thoughts?
I have bent links on the rear and I like it> has anyon put bent links on the front of a drooper with good results? It seem like it would get hung up on the chassis side of the front links. Although it would... I think... offer greater breakover potential. Anyone done this who's got any feedback??? Thanks all! I tried droop bent links on search but it didn't really yield much. Thanks again!! |
Sponsored Links | |
02-15-2008, 08:00 AM | #2 |
Newbie Join Date: Jan 2008 Location: portland
Posts: 6
|
when i first found out about the bent links and the droop setup (about the same time) i went out and bought them both, thinking more clearance with low C.O.G. i put it all together, and it would sidehill like no other, because of the low C.O.G. the only problem is that with the stock chassis, its too low to the ground, i would get caught up on almost every rock out there. so now i just use the bent links, until i get the x-trail chassis.
|
Thread Tools | |
Display Modes | |
| |