RCCrawler Forums

fidencio74 · 03-01-2008, 05:58 PM

I put this AX10 together last week, I bought the Jeep Body and tried to sell it but I decided to keep it after seen another projects. Let me know aht do you guys think. I haven't install the electronics because I haven't decide between Mamba Max and Novak Crawler.

Hitec 985 Coreless
Hitec 645 DIG
Mamba Max ESC (Soon)
Integy V10 55 Turn(Soon)
4 Link Set up front and rear
Axial Aluminum Shocks w/ Internal springs
Bent links
Axial Battery Plate
R2 Tranny with dig

Larson627 · 03-01-2008, 07:50 PM

You look a little young to be building crawlers! just kidding of course, looks good, Might look a little cleaner with a few less stickers, but thats just my opinion. I like the 4 link set up your running!

LIKES2CRAWL · 03-01-2008, 10:00 PM

Get the Mamba Maxx and kill 2 birds with one stone. It will do brushed and brushless and so many diffrent adjustments can be made.

fidencio74 · 03-01-2008, 10:04 PM

I think that you can run both with the Novak also.

fidencio74 · 03-16-2008, 10:01 AM

I finally pu the kit together and here is hte set up, I'm just waiting for the 4mm bullte conectora and the CC BEC to arrive, My local hobby shop didn't have any. I'll try the set up next weekend we got 3 really good spots arround the corner where I live.

CC MAMBA MAX, Integy V10 55 turn motor brusshed, Hitec 985 ultra torque coreless, Airtronicas M3 radio system, TCS 8 pack battery sadle pack, 4 Link set up, Lower bent links, 2.5mm screws for the bedlocks, aluminum body shocks, hpi yellow front spring shocks, Losi Claws.

03-01-2008, 05:58 PM	#1
fidencio74 Rock Stacker Join Date: Jan 2008 Location: Escondido Posts: 73	AX10 Rubicon I put this AX10 together last week, I bought the Jeep Body and tried to sell it but I decided to keep it after seen another projects. Let me know aht do you guys think. I haven't install the electronics because I haven't decide between Mamba Max and Novak Crawler. Hitec 985 Coreless Hitec 645 DIG Mamba Max ESC (Soon) Integy V10 55 Turn(Soon) 4 Link Set up front and rear Axial Aluminum Shocks w/ Internal springs Bent links Axial Battery Plate R2 Tranny with dig Last edited by fidencio74; 03-03-2008 at 09:06 PM.

03-01-2008, 07:50 PM	#2
Larson627 Pebble Pounder Join Date: Dec 2006 Location: Hinsdale Posts: 181	You look a little young to be building crawlers! just kidding of course, looks good, Might look a little cleaner with a few less stickers, but thats just my opinion. I like the 4 link set up your running!

03-01-2008, 10:00 PM	#3
LIKES2CRAWL I wanna be Dave Join Date: Jun 2005 Location: KENNEWICK, WA Posts: 2,513	Get the Mamba Maxx and kill 2 birds with one stone. It will do brushed and brushless and so many diffrent adjustments can be made.

03-01-2008, 10:04 PM	#4
fidencio74 Rock Stacker Join Date: Jan 2008 Location: Escondido Posts: 73	I think that you can run both with the Novak also.

03-16-2008, 10:01 AM	#5
fidencio74 Rock Stacker Join Date: Jan 2008 Location: Escondido Posts: 73	I finally pu the kit together and here is hte set up, I'm just waiting for the 4mm bullte conectora and the CC BEC to arrive, My local hobby shop didn't have any. I'll try the set up next weekend we got 3 really good spots arround the corner where I live. CC MAMBA MAX, Integy V10 55 turn motor brusshed, Hitec 985 ultra torque coreless, Airtronicas M3 radio system, TCS 8 pack battery sadle pack, 4 Link set up, Lower bent links, 2.5mm screws for the bedlocks, aluminum body shocks, hpi yellow front spring shocks, Losi Claws.

Sponsored Links

RCCrawler Forums

Thread: AX10 Rubicon