Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Axial AX-10 Scorpion
Loading

Notices

Thread: Hot Racing Lock Outs - Which Bearings?

Reply
 
LinkBack Thread Tools Display Modes
Old 05-22-2008, 12:16 PM   #1
I joined the Band!
 
Join Date: Mar 2008
Location: All over the place
Posts: 152
Default Hot Racing Lock Outs - Which Bearings?

I've just bought the HR rear axle lock out kit and i can't work out which bearings to put in. Do i just leave the one in the end of the axle, and put the smaller one from the hub in the alu lock out?

I assume the larger bearing in the hub is not needed.

Hope that makes sense.

I have searched and can't find the answer, so thanks for any help.

Neil
wknl is offline   Reply With Quote
Sponsored Links
Old 05-22-2008, 02:21 PM   #2
Rock Crawler
 
Join Date: Dec 2007
Location: GILBERT
Posts: 751
Default

you use one big one and one small one in the lockout take the one out of the axle tube. thats what i did
jamesdicken is offline   Reply With Quote
Old 05-22-2008, 03:52 PM   #3
I joined the Band!
 
Join Date: Mar 2008
Location: All over the place
Posts: 152
Default

The big one from the inside of the hub doesn't fit into the Hot Racing Lock out. I could only get 1 small one in there and i left the small one in the end of the plastic axle.

Hope that is right !
wknl is offline   Reply With Quote
Old 05-22-2008, 08:00 PM   #4
Quarry Creeper
 
Join Date: May 2006
Location: Volcano, Hawaii
Posts: 429
Default

With the HR lockouts, you'll only use one 11mm (smaller one) bearing in each side. It'll slide into the lockout body.
crazy_kanaka is offline   Reply With Quote
Old 05-23-2008, 04:50 AM   #5
I joined the Band!
 
Join Date: Mar 2008
Location: All over the place
Posts: 152
Default

Thanks You !

That's what i ended up doing, i just hoped it would be ok.
wknl is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 07:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com