| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
05-07-2008, 01:53 PM
| #1 |
| Newbie Join Date: May 2008 Location: Coolidge, GA USA
Posts: 10
|  Introduction and New Build Thread!! Edge, comp setup
Well i'm new to these parts and wanted to introduce myself and my build I am doing. Name's Chad and I am from Southern GA, and hoping to find some people in the area to start crawling with. This is my first Crawler, but I raced RC's professionally for a couple years and part of the design and research team Unlimited Engineering when they developed the Supermax and then later the truggy design. I build hot rods and custom cars for a living so I was not going to build a plain jane crawler, and figured the Scorpion was the best platform. Parts from numerous sponsors were ordered and should start arriving soon, RPP hobbies, Crawler Store, and CKRC to name a few. This will be a comp ready basher mainly, might start doing comps if I can find some close by. Follow along over the next few days as I a do the build up , thanks to all the things I learned on here from the hours of reading. Build List -AX-10 kit -TCS Edge Chassis -Create a Crawler 6 Spoke AL bead locks -Pro-line M3 Flat irons, w/ memory foam -Black AL knuckles -Black AL C-hubs -AL 3 link connectors -AL link axle mounts -Heavy duty diff locks -EA center skid -Punisher shafts -Hard annodized tranny gears -Heavy duty bevel gears -rear steer lockout -30 degree links -Big bore AL shock caps for stock shocks -Spilt axle plates -Axial hexed hubs -CKRC triangulated electronics mount Electronics- integy V10 55s, with 13 tooth Castle Creations Sidewinder Hs-5995 servo for steer CKRC silt 8 cell 1500 pack |
|  |
| Sponsored Links | |
| | |
|
05-07-2008, 03:11 PM
| #2 |
| I wanna be Dave Join Date: Jun 2005 Location: KENNEWICK, WA
Posts: 2,513
|
Sounds like a good list to follow but we want pics!  Oh yea and WELCOME! |
|
| |
|
05-07-2008, 03:15 PM
| #3 |
| Newbie Join Date: May 2008 Location: Coolidge, GA USA
Posts: 10
|
Thanks!! Pics will start tomorrow. I should start receiving the first pieces of the build tomorrow!! |
|
| |
|
05-09-2008, 07:35 AM
| #4 |
| Newbie Join Date: May 2008 Location: Coolidge, GA USA
Posts: 10
|
Ok got the kit and bunch of teh aftermarket parts in last night. Still waiting on my chassis, and batteries. Worked for about 4 hours last night and got teh Create a Cralwer 6 spokes mounted up with Flat Irons and memory foams, and built the suspension and axles with Heavy duty lockers, rear lockout, Aluminum c-hubs and front knuckles. Still got to find some internal springs and redo the shocks in droop setup.     |
|
| |
|
06-14-2008, 10:05 PM
| #5 |
| Quarry Creeper Join Date: Aug 2007 Location: Amarillo, TX
Posts: 486
|
What ever happened with this build..?
|
|
| |
|
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
