|
| LinkBack | Thread Tools | Display Modes |
01-02-2009, 02:22 PM | #1 |
Newbie Join Date: Jun 2007 Location: Sioux Falls
Posts: 22
| 17mm wheel hub for 5mm axle?
I would like to take some Ofna wheels that I have laying around which take a 17mm hex hub, and put them on my Ax-10. Are there any hubs available that would allow me to do this? I found these, however I do not know if they are for a 5mm axle. http://www3.towerhobbies.com/cgi-bin...?&I=LXTHY6&P=7 Thanks, ElectronJunk |
Sponsored Links | |
01-02-2009, 08:15 PM | #2 |
Pebble Pounder Join Date: Dec 2008 Location: Lake County
Posts: 174
| There's a phone # right on the bottom of the link you posted? Call them and ask.There Axial parts right? Should work. Make them from hex stock if you have to shouldn't be too hard. |
01-02-2009, 08:20 PM | #3 |
Rock Stacker Join Date: Mar 2008 Location: Edmonton
Posts: 64
|
yah those work, ive tried them on my ax10
|
01-03-2009, 09:42 AM | #4 |
Newbie Join Date: Jun 2007 Location: Sioux Falls
Posts: 22
|
I did call the number, and left a message, and received no reply. Also sent them an e-mail with no reply. Also did a search on this forum before posting. I wish I had the spare time and equipment to make my own, but that is just not the case for me. Thanks for the reply. ElectronJunk |
01-03-2009, 09:43 AM | #5 |
Newbie Join Date: Jun 2007 Location: Sioux Falls
Posts: 22
| |
Thread Tools | |
Display Modes | |
| |