DNA SSS proto!!
 

I got a dna sss proto and started building it, Im not very good at the hole build thread thing, I dont like to stop building to take pictures

http://i230.photobucket.com/albums/e...r/DSCF0001.jpg

here is my parts list:

ax10 axles
vp knuckles
vp lockouts
axial clockable c's
axial straight shafts
rcp stainless lockers
HD ring and pinion

ax10 trans
hot racing aluminum gears
dna dig
dna hd motor plate
axial slipper clutch

electronics:

m11 radio
FXR esc
hotwire
45t holmes or 7t cobalt
hitec 645 for steering
hitec 225 for diggin'
cc bec
tcs 8 cell 1500 batteries

2 sets of mayhems i set running hammers and the other running jconcepts rocx!!

Im still waiting on most the parts to come in;-)

http://i230.photobucket.com/albums/e...r/DSCF0005.jpg

http://i230.photobucket.com/albums/e...r/DSCF0006.jpg

is that a scale chassis?

No, its dna's new shockless slingshot comp chassis it using torsion for suspension instead of normal shock"thumbsup"

can you get some better pictures. looks like the torsion bars are below the links. Kind of dumb

the lower links are bent to the same curve and when the susp. flexes the torsion bar is below the links I ordered some 5/16 delrin from mcmaster and im making straight lowers

http://i230.photobucket.com/albums/e...r/DSCF0007.jpg

http://i230.photobucket.com/albums/e...r/DSCF0008.jpg

there we go! now i see it

Torsion rods on the bottom...that will never work :ror: now slam that servo and run it BTA buddy! Make sure the spreader in front of the trans is wider than the skid...just space it out depending on what spur you are running. The spreader will keep the spur from rubbing on the chassis if you do it right "thumbsup"

im waiting on my c's to come in before i do my bta steering currently the steering arm hits the bottom of the upper links"thumbsup"

what kinda material is that chassis made from?

derlin"thumbsup" for the guys that dont know you will need 12mm spacers for the axles

How are you gonna make straight lowers b/c the chassis is your lower links? Hope that you meant that you were gonna make straight upper links.

the chassis still has lower links

http://i230.photobucket.com/albums/e...r/DSCF0009.jpg

finally got it running and I love it only thing I need to change is more weight in the wheels!

still waiting on some part.

its going to side hill good this is with stock ax10 with no weight

http://i230.photobucket.com/albums/e...r/DSCF0015.jpg

http://i230.photobucket.com/albums/e...r/DSCF0014.jpg

http://i230.photobucket.com/albums/e...r/DSCF0013.jpg

http://i230.photobucket.com/albums/e...r/DSCF0012.jpg

I have new wheels coming from mayhem eng. :lol:

it has a very stable and perdicible feel to it"thumbsup"

Looking good! Im anxious to get one of these to play around with

might sell mine for the right price"thumbsup"

8) lmk

Lookin good buddy, now where are the action shots? :ror:

Man that looks so different but very cool. :ror:"thumbsup"

I will be getting action shots in the next few day Im stuck at the shop for a while:x