Harley's MSD Hybrid Chassis Build
 

No offense, but unique shape? It looks like a SWX:? The SSS is a unique shape. Anyway knowing you it will still be a good build.

Kieren

It was out before the SWX but the SW3 was out. ;-)

Build Specs:

• Axial Axles
• Axial BTA with HS Knuckles
• Axial CVD's
• Axial 4-link from TR for the Rear
• Axial Comp Shocks
• Axial Overdrive R&P
• Aluminum C Hubs
• MSD Hybrid chassis with custom laser etched tribal design
• Custom Delrin machined links with CNC machined details
• Holmes Hobbies Torquemaster ESC
• Holmes Hobbies 25t Handwound motor
• Futaba S9157 Servo
• Futaba 4PK
• Vanquish Hurtz Dig
• Vanquish Strait Axle Adapters
• Hot Bodies Sedonas
• Proline Crowd Pleazer
• Nova Foams

Oh, ok but still it looks like a SWX. Your specs all look very nice except one thing a 25t turn motor:shock: If you run that on 3s you will have heat problems and if you run it on 2s it will have jack all torque. Just buy a puller, you will be far better off. Plus pullers are a crap load smoother in my experience. Anyway look forward to further details

Kieren

I have ran cheap 27t motors with no problem just by using the proper gearing. A handwound 25 will do just fine.

Crikey, you must feel like a real clacker now.:oops:

You need to hire this guy Harley, his crawling knowledge is AWESOME!:shock:

Damn I feel like Sheldon on the big bang theory, but Sarcasm?:oops: Lol I already help CrawlerX with some stuff so I would happily help anyone"thumbsup"

Kieren

True I did run grey can motors when my CR01 wasn't in pieces, but they got stupid hot just on a stick pack. I suppose volt up gear down:? Still I think they will run rather hot regardless.

Kieren

No worries, I'm just being a freckle!:-P

So... HB Sedonas are out now:)

be nice Dez maybe he would of bought your pig

Sounds like you have setup issues. Running 3s 1550 packs on 90/14 gearing with a 27t motor run times in the 40 minute range with no heat issues. I've done this a time or two "thumbsup"

Mid December ;-)

I saving it for you. Quit spending my money!:mrgreen:

Hmm might do, but doing donuts might have been the true cause:mrgreen:

Ok:mrgreen:

Kieren

Josh is a big boy, I don't think he posted this build to get help from anyone....."thumbsup"

Ben from MSD sent me a chassis as soon as they were ready, but before he got it in the mail I had him redirect it to my good friend MTHead. I had John put some special touches on my chassis to make it special. He laser etched the chassis's finish to get it back down to the aluminum (thats the silver you see). I am going to carry the Tribal theme throughout this whole build.

http://farm3.static.flickr.com/2492/...d17b8ffc_o.jpg

x 2