| |
03-12-2010, 06:15 PM
| #1 |
| Rock Crawler Join Date: Feb 2010 Location: Hayesville
Posts: 699
|  ESC mounting
Ok I found where people mount there ESC to the front links but I can't figure out how you mounted it I have a CC sidewinder that I am trying to mount and I am stumped..  |
|  |
| Sponsored Links | |
| | |
|
03-12-2010, 06:22 PM
| #2 |
| Newbie Join Date: Nov 2009 Location: Hampton
Posts: 10
|
there should have been a triangularish lexan plate with 4 slots drilled in it that came with your kit. i just loosely zip-tied mine to the top of the links
|
|
| |
|
03-12-2010, 06:38 PM
| #3 |
| RCC Addict Join Date: Oct 2008 Location: Plainfield, IL.
Posts: 1,297
|
Take a scrap peice of lexan, thin aluminum, scrap cd case, whatever, then make a plate and zip tie it to the upper links, put some double sided tape on it and you should be good!  |
|
| |
|
03-12-2010, 07:00 PM
| #4 |
| Rock Crawler Join Date: Feb 2010 Location: Hayesville
Posts: 699
|
worked well Thanks Do people keep there on\off switch near the ESC |
|
| |
|
03-12-2010, 07:26 PM
| #5 |
| Pebble Pounder Join Date: Sep 2008 Location: cny
Posts: 173
|
I bolted mine through the screw that holds on the body mounts
|
|
| |
|
03-12-2010, 07:49 PM
| #6 |
| Rock Crawler Join Date: Feb 2010 Location: Hayesville
Posts: 699
|
Thanks for info now if CKRC will ever get my radio here I will be good to go
|
|
| |
|
03-12-2010, 09:30 PM
| #7 |
| RCC Addict Join Date: Jan 2010 Location: Dallas
Posts: 1,848
| Try the side of the chassis
I know a lot of guys are mounting them on the upper links but I did not want to risk the chance that the lexan would impact suspension so I mounted mine on the inside of the chassis sideways basically and it has worked great. The reciever is on the other side. All of this is at the front. end just under the cross piece.
|
|
| |
 |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
