RCCrawler Forums

THE CRAWLER KING · 08-19-2010, 06:31 PM

Compared to a E-maxx width wise.

Dual steering servo mount.

fred0000 · 08-19-2010, 06:46 PM

Crawler looks good, still waiting on seeing it drive! in time, keep up the good work, with the dualies front and rear I think you could probably bennifit from rear steer, might be worth trying since I noticed your rear axle is a steering axle just locked out.

on a side note, I dont think that E-Maxx will be to much fun to drive with 55t motors. i'd try to find some stock titan motors, i've seen an all stock one with 2x 2s lipos go, man I was impressed, (its what sold me on li-po's) good luck with both builds. I know its not the appropriate forum but i'd like to see the E-Maxx when its complete aswell.

THE CRAWLER KING · 08-19-2010, 06:57 PM

Quote:

Originally Posted by fred0000

Crawler looks good, still waiting on seeing it drive! in time, keep up the good work, with the dualies front and rear I think you could probably bennifit from rear steer, might be worth trying since I noticed your rear axle is a steering axle just locked out.

on a side note, I dont think that E-Maxx will be to much fun to drive with 55t motors. i'd try to find some stock titan motors, i've seen an all stock one with 2x 2s lipos go, man I was impressed, (its what sold me on li-po's) good luck with both builds. I know its not the appropriate forum but i'd like to see the E-Maxx when its complete aswell.

yeah I'm gonna get a Castle Creations Sidewinder with cs5700 kv motor and esc for he E-maxx. Then probaly some 35t teking motors for the Axial. I just need to get another driveshaft cause I snapped one driving it

Yeah I'm gonna see what i can do about the rear steering.

So make it a 6x6 or not?

gunnar · 08-20-2010, 12:15 AM

Quote:

Originally Posted by THE CRAWLER KING

So make it a 6x6 or not?

Isn't it already an 8X8?

Duuuuuuuude · 08-20-2010, 06:24 AM

Holy Hannah Montana! This thing is turning into a monster!

Keep going.

fred0000 · 08-20-2010, 07:07 AM

Quote:

Originally Posted by Duuuuuuuude

Holy Hannah Montana! This thing is turning into a monster!

Keep going.

X2. I vote Finnish it as a 4x4. You are so close. Save 6x6 for a rainy day/winter project . Good luck

THE CRAWLER KING · 08-20-2010, 06:56 PM

Quote:

Originally Posted by gunnar

Isn't it already an 8X8?

No I mean a 3rd axle crawler hence 6x6. Sorry should of been alittle clearer.

Quote:

Originally Posted by Duuuuuuuude

Holy Hannah Montana! This thing is turning into a monster!

Keep going.

Thanks man. Question I'm kinda running out of ideas. So what do i do next?

Quote:

Originally Posted by fred0000

X2. I vote Finnish it as a 4x4. You are so close. Save 6x6 for a rainy day/winter project . Good luck

Thanks man. yeah need to ge more parts and money for the another Axial AX10 Problay a SCX10 is gonna be my next rig.

Duuuuuuuude · 08-20-2010, 07:16 PM

Quote:

Originally Posted by THE CRAWLER KING

Question I'm kinda running out of ideas. So what do i do next?

Rocket boosters.

speed ghilliesniper · 08-20-2010, 07:26 PM

pics of the tranny?

THE CRAWLER KING · 08-20-2010, 07:30 PM

Quote:

Originally Posted by speed ghilliesniper

pics of the tranny?

There in the first or second page of this thread. Whichs mean that means that you didn't look thought the whole thread.

fred0000 · 09-09-2010, 12:20 PM

you havn't given up have you???

THE CRAWLER KING · 11-10-2010, 12:19 PM

No! Just a little shortage in time and money. Plus not quite sure what to do next?

Any ideas about what to do next would greatly help.

cagedcbr · 11-10-2010, 03:48 PM

I love all the lighting, just what I want for my betty body. Seems like you can't have either a shiny crawler or a experiment crawler, one or the other seems to get somewhat negative commenting sometimes. By the way I have a friend who is 35 and still maked things hold with hot glue or PL, Imagine spending almost 2G's on a Baja 5T and using hot glue to hols $h!t on

cagedcbr · 11-10-2010, 03:51 PM

I must have scrolled down to fast, didn't see the pics. What is on your servo ( sorry if I missed it), I assume this is for waterproofing?

THE CRAWLER KING · 11-10-2010, 05:37 PM

Quote:

Originally Posted by cagedcbr

I love all the lighting, just what I want for my betty body. Seems like you can't have either a shiny crawler or a experiment crawler, one or the other seems to get somewhat negative commenting sometimes. By the way I have a friend who is 35 and still maked things hold with hot glue or PL, Imagine spending almost 2G's on a Baja 5T and using hot glue to hols $h!t on

Yeah I was just rushing instead of taking my time. And thanks for the comment about the body top.

Quote:

Originally Posted by cagedcbr

I must have scrolled down to fast, didn't see the pics. What is on your servo ( sorry if I missed it), I assume this is for waterproofing?

Yes it is plastidipped so that it is waterproof. Yes I'm going to get some HOBBYKING high torque servos, they have 354-490 oz of torque and they are only like $60 so I'm gonna get like 3-4 of them, and use one as a winch.

Still need more ideas.

EvilTwin v2 · 11-10-2010, 05:47 PM

Get it outside and drive it already!

Get some pics and or video of it on some real rocks. Better take plenty of spare drive shafts and link ends with you...You'll probably break steering knuckles, too.

THE CRAWLER KING · 11-10-2010, 05:59 PM

Quote:

Originally Posted by EvilTwin v2

Get it outside and drive it already!

Get some pics and or video of it on some real rocks. Better take plenty of spare drive shafts and link ends with you...You'll probably break steering knuckles, too.

It's been quite a while since I got it up and running, can't though cause I need some more motors 2 more in fact. and a new esc.

But when I do get it up and running agian I'll make sure to take pics and videos on some real rocks in downtown with water too. Please more ideas!

EvilTwin v2 · 11-10-2010, 06:01 PM

Quote:

Originally Posted by THE CRAWLER KING

It's been quite a while since I got it up and running, can't though cause I need some more motors 2 more in fact. and a new esc.

But when I do get it up and running agian I'll make sure to take pics and videos on some real rocks in downtown with water too. Please more ideas!

Then don't worry about the other crap. Get it running before you do anything more. How can you see if what you've done so far works or not if you don't run it?

08-19-2010, 06:31 PM	#81
THE CRAWLER KING Rock Crawler Join Date: Oct 2009 Location: Greenville South Carolina Posts: 673	Compared to a E-maxx width wise. Dual steering servo mount. Last edited by THE CRAWLER KING; 08-19-2010 at 06:35 PM.

08-19-2010, 06:46 PM	#82
fred0000 cherry bomb Join Date: Jul 2006 Location: Nanaimo, BC, Canada Posts: 1,598	Crawler looks good, still waiting on seeing it drive! in time, keep up the good work, with the dualies front and rear I think you could probably bennifit from rear steer, might be worth trying since I noticed your rear axle is a steering axle just locked out. on a side note, I dont think that E-Maxx will be to much fun to drive with 55t motors. i'd try to find some stock titan motors, i've seen an all stock one with 2x 2s lipos go, man I was impressed, (its what sold me on li-po's) good luck with both builds. I know its not the appropriate forum but i'd like to see the E-Maxx when its complete aswell.

08-20-2010, 06:24 AM	#85
Duuuuuuuude Suck it up! Join Date: Mar 2008 Location: Arkansas Posts: 11,652	Holy Hannah Montana! This thing is turning into a monster! Keep going.

08-20-2010, 07:26 PM	#89
speed ghilliesniper Quarry Creeper Join Date: Dec 2009 Location: St. Augustine Posts: 288	pics of the tranny?

09-09-2010, 12:20 PM	#91
fred0000 cherry bomb Join Date: Jul 2006 Location: Nanaimo, BC, Canada Posts: 1,598	you havn't given up have you???

11-10-2010, 12:19 PM	#92
THE CRAWLER KING Rock Crawler Join Date: Oct 2009 Location: Greenville South Carolina Posts: 673	No! Just a little shortage in time and money. Plus not quite sure what to do next? Any ideas about what to do next would greatly help.

11-10-2010, 03:48 PM	#93
cagedcbr Quarry Creeper Join Date: Nov 2010 Location: Toronto Canada Posts: 445	I love all the lighting, just what I want for my betty body. Seems like you can't have either a shiny crawler or a experiment crawler, one or the other seems to get somewhat negative commenting sometimes. By the way I have a friend who is 35 and still maked things hold with hot glue or PL, Imagine spending almost 2G's on a Baja 5T and using hot glue to hols $h!t on

11-10-2010, 03:51 PM	#94
cagedcbr Quarry Creeper Join Date: Nov 2010 Location: Toronto Canada Posts: 445	I must have scrolled down to fast, didn't see the pics. What is on your servo ( sorry if I missed it), I assume this is for waterproofing?

11-10-2010, 05:47 PM	#96
EvilTwin v2 I wanna be Dave Join Date: Oct 2005 Location: EvilCrawlerDesigns@comcast.net Posts: 3,510	Get it outside and drive it already! Get some pics and or video of it on some real rocks. Better take plenty of spare drive shafts and link ends with you...You'll probably break steering knuckles, too.

Sponsored Links

RCCrawler Forums

Thread: Project: DUAL AX10