RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial AX-10 Scorpion (http://www.rccrawler.com/forum/axial-ax-10-scorpion/)
-   -   super 300 (http://www.rccrawler.com/forum/axial-ax-10-scorpion/270029-super-300-a.html)

keithgemmill 09-14-2010 07:13 PM

super 300
 
i have a couple questions about the super 300. i have to drill the bevel gear and the wheel hexes out in order for these to work and fit correct? also what exactly am i drilling on the bevel gear to make it fit on the new locker? are the threads one size bigger then stock for my wheel nut. i thought stock was only 4mm and they are saying 300's are 5 mm threads is thsi correct?

Sasquatch81 06-03-2015 09:26 PM

Re: super 300
 
I would like to know this myself ....I would also like to know what kind of aluminum wheels I could use with these?

Highlucks 06-03-2015 10:58 PM

Re: super 300
 
Yes, Yes and Yes.

Drill the central hole of the Bevel gear to 6mm slightly larger is better 6.05mm same with the hexes.
You will need M5 wheel nuts some thing else you will need is 2 of 11 x 6 x 4mm bearings to replace the c hub bearings.

You can use any aluminum wheels you like, but bare in mind they may also require drilling.


All times are GMT -6. The time now is 08:52 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com