Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Heritage Crawlers > Axial AX-10 Scorpion
Loading

Notices

Thread: super 300

Reply
 
LinkBack Thread Tools Display Modes
Old 09-14-2010, 07:13 PM   #1
Rock Stacker
 
Join Date: Aug 2010
Location: Stewartstown
Posts: 85
Default super 300

i have a couple questions about the super 300. i have to drill the bevel gear and the wheel hexes out in order for these to work and fit correct? also what exactly am i drilling on the bevel gear to make it fit on the new locker? are the threads one size bigger then stock for my wheel nut. i thought stock was only 4mm and they are saying 300's are 5 mm threads is thsi correct?
keithgemmill is offline   Reply With Quote
Sponsored Links
Old 06-03-2015, 09:26 PM   #2
Newbie
 
Join Date: Apr 2015
Location: Keizer
Posts: 1
Default Re: super 300

I would like to know this myself ....I would also like to know what kind of aluminum wheels I could use with these?
Sasquatch81 is offline   Reply With Quote
Old 06-03-2015, 10:58 PM   #3
Try to Bend it
 
Highlucks's Avatar
 
Join Date: Aug 2009
Location: Perth Australia
Posts: 3,163
Default Re: super 300

Yes, Yes and Yes.

Drill the central hole of the Bevel gear to 6mm slightly larger is better 6.05mm same with the hexes.
You will need M5 wheel nuts some thing else you will need is 2 of 11 x 6 x 4mm bearings to replace the c hub bearings.

You can use any aluminum wheels you like, but bare in mind they may also require drilling.
Highlucks is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 03:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com