11-29-2010, 02:30 PM | #1 |
Pebble Pounder Join Date: Nov 2010 Location: flagstaff
Posts: 114
| ax10 4link
i made a 4 link set up for the rear axel works good but have noticed pic of 4link mounted on top of axel or left on top right on bottom some low on plate i mounted mine so they are level when rig is sitting
|
Sponsored Links | |
11-29-2010, 02:57 PM | #2 |
Pebble Pounder Join Date: Dec 2009 Location: Earth
Posts: 121
|
When you see pics of one on top and one on the bottom of the plate it's to try and reduce torque twist. If they are both on top it is more likely due to trying to improve the squat/anti-squat. And possibly some TT as well. If you search for Torque twist and anti-squat you'll find a lot more info on it. |
11-29-2010, 04:17 PM | #3 |
Rock Crawler Join Date: Nov 2010 Location: Ohio
Posts: 496
|
I installed an STRC battery/servo/4link plate on my rear axle today, I mounted the links under the plate because over gave me bad pinion angle.
|
11-29-2010, 06:26 PM | #4 |
Pebble Pounder Join Date: Dec 2009 Location: Earth
Posts: 121
| The lower links set the width of the axles and the upper links set the pinion angle. You can adjust your pinion angle by lengthening or shortening your upper links. So when you change the height of the link you'll also need to change the length.
|
12-04-2010, 04:45 PM | #5 |
Newbie Join Date: Nov 2010 Location: bonne terre
Posts: 32
|
What length upper links are u running with the st plate? I'm interested in getting one but don't know what size post to buy and did the plate come with screws for mounting the links?
|
12-04-2010, 09:43 PM | #6 |
Rock Crawler Join Date: Nov 2010 Location: Ohio
Posts: 496
|
I installed it while swapping in the Axial aluminum link kit, I just used the uppers in the kit (55mm) and put 2 link ends on rather than the Y. The plate kit has the plate, 2 aluminum stand offs and 2 screws to mount it through the stand offs on the outer axle bolt points. It also contains a short link for the steering if you are using the plate to reposition the servo. I added a screw in the middle to make it more stable of a mount, and had to add 2 bolts for the link end mounts.
|
| |