Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Axial AX-10 Scorpion
Loading

Notices

Thread: bearings question

Reply
 
LinkBack Thread Tools Display Modes
Old 12-06-2010, 04:57 PM   #1
Quarry Creeper
 
Join Date: Sep 2010
Location: too close to LRC.... Jealous????
Posts: 479
Default bearings question

For both axles you will need :
Eight 10x15x4mm
Eight 5x11x4mm

For the Tranny :
Four 5x10x4mm
Two 8x16x5mm

is this correct for a complete bearing replacement in an ax-10?

I have a gift certificate for avid and need to know which ones I need of what type? (metal, rubber or revolution)
mudn_1 is offline   Reply With Quote
Sponsored Links
Old 12-06-2010, 09:22 PM   #2
Rock Crawler
 
Join Date: Apr 2010
Location: Central FL
Posts: 509
Default

I don't have my parts list handy, but that sounds about right. I've been using rubber-sealed bearings on my rig with no problems.
version_three is offline   Reply With Quote
Old 12-06-2010, 09:38 PM   #3
I wanna be Dave
 
Join Date: Oct 2006
Location: Centered
Posts: 2,082
Default

I run Revolutions in both my Comp rig and my Scaler and really like them. Every bearing I've purchased thus far has been smooth, consistent and they've held up beautifully.

Avid will have my business as long as I'm in the hobby.
CreepyCrawl is offline   Reply With Quote
Old 12-06-2010, 10:10 PM   #4
Quarry Creeper
 
Join Date: Sep 2010
Location: too close to LRC.... Jealous????
Posts: 479
Default

sounds good I am excited to try them, just didnt know which ones exactly.... if someone gets a chance, let me know if those are right
mudn_1 is offline   Reply With Quote
Old 12-07-2010, 09:32 AM   #5
I wanna be Dave
 
Join Date: Oct 2006
Location: Centered
Posts: 2,082
Default

Straight from the original AX10 manual...

5x10x4: 4 Total
5x11x4: 12 Total
8x16x5: 2 Total
10x15x4: 8 Total

If you use a Straight Axle conversion in the rear you'll eliminate 2 of the 5x11 bearings.

I always order one extra of each size; price is right
CreepyCrawl is offline   Reply With Quote
Old 12-07-2010, 10:58 AM   #6
Rock Crawler
 
Join Date: Oct 2010
Location: Chezzetcook Nova Scotia
Posts: 537
Default

My local hobby shop carries every bearing needed for Traxxas vehicles. The 5x11x4 is very common, so is the 10x15x4. I had these bearing for my Slash 4x4. the Traxxas bearings hold up just perfect in my AX10.

Im sure some of the other Traxxas vehicles could use the 5x10x4 and the 8x15x5.

Just offering up a suggestion for anyone in a bind and not wanting to order bearings.
madkawi650 is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 08:21 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com