12-06-2010, 03:57 PM | #1 |
Quarry Creeper Join Date: Sep 2010 Location: too close to LRC.... Jealous????
Posts: 479
| bearings question
For both axles you will need : Eight 10x15x4mm Eight 5x11x4mm For the Tranny : Four 5x10x4mm Two 8x16x5mm is this correct for a complete bearing replacement in an ax-10? I have a gift certificate for avid and need to know which ones I need of what type? (metal, rubber or revolution) |
Sponsored Links | |
12-06-2010, 08:22 PM | #2 |
Rock Crawler Join Date: Apr 2010 Location: Central FL
Posts: 509
|
I don't have my parts list handy, but that sounds about right. I've been using rubber-sealed bearings on my rig with no problems.
|
12-06-2010, 08:38 PM | #3 |
I wanna be Dave Join Date: Oct 2006 Location: Centered
Posts: 2,082
|
I run Revolutions in both my Comp rig and my Scaler and really like them. Every bearing I've purchased thus far has been smooth, consistent and they've held up beautifully. Avid will have my business as long as I'm in the hobby. |
12-06-2010, 09:10 PM | #4 |
Quarry Creeper Join Date: Sep 2010 Location: too close to LRC.... Jealous????
Posts: 479
|
sounds good I am excited to try them, just didnt know which ones exactly.... if someone gets a chance, let me know if those are right
|
12-07-2010, 08:32 AM | #5 |
I wanna be Dave Join Date: Oct 2006 Location: Centered
Posts: 2,082
|
Straight from the original AX10 manual... 5x10x4: 4 Total 5x11x4: 12 Total 8x16x5: 2 Total 10x15x4: 8 Total If you use a Straight Axle conversion in the rear you'll eliminate 2 of the 5x11 bearings. I always order one extra of each size; price is right |
12-07-2010, 09:58 AM | #6 |
Rock Crawler Join Date: Oct 2010 Location: Chezzetcook Nova Scotia
Posts: 537
|
My local hobby shop carries every bearing needed for Traxxas vehicles. The 5x11x4 is very common, so is the 10x15x4. I had these bearing for my Slash 4x4. the Traxxas bearings hold up just perfect in my AX10. Im sure some of the other Traxxas vehicles could use the 5x10x4 and the 8x15x5. Just offering up a suggestion for anyone in a bind and not wanting to order bearings. |
Thread Tools | |
Display Modes | |
| |