good servo?
 

i have the ax 10 rtc and was looking for a better high torque servo

any ideas ???? thanks

oh and i alos have the ae-2 on it

I really happy with my Hitec HS-7955TG. It has 333oz at 6volts, if ya get this get a CC bec as well.

witch one of the cc bec

im runnin a stock servo in the front , the ae-2 , with a split 6 cell 1500 mah on the axle im prob gonna go up the 1800 mah tho...

This CC Bec.

If you're looking at buying batteries, I'd strongly suggest looking at lipos. They give a lot more punch than nimh packs, plus they are smaller and lighter. I upgraded from stickpacks to saddle packs and finally to lipos all within about 3 months. Goin straight to lipo could have saved me over $50.

If you're interested in runtimes, I'm getting 40-50 min on a charge on my 1300mah packs - thats with a 35T motor, 14t pinion, and truck weighing in just over 5.5lbs

For my crawlers, I use the HS-7954SH servo. It has 333 oz in of torque at 6.0 Volts, but can do 403 oz in of torque at 7.4 Volts. Plus, they are cheaper than many others out there.

I really like my Futaba S9157's. I have 5 so far, and not one trouble with any of them. 425oz-in @ 6V.

thats what I have been looking at.... it seems they are overlooked and hobbico is prefered.... why?

I personally like JR servos, they are the best out there. I use the DS8911HV. It dos Torque: 470 oz-in Speed: .12 sec/60°. If fast and powerful. Like any thing else you pay more for the best.

I am running 4 Hitec hs-7955tg and it has yet skipped a beat for me... I have stripped plenty of metal gear servos already but with these I havn't yet.

7950th with cc bec set to 7.4v = 486 oz/in

haha posting your servo is like posting how big your @$#% is ... I ment ego :)

Hitec HS985MG....cheaper and still good, may not need BEC either.