02-22-2011, 06:27 PM | #1 |
Rock Stacker Join Date: Feb 2011 Location: flathead
Posts: 66
| anyone do this ?
Just curious has any of u guys put a hard body on a scorpion
|
Sponsored Links | |
02-22-2011, 06:31 PM | #2 |
Quarry Creeper Join Date: Jun 2010 Location: NTXRCC
Posts: 488
|
No!
|
02-22-2011, 06:33 PM | #3 |
Rock Stacker Join Date: Feb 2011 Location: flathead
Posts: 66
|
Why not
|
02-22-2011, 06:34 PM | #4 |
Try to Bend it Join Date: Aug 2009 Location: Perth Australia
Posts: 3,163
|
Because it would be too heavy and spend most of its time on its lid.
|
02-22-2011, 06:38 PM | #5 |
Rock Stacker Join Date: Feb 2011 Location: flathead
Posts: 66
|
Well wen its done ill c if I can get sum piks up wen the body mounts are finished
|
02-22-2011, 06:43 PM | #6 |
Try to Bend it Join Date: Aug 2009 Location: Perth Australia
Posts: 3,163
|
IMO you are wasting your time and potentially wasting a good hard body. If you are trying to make this into a scaler then you need to get yourself a scale chassis and start from there. But dont let my opinion stop you if it is something you really want to do. |
02-22-2011, 06:45 PM | #7 |
Rock Stacker Join Date: Jan 2010 Location: mount vernon
Posts: 88
|
I did (will kinda), I used an erector set |
02-22-2011, 06:47 PM | #8 |
Quarry Creeper Join Date: Jun 2010 Location: NTXRCC
Posts: 488
| |
02-22-2011, 06:51 PM | #9 |
Rock Stacker Join Date: Feb 2011 Location: flathead
Posts: 66
|
Well I've got two scalers and my dad had his scorpoin... So he's cnc machine out sum rails too extend the chasie so hell be able to move the shox so its getn a prety narly workover
|
Thread Tools | |
Display Modes | |
| |