Another UGC FASTBACK 2 build
 

Just thought I post some pics of the next evolution of my sportman rig. Started with parts from RTC AX10. Went Gate Keeper GC3a chassis.

http://www.centrolinfedema.com/dalla...s/IMG_2040.jpg

Next up was front servo/battery plate. After that I added some home made extended tubes made with K&S aluminum and brass tubing to mount up the XR10 universals, C's and hubs.

http://www.centrolinfedema.com/dalla...s/IMG_2173.jpg
http://www.centrolinfedema.com/dalla...s/IMG_2174.jpg


Here are pics of the new front end


http://www.centrolinfedema.com/dalla...s/IMG_2205.jpg



Here are the pics with the Fast Back 2 Chassis

http://www.centrolinfedema.com/dalla...s/IMG_2489.jpg


http://www.centrolinfedema.com/dalla...s/IMG_2490.jpg


The links are made with 3 of the stock gate keeper links. I added axial long bent link ends at the top rear links. The front upper links are 73mm links from a stock XR10.

I'm working on re-clocking the front C's. Looking at a all the options... Front, Rear and Under the front universal drive shaft.

Re: Another UGC FASTBACK 2 build
 

might wanna rename the thread if your using a gatekeeper chassis!

Looking forward to seeing some pics. In the process now of installing the XR10 steering parts on my sporty as well. Would like to see how you did the tubes.

Re: Another UGC FASTBACK 2 build
 

Definitely gonna need some pics of this build my man. I got my servo/drive shaft issues worked out from the least comp so I am now ready to get my shafty back on the rocks. Turns out my BEC had failed and was not getting the full power to the servo.

Hey Eric how you going with topper you working on, make sure you post some pics up, be good to see what you do. My topper ans chassis nice n light too.

Ben



Sent from my GT-I9100T using Tapatalk