Another UGC FASTBACK 2 build

[Eric Perez]

Just thought I post some pics of the next evolution of my sportman rig. Started with parts from RTC AX10. Went Gate Keeper GC3a chassis.



Next up was front servo/battery plate. After that I added some home made extended tubes made with K&S aluminum and brass tubing to mount up the XR10 universals, C's and hubs.





Here are pics of the new front end






Here are the pics with the Fast Back 2 Chassis







The links are made with 3 of the stock gate keeper links. I added axial long bent link ends at the top rear links. The front upper links are 73mm links from a stock XR10.

I'm working on re-clocking the front C's. Looking at a all the options... Front, Rear and Under the front universal drive shaft.

[hoghead5150]

might wanna rename the thread if your using a gatekeeper chassis!

[d34thw1sh]

Looking forward to seeing some pics. In the process now of installing the XR10 steering parts on my sporty as well. Would like to see how you did the tubes.

[RickM]

Definitely gonna need some pics of this build my man. I got my servo/drive shaft issues worked out from the least comp so I am now ready to get my shafty back on the rocks. Turns out my BEC had failed and was not getting the full power to the servo.

[Oz Bruiser]

Hey Eric how you going with topper you working on, make sure you post some pics up, be good to see what you do. My topper ans chassis nice n light too.

Ben



Sent from my GT-I9100T using Tapatalk