my ax10 is glitching...any ideas? hey guys, my ax10 glitches really bad anytime i get more then maybe 15 feet from it. i switched out the reciever and radio (thinking that was what was causing the problem) but it is still doing it. any ideas on what could be causing it? |
Re: my ax10 is glitching...any ideas? What radio are you using? |
Re: my ax10 is glitching...any ideas? im using the stock radio and receiver |
Re: my ax10 is glitching...any ideas? Which stock radio? The more details you can give the easier it is to get help. Is it the old am radio or the newer 2.4 radio? |
Re: my ax10 is glitching...any ideas? its the am radio. and im using a 27t motor, mamba max esc. lipo batteries (11.1v 3s) |
Re: my ax10 is glitching...any ideas? a 2.4 radio will probably stop the glitching. I had the stock axial am radio and it glitched all the time |
Re: my ax10 is glitching...any ideas? I think you may need caps on the motor when you run the am radio. Try to move the receiver away from the motor. |
Re: my ax10 is glitching...any ideas? Most likely its your radio that is causing the problem...which is why everyone has made the jump to 2.4 systems. Is your rx antenna in a tube or wrapped around something. |
Re: my ax10 is glitching...any ideas? ya, the motor im running now does not have caps on it, im going to switch to my 55t novak and see if that helps because of the caps on it. and right now the rx antenna is wrapped around a plastic wire holder and servo taped on the inside of the roof of my tuber. could that be the problem? |
Re: my ax10 is glitching...any ideas? Quote:
|
Re: my ax10 is glitching...any ideas? Thanks for the advise |
Re: my ax10 is glitching...any ideas? i would say for sure say its the controller |
Re: my ax10 is glitching...any ideas? I had glitching problems with mine and i was running a 2.4ghz rx/tx and turned out to be the stock motor DOA.. It was the Wraith 20t.. |
Re: my ax10 is glitching...any ideas? its not the radio, i switched the radio and recveiver and it did the same thing, i put my novak 55 turn and that solved it, thanks for the help everyone |
Re: my ax10 is glitching...any ideas? So it was the motor? |
Re: my ax10 is glitching...any ideas? sounds like it.. it seems weird because i run a hpi 55t crawling motor in my scx10 honcho with no problems..we'll see what it does after the esc swap im running a novak rooster esc in it right now but that is going in my ax10 today and the AE-2 esc is going in here. |
Re: my ax10 is glitching...any ideas? You will like the AE2. Get the castle link though. I love mine, just fyi lipo cut off is set `ON' from factory. |
Re: my ax10 is glitching...any ideas? I think mostly it was the placment of my rx wire, I put it out the back of the tuber and it doesn't really glitch anymore. But I'm sure putting a motor in that has caps did the trick |
All times are GMT -6. The time now is 01:21 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com