07-12-2012, 08:48 PM | #1 |
I wanna be Dave Join Date: Sep 2005 Location: Dirty South
Posts: 4,064
| Badd's 2.2s say what ?
Parts list goes like this (update 08/19/12) chassis SC-1 proto Not using the axle link mounts with the chassis . custom front and STRC rear plate Links T1E bent and cut to my specs . front uppers and lowers are tie rear lower are tie rear upper are homemade alum . straight Traxxas 5355X alum. Hollow balls threw out . Traxxas Revo rodends shocks Traxxas Bigbores shock cap mod (done with T-maxx rodends) jeepindoug mini T cups mini T red springs on front with 4mm external limiters on the fronts mini T red springs on the rear with 4mm external limiters on the rears and 2mm inside front axle AX-10 case 36/14 (2.5714285) hardend gear Fesnelfest spool Avid bearings XR-10 vanquish products knuckles and Cs XR-10 inter shafts Home made steel Mid tubes Home made BTA sterring Blue Monkey XR-10 knuckle weights Blue Monkey super20tuner kit rear axle AX10 case 43/13 (3:3076923)hardend gears Fesnelfest spool Avid bearings stock lockouts and straight axles trans . Hot Racing alum. gears Stage 3 outdrives NO slipper clutch 87 spur gear Avid bearings Heavy duty motor plate (unknow marker) drive shafts Wildbore with alum. rod pressed inside the male shaft . motor 30t Holmes Hobbies Crawlmaster 13 tooth pinion ESC Holmes Hobbies BRXL (decased) with 10amp castle BEC set at 6v servo JR8711 Wired straight to the bec . Crawler Innovations servo protector drill to remove weight . RX/TX (decased) DX3R / SR3000 (only using 2 channels) wheels Mayhem Evolution front 1" rears 1" hub sizes changes I have 4 setsof hubs tires White Rovers siped a lot foams Crawler Innovations closed cell duel stage Hardline body Painted by me pearl white with metallic black . pics of the chassis more later Last edited by Badd; 08-19-2012 at 08:47 AM. |
Sponsored Links | |
07-13-2012, 09:21 AM | #2 |
I wanna be Dave Join Date: Oct 2007 Location: Houston
Posts: 3,761
| Re: Badd's 2.2s say what ?
This SC1 is a Gatekeeper chassis? Glad to see you back into thhe comp scene, nats 2009 was your last nats right? And you got like 4th IIRC?
|
07-13-2012, 10:36 AM | #3 |
I wanna be Dave Join Date: Sep 2005 Location: Dirty South
Posts: 4,064
| Re: Badd's 2.2s say what ? No the SC-1 is not one of Austins . The guy that designed this chassis lives in Mississippi . There is only 3 of them made that I know of . O8 I finished 4th at East Coast Championship and 4th at Nations in Moab. I took 2nd place over all in the southeast . I ran against the likes of Gatekeeper, RXCrawler, Kamikaze, JoeBruiser, RockCrawler, Fishmaxx, KillerTXT & CSR to name a few from SERCRC . I have not touched a comp rig sence East Coast Championship in 09 (April I think it was). So I am very rusty .
|
07-13-2012, 10:58 AM | #4 | |
I wanna be Dave Join Date: Oct 2007 Location: Houston
Posts: 3,761
| Re: Badd's 2.2s say what ? Quote:
And yes I remember that. That was the last time it was in Moab. Wish I could have been there. That was a different time. You were running your own chassis, Zack had 4 tires on his front axle....I'm sure you will pick it up again no problem. | |
07-13-2012, 11:10 AM | #5 |
I wanna be Dave Join Date: Jan 2008 Location: Arat Alabama
Posts: 2,678
| Re: Badd's 2.2s say what ?
Good to see you back in the comp scene Andy. You still have your MOA stuff also?
|
07-13-2012, 11:33 AM | #6 | |
I wanna be Dave Join Date: Sep 2005 Location: Dirty South
Posts: 4,064
| Re: Badd's 2.2s say what ? Quote:
Last edited by Badd; 07-13-2012 at 01:15 PM. | |
07-13-2012, 11:34 AM | #7 |
RCC Addict Join Date: Oct 2008 Location: south caki laki again
Posts: 1,695
| Re: Badd's 2.2s say what ?
good job! Getter done!!
|
07-13-2012, 11:48 AM | #8 |
I wanna be Dave Join Date: Oct 2007 Location: Houston
Posts: 3,761
| Re: Badd's 2.2s say what ? |
07-13-2012, 12:01 PM | #9 |
I wanna be Dave Join Date: Jan 2008 Location: Arat Alabama
Posts: 2,678
| Re: Badd's 2.2s say what ?
I agree too! It is a fun and competitive class. The 2.2s class is gonna be big next season I believe. Look forward to comping with you some in the future. We just need to get some of these other "retired" farts of the couch now. A lot of those you mentioned in your above post |
07-14-2012, 02:26 AM | #10 |
I wanna be Dave Join Date: Sep 2005 Location: Dirty South
Posts: 4,064
|
I hear you Steve . It wouldbe good to see some of them . Sent from my SCH-S720C using Tapatalk 2 |
07-14-2012, 02:29 AM | #11 |
I wanna be Dave Join Date: Sep 2005 Location: Dirty South
Posts: 4,064
|
I got word from Mayhem Eng. my wheels should go out next week . I got to get some tires on order . I guess it will be Rovers for now with some Crawler Innovations foams . Sent from my SCH-S720C using Tapatalk 2 |
07-14-2012, 11:30 AM | #12 |
I wanna be Dave Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew.
Posts: 7,843
| Re: Badd's 2.2s say what ?
Just when you thought it was safe to comp the return of the Baddness. good to see you building a comp truck Andy, I remember those days well. That chassis looks real nice lot's on battery and equipment room and the geometry will be awesome. |
07-14-2012, 11:47 AM | #13 |
I wanna be Dave Join Date: Dec 2005 Location: Happiness is a warm AK.
Posts: 12,563
| Re: Badd's 2.2s say what ?
Badd things are going to happen. |
07-14-2012, 12:54 PM | #14 |
I wanna be Dave Join Date: Sep 2005 Location: Dirty South
Posts: 4,064
|
More like funny things . I got 6 weeks to build this thing and get ready for nationals . Did I say nationals, yep I got my ticket yesterday . What in the world am I thinking . Sent from my SCH-S720C using Tapatalk 2 |
07-16-2012, 02:10 PM | #15 |
I wanna be Dave Join Date: Sep 2005 Location: Dirty South
Posts: 4,064
| Re: Badd's 2.2s say what ?
I got a small amount done today . I got the rear axle togather . parts AX10 case 43/13 hardend gears Stage 3 locker Avid bearings stock lockouts and straight axles I also got the chassis togather . Shocks are done as well . Traxxas Bigbores shock cap mod jeepndoug mini T cups mini T springs Trans is done also . Hot Racing alum. gears Stage 3 outdrives NO slipper clutch 87 spur gear Avid bearings Heavy duty motor plate (unknow marker) That is a Holmes Hobbies 13t Crawler Master with a 16 tooth pinion gear . more later /thanks for looking |
07-16-2012, 05:20 PM | #16 |
I wanna be Dave Join Date: Aug 2011 Location: Burque
Posts: 3,805
| Re: Badd's 2.2s say what ?
Thats some good progress! Very nice work |
07-16-2012, 07:02 PM | #17 |
I wanna be Dave Join Date: Sep 2005 Location: Dirty South
Posts: 4,064
| Re: Badd's 2.2s say what ?
I got alittle more done this afternoon . I got the front Axle finished . AX-10 case 38/13 hardend gears (2.92) Stage 3 locker Avid bearings XR-10 vanquish products knuckles and Cs XR-10 inter shafts Home made steel Mid tubes . Adds 1/8" per side . Home made BTA (thanks Brian for the BTA and the Mid tubes) Not sure what happened to the steering link though . Looks alittle like a snake to me . lol Really this is a nice peice . It clears everything lock to lock . I got both axles bolted up .The wheelbase is abut 1/8" to long so I will shorten the rears later . more later / thanks for looking |
07-16-2012, 07:16 PM | #18 |
Quarry Creeper Join Date: Jan 2012 Location: Newmarket, Canada
Posts: 236
| Re: Badd's 2.2s say what ?
Hello, Noobish question here sorry, but when I saw your post title I thought you had made your own "2.2s" haha! Is the "s" supposed to represent a different class? Also while I'm on the topic of noob questions, what does class 1, class 2, and class 3 mean? I see them describing scalers and comp crawlers.
|
07-16-2012, 07:16 PM | #19 |
Rock Crawler Join Date: Jul 2011 Location: north little rock
Posts: 979
| Re: Badd's 2.2s say what ?
Nice rig!
|
07-16-2012, 07:43 PM | #20 | |
I wanna be Dave Join Date: Sep 2005 Location: Dirty South
Posts: 4,064
| Re: Badd's 2.2s say what ? Quote:
https://docs.google.com/document/d/1...1pw/edit?pli=1 See rules 2.5 to 2.5.8 for the 2.2s class . There is another set of rules for scale you can find them in the scale rules forum . As for making the 2.2s chassis no I didn't make this one . I have in the past and it is still on the market . They are sold under the Havoc/Hell storm name by JP Customs . I also help Mayhem Eng. a lot with wheels . I have done the Badd 8's / Crazy 8's , Trail Shooters , Slamerz and Buck~Shots Thanks your build is one I have sent alot of time reading over . Last edited by Badd; 07-16-2012 at 07:46 PM. | |
Badd's 2.2s say what ? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Badd's K-5 Blazer | Badd | 1.9 Scale Rigs | 399 | 06-17-2011 09:18 PM |
Badd's K5 Blazer | Badd | Scale Videos! | 15 | 09-09-2009 03:38 PM |
Four.0h (Badd's Berg) | Badd | EnRoute Berg | 89 | 05-28-2009 10:15 AM |
Badd's OCM | Kamikaze | Videos! | 19 | 06-07-2008 03:09 AM |
Thread Tools | |
Display Modes | |
| |