RCCrawler Forums

WooPigSooie · 08-09-2012, 01:09 AM

I started this build in May but I'm just now getting around to finishing it so I thought I would share.

Parts List:

Drivetrain
AX10/SCX10 Axles
Creation Fab Wide Splined Tubes (Front)
Creation Fab Wide Unsplined Tubes (Rear)
XR10 Knuckles
XR10 C-Hubs
XR10 Lockouts
XR10 Universals
XR10 Short Side Straight Axles x2
RCP Lockers (Front/Back)
Under/Over Drive Gears
AX10/SCX10 Transmission
Robinson Racing One Piece Diff/Output Gear
Robinson Racing Idler
Fast Eddy Bearings
RC Screwz Screw Kit
MIP Driveshafts

Chassis & Suspension
Evil Designs "Ringer" Full Kit
Delrin Links (Came With Kit)
Revo Ends
3.5" Big Bores w/ Wicked Ends
Jeepindoug Cups
Mini-T Springs

Electronics
Hitec 7954SH w/ Robitronics Horn and Crawler Innovations Armor
Holmes BR-XL
Holmes 35T Handwound
Ace RC TX/RX

Wheels & Tires
Open Air Wheels (Dlux Style)
Crawler Innovations Double Deuce Foams
Hybrids by Me

Hittman · 08-09-2012, 01:14 AM

Looks really good man. I like those tires

WooPigSooie · 08-09-2012, 01:15 AM

And here is how it sits as of now

WooPigSooie · 08-09-2012, 01:16 AM

Quote:

Originally Posted by Hittman

Looks really good man. I like those tires

Thanks man!

ninja turtle · 08-09-2012, 01:33 AM

Looks awesome. Nice parts list. Is that a bwd trans plate? Didn't see it on the list.

What's your clearance at the front of the skid?
And why not run the rear shocks upside down?

Thanks.

Colgout · 08-09-2012, 01:33 AM

Nice.....

Do you know what is "normal" tyre?

I have my ringer chassis and will start my build thread too.... Mine will be homemade CF plate.

What is your RTR weight?

Highlucks · 08-09-2012, 01:41 AM

Great work on the tyres. How did you find the block/rovers that are pictured in the background?

WooPigSooie · 08-09-2012, 01:47 AM

Quote:

Originally Posted by ninja turtle

Looks awesome. Nice parts list. Is that a bwd trans plate? Didn't see it on the list.

What's your clearance at the front of the skid?
And why not run the rear shocks upside down?

Thanks.

No it's just a poorly deanodized stock plate lol

I'm at 2.5" at the skid but it sits well into the travel so it's right at 2.75" with shocks fully extended.

Clearance issue on the rear shocks.

Quote:

Originally Posted by Colgout

Nice.....

Do you know what is "normal" tyre?

I have my ringer chassis and will start my build thread too.... Mine will be homemade CF plate.

What is your RTR weight?

Normal? What's that?

Carbon Fiber will be cool for this chassis for shure.

3lbs. 12oz. RTR but i haven't added knuckle weight yet

Quote:

Originally Posted by highlucks

Great work on the tyres. How did you find the block/rovers that are pictured in the background?

Thanks man! I made all the tires shown

Highlucks · 08-09-2012, 03:40 AM

Sorry poorly worded question.

How do they perform for you?

Colgout · 08-09-2012, 05:55 AM

3lb 12oz!!! That's excellent.... well done.

Hope mine will be at mid to high 4 lb with kw.

TURBOFEST · 08-09-2012, 07:31 AM

Quote:

Originally Posted by WooPigSooie

3lbs. 12oz. RTR but i haven't added knuckle weight yet

That seems really light...you sure it's 3lbs??

helhedded · 08-09-2012, 08:15 AM

Quote:

Originally Posted by TURBOFEST

That seems really light...you sure it's 3lbs??

He forgot to add that he made some super sweet open-air wheels, that might be where the big drop is coming from.

mmatthews · 08-09-2012, 08:29 AM

I was 4.5 lbs before wheel weights. I need to come out and crawl with you. Glad you finally got it going.

ninja turtle · 08-09-2012, 08:40 AM

Quote:

Originally Posted by helhedded

He forgot to add that he made some super sweet open-air wheels, that might be where the big drop is coming from.

he said it in his parts list.

Quote:

Originally Posted by WooPigSooie

Wheels & Tires
Open Air Wheels (Dlux Style)
Crawler Innovations Double Deuce Foams
Hybrids by Me

looks like you could drop some weight off that robinson output too.

helhedded · 08-09-2012, 08:51 AM

Quote:

Originally Posted by ninja turtle

he said it in his parts list.

..I guess I don't know how to read.

ittybitty · 08-09-2012, 09:51 AM

Are the wheels 1lb lighter than SLW's?

saniel68 · 08-09-2012, 10:47 AM

What is your track width frt. and rear with your wheels? Nice rig.

WooPigSooie · 08-09-2012, 10:52 AM

Quote:

Originally Posted by highlucks

Sorry poorly worded question.

How do they perform for you?

They work great! And with all the shaving I do to them they turn out really light weight.

Quote:

Originally Posted by Colgout

3lb 12oz!!! That's excellent.... well done.

Hope mine will be at mid to high 4 lb with kw.

Thanks!

Quote:

Originally Posted by TURBOFEST

That seems really light...you sure it's 3lbs??

Yup just weighed it again and I picked up 2oz from last night but my scale sucks. So I'm between 3lbs. 12oz. and 3lbs 14oz.

Quote:

Originally Posted by helhedded

He forgot to add that he made some super sweet open-air wheels, that might be where the big drop is coming from.

Yeah I dropped a lot of weight taking off the DHI front wheels.

Quote:

Originally Posted by mmatthews

I was 4.5 lbs before wheel weights. I need to come out and crawl with you. Glad you finally got it going.

yeah I was at 4lbs. 5oz. with the VP wheels. And yes you need to come out and crawl!!

Quote:

Originally Posted by ninja turtle

he said it in his parts list.

looks like you could drop some weight off that robinson output too.

Yeah I could get the Hot Racing aluminum gears and get rid of my MIP shafts to drop more weight. It may happen in the near future.

Quote:

Originally Posted by helhedded

..I guess I don't know how to read.

Quote:

Originally Posted by ittybitty

Are the wheels 1lb lighter than SLW's?

Actually yeah but I had the DHIs up front. My DHIs with 4 stainless weights per wheel weighed 20.6oz total. And now my front wheels weigh 2oz a piece.

WooPigSooie · 08-09-2012, 10:56 AM

Quote:

Originally Posted by saniel68

What is your track width frt. and rear with your wheels? Nice rig.

11" up front. 10.5" out back. Thanks man!

WooPigSooie · 08-09-2012, 11:08 AM

Here is my electronics mounted on the plate that comes with the chassis kit. De-cased my brxl and wrapped it with heat shrink wrap.

08-09-2012, 01:09 AM	#1
WooPigSooie Quarry Creeper Join Date: Nov 2009 Location: Central Arkansas Posts: 309	WooPig's 2.2S "Ringer" I started this build in May but I'm just now getting around to finishing it so I thought I would share. Parts List: Drivetrain AX10/SCX10 Axles Creation Fab Wide Splined Tubes (Front) Creation Fab Wide Unsplined Tubes (Rear) XR10 Knuckles XR10 C-Hubs XR10 Lockouts XR10 Universals XR10 Short Side Straight Axles x2 RCP Lockers (Front/Back) Under/Over Drive Gears AX10/SCX10 Transmission Robinson Racing One Piece Diff/Output Gear Robinson Racing Idler Fast Eddy Bearings RC Screwz Screw Kit MIP Driveshafts Chassis & Suspension Evil Designs "Ringer" Full Kit Delrin Links (Came With Kit) Revo Ends 3.5" Big Bores w/ Wicked Ends Jeepindoug Cups Mini-T Springs Electronics Hitec 7954SH w/ Robitronics Horn and Crawler Innovations Armor Holmes BR-XL Holmes 35T Handwound Ace RC TX/RX Wheels & Tires Open Air Wheels (Dlux Style) Crawler Innovations Double Deuce Foams Hybrids by Me

08-09-2012, 01:14 AM	#2
Hittman I wanna be Dave Join Date: Aug 2011 Location: Burque Posts: 3,805	Re: WooPig's 2.2S "Ringer" Looks really good man. I like those tires

08-09-2012, 01:15 AM	#3
WooPigSooie Quarry Creeper Join Date: Nov 2009 Location: Central Arkansas Posts: 309	Re: WooPig's 2.2S "Ringer" And here is how it sits as of now

08-09-2012, 01:33 AM	#5
ninja turtle Rock Crawler Join Date: Sep 2011 Location: truckee Posts: 918	Re: WooPig's 2.2S "Ringer" Looks awesome. Nice parts list. Is that a bwd trans plate? Didn't see it on the list. What's your clearance at the front of the skid? And why not run the rear shocks upside down? Thanks.

08-09-2012, 01:33 AM	#6
Colgout Rock Crawler Join Date: Aug 2011 Location: Perth west oz Posts: 944	Re: WooPig's 2.2S "Ringer" Nice..... Do you know what is "normal" tyre? I have my ringer chassis and will start my build thread too.... Mine will be homemade CF plate. What is your RTR weight?

08-09-2012, 01:41 AM	#7
Highlucks Try to Bend it Join Date: Aug 2009 Location: Perth Australia Posts: 3,163	Re: WooPig's 2.2S "Ringer" Great work on the tyres. How did you find the block/rovers that are pictured in the background?

08-09-2012, 03:40 AM	#9
Highlucks Try to Bend it Join Date: Aug 2009 Location: Perth Australia Posts: 3,163	Re: WooPig's 2.2S "Ringer" Sorry poorly worded question. How do they perform for you?

08-09-2012, 05:55 AM	#10
Colgout Rock Crawler Join Date: Aug 2011 Location: Perth west oz Posts: 944	Re: WooPig's 2.2S "Ringer" 3lb 12oz!!! That's excellent.... well done. Hope mine will be at mid to high 4 lb with kw.

08-09-2012, 08:29 AM	#13
mmatthews Rock Crawler Join Date: Jul 2011 Location: north little rock Posts: 979	Re: WooPig's 2.2S "Ringer" I was 4.5 lbs before wheel weights. I need to come out and crawl with you. Glad you finally got it going.

08-09-2012, 09:51 AM	#16
ittybitty I wanna be Dave Join Date: Oct 2008 Location: Sumter Posts: 6,141	Re: WooPig's 2.2S "Ringer" Are the wheels 1lb lighter than SLW's?

08-09-2012, 10:47 AM	#17
saniel68 Quarry Creeper Join Date: Jul 2008 Location: Reno Posts: 388	Re: WooPig's 2.2S "Ringer" What is your track width frt. and rear with your wheels? Nice rig.

08-09-2012, 11:08 AM	#20
WooPigSooie Quarry Creeper Join Date: Nov 2009 Location: Central Arkansas Posts: 309	Re: WooPig's 2.2S "Ringer" Here is my electronics mounted on the plate that comes with the chassis kit. De-cased my brxl and wrapped it with heat shrink wrap.

WooPig's 2.2S "Ringer" - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cboggs's the "Ringer"	cboggs	Axial AX-10 Scorpion	54	09-14-2013 08:50 PM
"ringer" sportsman build video	ROLANDROCKSHOP	Videos!	3	06-26-2012 04:47 PM
Who is running an Evil Crawlers Design "The Ringer"	mmatthews	Axial AX-10 Scorpion	20	06-08-2012 05:15 AM
Texas Bell Ringer "Funny Stuff"	Rockpiledriver	Chit Chat	11	11-30-2007 12:53 AM

Sponsored Links

RCCrawler Forums

Thread: WooPig's 2.2S "Ringer"