Gerry´s 2.2s Build
 

Ok - let´s start with the facts:

XR10 Hardline Body with Krawler Konceptz Skinz - Thanks Michelle!
Micro Sidewinder
RCBM handwound 35T motor
Hitec 7950TH
CC BEC
Felsenfest Knuckles
Axial CVD´s
RollerCoaster Chassis (Carbon)
4-Link Accu/Servo Mounting Plate (Carbon)
4-Link Rear Axle Plate (Carbon)
Rear upper and lower Ti-Links 4mm
MIP´s
SCX10 Shocks

Total weight RTR: 1812g "thumbsup"

And here some pics:

http://www.rccrawler.at/forum/download/file.php?id=7687

http://www.rccrawler.at/forum/download/file.php?id=7694

http://www.rccrawler.at/forum/download/file.php?id=9015

http://www.rccrawler.at/forum/download/file.php?id=9018

http://www.rccrawler.at/forum/download/file.php?id=9025

http://www.rccrawler.at/forum/download/file.php?id=9026

Re: Gerry´s 2.2s Build
 

Can is see this interesting rig without the top on?:shock:

Re: Gerry´s 2.2s Build
 

x2 Pretty crazy awesome looking...

Re: Gerry´s 2.2s Build
 

Here you have: "thumbsup"

Re: Gerry´s 2.2s Build
 

Sweet looking chassis. "thumbsup" Definitely different from the norm you see around here.

Re: Gerry´s 2.2s Build
 

Thank you, i drive the RollerCoaster Chassis since 2009 - and 2013 it was time to build it up from Carbon in a Special Edition - glad you guys like it "thumbsup"

Re: Gerry´s 2.2s Build
 

Like this out of the box thinking... Now show us a video!!! ;)

Re: Gerry´s 2.2s Build
 

I´m not sure if someone had filmed today - if it´s so i would post it next time "thumbsup"

Re: Gerry´s 2.2s Build
 

Liking this one!"thumbsup"

Re: Gerry´s 2.2s Build
 

Short video from yesterday - made by "toolman" (User rccrawler.at) "thumbsup"

Crawlers you can see at 10:30min - it´s a short part because the wheather wasn´t good and finally my GT3C quit the job :lmao:

Neujahrscrawl - YouTube

Re: Gerry´s 2.2s Build
 

Ok, next steps on the ToDo list:

-change rear and front upper Links to 4mm Ti Links
-change all the hardware to aluminium hardware
-change the "2009-style" spacers to 6mm Delrin spacers
-change the front alu wheels to plastic wheels like on the rear axles
-maybe place the steering behind the axle

I hope i can do this things on saturday, planned RTR weight are in the moment 1700g "thumbsup"

Re: Gerry´s 2.2s Build
 

Nice! A big "to do" list

Re: Gerry´s 2.2s Build
 

This thing is pretty slick! Nice work

Ok, today i've done some work on the steering:

http://img.tapatalk.com/d/13/01/13/asaperav.jpg


Sent from my iPhone using Tapatalk

Re: Gerry´s 2.2s Build
 

Ok - time to loose weight :lmao:
I have changed some screws with aluminum hardware, the front alu wheels are changed with plastic wheels and the electronic are complete under the Accu/Servoplate (CC BEC, CC Sidewinder Micro and the receiver) "thumbsup"

http://www.rccrawler.at/forum/download/file.php?id=9167

http://www.rccrawler.at/forum/download/file.php?id=9168

http://www.rccrawler.at/forum/download/file.php?id=9169

http://www.rccrawler.at/forum/download/file.php?id=9170

http://www.rccrawler.at/forum/download/file.php?id=9171

And here the actually weight:

http://www.rccrawler.at/forum/download/file.php?id=9172

1581gramms ( 3lb 4.8oz ) :mrgreen:

At the moment the balance is 55:45...
Next i will change the last screws with alu hardware and i´ll change the MIP´s , so i would loose round another 90gramms...
There is also an skidplate where i can loose some weight... i need more time to work on this thing :lmao:

Re: Gerry´s 2.2s Build
 

nice work Gerry, can`t wait to build my 2.2s to see where it ends.

Really like your rear 4 link plate.

and i think you mean 3LB 4.8oz :mrgreen:

Re: Gerry´s 2.2s Build
 

Thank you, can´t wait to see yor build my friend "thumbsup"


:lmao: You´re right, i´ve changed this mistake :lmao:

Re: Gerry´s 2.2s Build
 

Am I missing something? I don't see any front shocks.

The RollerCoaster drive since 2009 without front shocks, the front axle is fixed.

:-)


Sent from my iPhone using Tapatalk

Re: Gerry´s 2.2s Build
 

Today i had 20 minutes time to work on the new driveshafts.

The MIP´s has gone and now i´ve some S.D.I joints connected with 4mm Ti shaft... "thumbsup"
The Weight-Check:

http://www.rccrawler.at/forum/download/file.php?id=9229

http://www.rccrawler.at/forum/download/file.php?id=9230

Built in:

http://www.rccrawler.at/forum/download/file.php?id=9231

And the actually overall weight RTR:

http://www.rccrawler.at/forum/download/file.php?id=9232

1481g (3lb 4.24oz) :mrgreen:

There are some more screws to change, also have to do the new lightweight skid and maybe an lightweight tranny...