RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial AX-10 Scorpion (http://www.rccrawler.com/forum/axial-ax-10-scorpion/)
-   -   AX10 Fastback II (http://www.rccrawler.com/forum/axial-ax-10-scorpion/431537-ax10-fastback-ii.html)

Justynkace 02-27-2013 06:31 AM

AX10 Fastback II
 
I bought a stock AX10 off a friend. I have tuned on it some to make a better crawler. Then I started looking for a chassis to upgrade too. And I found the Fastback II, I decided this would be a great platform to build off of.

This is how it was set before the chassis swap.

http://i1117.photobucket.com/albums/...ps15ccae0d.jpg

This picture shows the 4 link that I set up on it.

http://i1117.photobucket.com/albums/...pse679fd2c.jpg

Justynkace 02-27-2013 06:41 AM

Re: AX10 Fastback II
 
This was the last crawl I took it on before the new chassis was to be installed.

http://i1117.photobucket.com/albums/...ps4318e91d.jpg

Here is a down hill shot on the same course. (This is my personnel rock course at my house:mrgreen:)

http://i1117.photobucket.com/albums/...ps0ea63aaa.jpg

Justynkace 02-27-2013 07:00 AM

Re: AX10 Fastback II
 
Here is the build as of last night. I still need to do a good set-up. I just got it together and put it on the shelf till I can tune this thing. I need longer upper front links, I still need to put my new rear 4 link plate on to clock the rear axle, and make a new set of links for the lower rear links. I will try to find time tonight to get a couple links made. I am going for about 2" from the ground to the skid. So far so good. I really like how this chassis shows off the dig unit.

http://i1117.photobucket.com/albums/...ps9291fbfe.jpg

daddy_ja 02-27-2013 07:11 AM

Re: AX10 Fastback II
 
There is something missing here. What happened to your shock mount crossmember?

Justynkace 02-27-2013 07:27 AM

Re: AX10 Fastback II
 
Quote:

Originally Posted by daddy_ja (Post 4203507)
There is something missing here. What happened to your shock mount crossmember?

I am going to make one out of aluminum and not use the delrin cross member. Like I said I just got it together last night. It is far from being finished. This is just a starting point.

Kitty 02-27-2013 07:43 AM

Re: AX10 Fastback II
 
but one from alu comes in the package.the esc doesn't look to good there,and u should get a servo/battery plate froms STRC,Vanquish or other producers,and yes....those plastic links looks horible.nice rig though,also have a FastbackII that i called "Punisher""thumbsup"

Justynkace 02-27-2013 08:43 AM

Re: AX10 Fastback II
 
Quote:

Originally Posted by Kitty (Post 4203561)
but one from alu comes in the package.the esc doesn't look to good there,and u should get a servo/battery plate froms STRC,Vanquish or other producers,and yes....those plastic links looks horible.nice rig though,also have a FastbackII that i called "Punisher""thumbsup"

My kit didn't come with a alu or any thing for the shocks. and I plan on getting the battery on the front axle. And I am going to get a Holmes BR-XL with a 35 or 45 turn motor. The ESC on it now was just to drive it around my house. Yea tonight I plan on replacing some of the links(The plastic must go:twisted:). I just threw what I had together to get a idea what I needed to do to improve on. This rig is far from done, just give it time. After I get a set of links on it I like, I will post the length of the links for a starting point for other to go by.

daddy_ja 02-27-2013 02:27 PM

Re: AX10 Fastback II
 
If your kit didn't come with it, email Juan.

Kitty 02-27-2013 11:31 PM

Re: AX10 Fastback II
 
yes,got idea,give a mail to UGC to tell that,maybe they will sent u one

Justynkace 02-28-2013 04:56 AM

Re: AX10 Fastback II
 
Juan has one on the way for me. He sent it yesterday for me.

99xjlove 02-28-2013 07:12 AM

Re: AX10 Fastback II
 
That's great. You are going to love it! Extremely capable comp shafty chassis!

Trubble 02-28-2013 08:23 AM

Re: AX10 Fastback II
 
Quote:

Originally Posted by Justynkace (Post 4203646)
.....I will post the length of the links for a starting point for other to go by.

Quote:

Originally Posted by DickyT (Post 2541360)
5/16 delrin lowers, 1/4 aluminum front, delrin rear uppers. Front lowers are 4 1/4 eye to eye, rears are 5 1/16.

... "thumbsup"

Justynkace 02-28-2013 11:18 AM

Re: AX10 Fastback II
 
Quote:

Originally Posted by Trubble (Post 4205382)
... "thumbsup"

My links are going to be a little different lengths. That is the size I started with, but I going for a little different wheel base then DickT done.

Justynkace 03-06-2013 10:38 AM

Re: AX10 Fastback II
 
I got my front shock brace in. And it is now on the crawler. I will post pic's of it tomorrow.

jollyjeeper 05-25-2013 06:06 PM

Re: AX10 Fastback II
 
Updates? link lengths? Pics? Considering ordering this chassis, my only issue is links. I'm no engineer, so any help would be appreciated.


All times are GMT -6. The time now is 05:19 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com