04-18-2013, 04:53 AM | #1 |
Pebble Pounder Join Date: Jun 2009 Location: England
Posts: 119
| Fester's SuDu
After promising myself I would do a build thread for my CC-01 & Wraith and failing miserably I thought I best do one for my 2.2 Crawler build. The plan is to build a capable crawler without breaking the bank Initially I want to keep it simple using as much from my donor SCX as I can, start out with a good base and build from there. Here is a quick teaser shot of the Nordic Crawler Designs SuDu Chassis Parts liberated from my SCX Axles have OD,UD and CVD's Please bare with me on this one for a short while as I collect all the parts I need for the build. Last edited by FesterUK; 04-18-2013 at 05:17 AM. |
Sponsored Links | |
04-18-2013, 05:50 AM | #2 |
Rock Crawler Join Date: Jul 2006 Location: The Netherlands
Posts: 911
|
Nice start. Put a little spacer below the tranny. This way the motor won't touch the chassis. send from my HTC One-X |
04-18-2013, 06:20 AM | #3 |
Pebble Pounder Join Date: Jun 2009 Location: England
Posts: 119
| Re: Fester's SuDu
Thanks for the tip |
04-18-2013, 02:52 PM | #4 |
RCC Addict Join Date: Jun 2009 Location: Australia
Posts: 1,703
|
Look forward to another Sudu build and best of luck with it Sent from my GT-I9300 using Tapatalk 2 |
04-30-2013, 05:06 AM | #5 |
Pebble Pounder Join Date: Jun 2009 Location: England
Posts: 119
| Re: Fester's SuDu
I have not forgotten about this guys, just waiting on parts, sucks to be in England when most of the good stuff is made in the USA, Gunnar body mounts have been ordered along with Vanquish stage 1 kit and a few odd and sods should be a rolling chassis very soon.
|
05-03-2013, 08:48 AM | #6 |
Pebble Pounder Join Date: Jun 2009 Location: England
Posts: 119
| Re: Fester's SuDu |
05-05-2013, 07:43 AM | #7 |
Pebble Pounder Join Date: Jun 2009 Location: England
Posts: 119
| Re: Fester's SuDu |
05-09-2013, 08:37 AM | #8 |
Pebble Pounder Join Date: Jun 2009 Location: England
Posts: 119
| Re: Fester's SuDu |
05-09-2013, 03:10 PM | #9 |
Rock Crawler Join Date: Jan 2011 Location: At home
Posts: 535
| Re: Fester's SuDu
Looking good Fester Are you going to run stock width or are you planning on doing the XR10 mod ?
|
05-10-2013, 01:15 AM | #10 |
Pebble Pounder Join Date: Jun 2009 Location: England
Posts: 119
| Re: Fester's SuDu
Thanka , The plan is stock width for now, trying to keep it simple and the cost down as it's my first 2.2 crawler, I will run it this summer maybe enter a few comps and see how I get on with it, no doubt there will be a SuDu 2.0 build at the end of the summer . I was lucky enough to try out a few rigs last weekend I was surprised how addictive it is compared to scalers I'm really hooked now |
05-10-2013, 01:36 AM | #11 |
Rock Crawler Join Date: Jan 2011 Location: At home
Posts: 535
| Re: Fester's SuDu
I understand ... BUT ... imo it is the best mod you can do to the AX10 (front) axle ... WAY MORE steering angle When you get it done you will probably regret not doing it sooner .... |
05-10-2013, 02:22 AM | #12 |
Pebble Pounder Join Date: Jun 2009 Location: England
Posts: 119
| Re: Fester's SuDu
your probably right however I have the VP stage 1 kit for ax axles on it's way so it will have to wait for now.
|
05-10-2013, 02:42 AM | #13 |
Rock Crawler Join Date: Jan 2011 Location: At home
Posts: 535
| Re: Fester's SuDu
Well ... you already announced your second build ... a nice chance to put the XR10 mod in place Seems like you have been bit by the crawling-bug .... we all were |
05-10-2013, 02:48 AM | #14 |
Pebble Pounder Join Date: Jun 2009 Location: England
Posts: 119
| Re: Fester's SuDu |
05-11-2013, 03:21 PM | #15 |
Rock Crawler Join Date: Jan 2011 Location: At home
Posts: 535
| Re: Fester's SuDu
No sell the Wraith ... you can use it as a donor for a sporty build The XR10 is going to eat your wallet .... I suggest hiding it |
05-12-2013, 02:18 AM | #16 |
Pebble Pounder Join Date: Jun 2009 Location: England
Posts: 119
| Re: Fester's SuDu |
05-19-2013, 07:29 AM | #17 |
Pebble Pounder Join Date: Jun 2009 Location: England
Posts: 119
| Re: Fester's SuDu |
05-19-2013, 04:02 PM | #18 |
Pebble Pounder Join Date: Nov 2012 Location: Stoke on trent , England
Posts: 159
| Re: Fester's SuDu
Love it Rob mate . Looking good , Don't see alot of Cars without Vanquish , I'm a Firm believer as you're aware VP bro Jack. |
05-20-2013, 09:40 AM | #19 |
Pebble Pounder Join Date: Jun 2009 Location: England
Posts: 119
| Re: Fester's SuDu
Thanks jack, slowly getting there |
05-31-2013, 06:26 AM | #20 |
Pebble Pounder Join Date: Jun 2009 Location: England
Posts: 119
| Re: Fester's SuDu |
Fester's SuDu - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
63COMET'S SUDU ONE 2.2Shafty | 63comet | Axial AX-10 Scorpion | 59 | 12-20-2015 10:21 PM |
SuDu One - 2.2s / Sportsman chassis | Tomy | Axial AX-10 Scorpion | 256 | 09-08-2015 06:51 AM |
Alex's SuDu 2.2s. | AlexG | Team Losi Comp Crawler | 70 | 05-20-2014 01:20 PM |
roxx SuDu pro | roxx | Axial XR10 | 18 | 01-17-2014 02:21 PM |
Harvo's SuDu | Harvo | Axial AX-10 Scorpion | 37 | 05-02-2013 07:22 PM |
| |