|
Gerry´s SuDu One FL - CF Axle <3lb Shafty Hi guys - today i´ve started with my new Shafty - because most of the parts are in now "thumbsup" http://www.rccrawler.at/board/index....chmentID=13986 First a few facts: CF/SLS printed axles narrowed Ottsix Voodoo´s Nordic Crawler Designs "SuDu One FL 2.2s Chassis" Nordic Crawler Designs Tranny Nordic Crawler Designs "60° Steering Kit" XR10 Body with "Metallic Flake Inside Skinz" - Krawler Konceptz Grip Fab Locker S.D.I. Drive Shafts (Titan Mod) SCX10 Shocks / Felsenfest Body Mod Vanquish Products C-Hubs Vanquish Products Wraith Knuckles upper links made of CF lower links made of Ti D-Lux Knuckle-Weights Blue Bird HV Servo (Titanium Gears - 35.5kg/7.4V) for testing RCBM Scaleparts handwound 30T motor Castle Creations BEC 10A Micro Sidewinder - maybe i swap it with a Holmes Hobbies TorqueMaster BR Mini The axles are finished now, on the pic you see a prototype from September ´13 - the actual version of it should come in 14 days. A big thanks to all the guys from Ottsix who come out with ideas for designing these awesome axles! Ok, that´s the first impression of my 2o14 shafty build... LG Gerry |
Re: Gerry´s SuDu One FL - CF Axle Shafty I am so excited to see these come to fruition, great work Gerry. "thumbsup" |
Re: Gerry´s SuDu One FL - CF Axle Shafty Great work on the axles, I can't wait to see the build."thumbsup" |
Re: Gerry´s SuDu One FL - CF Axle Shafty Awsome axels, Gerry"thumbsup"...really looking forward to see those parts in detail ...also good choise on the chassies:mrgreen: |
Re: Gerry´s SuDu One FL - CF Axle Shafty Quote:
Quote:
I started today with assembling the SuDu One FL - that´s an awesome chassis, thanks Tomi! That´s the parts you get from NCD: http://www.rccrawler.at/board/index....chmentID=13987 http://www.rccrawler.at/board/index....chmentID=13989 Left side: Skidplate for NCD Tranny - right side: Skidplate for AX10 Tranny: http://www.rccrawler.at/board/index....chmentID=13988 finished the chassis: http://www.rccrawler.at/board/index....chmentID=13990 http://www.rccrawler.at/board/index....chmentID=13992 ... |
Re: Gerry´s SuDu One FL - CF Axle Shafty Quote:
Thanks my friend! |
Re: Gerry´s SuDu One FL - CF Axle Shafty Next step - NCD tranny: http://www.rccrawler.at/board/index....chmentID=13993 http://www.rccrawler.at/board/index....chmentID=13996 To assemble it you need the RC4WD R2 gears: http://www.rccrawler.at/board/index....chmentID=13997 http://www.rccrawler.at/board/index....chmentID=13998 http://www.rccrawler.at/board/index....chmentID=13999 http://www.rccrawler.at/board/index....chmentID=14000 And the tranny is super light weight: http://www.rccrawler.at/board/index....chmentID=14001 ... |
Re: Gerry´s SuDu One FL - CF Axle Shafty Those axles look great, Gerry! "thumbsup" Looking forward to see and read more about them. |
Re: Gerry´s SuDu One FL - CF Axle Shafty Thank you Tomi - your parts are awesome (as always "thumbsup" )! I also have done 3 pics of these awesome Krawler Konceptz "Metallic Flake inside skinz" - they are so great! Thanks Michelle and Rob for your support! http://www.rccrawler.at/board/index....chmentID=14004 http://www.rccrawler.at/board/index....chmentID=14005 http://www.rccrawler.at/board/index....chmentID=14006 |
Re: Gerry´s SuDu One FL - CF Axle Shafty This one went off like a rocket .... "thumbsup" Good choice on parts, specially the chassis. Looking forward to some more pics and details on the rear axle .... where is the front axle ? :mrgreen: |
Re: Gerry´s SuDu One FL - CF Axle Shafty I'm very excited about this, and very happy to have Gerry on our Team! |
Re: Gerry´s SuDu One FL - CF Axle Shafty This is going to be awesome. Very excited to see more custom shafty axles. |
That axle is phenomenal looking. What's it weigh in at? Im really looking forward to this build. Sent from my SM-T310 using Tapatalk |
Re: Gerry´s SuDu One FL - CF Axle Shafty Looks Killer!!!!!!!!!!!!!!!!! |
Re: Gerry´s SuDu One FL - CF Axle Shafty wow man this thing is gonna be sick |
Re: Gerry´s SuDu One FL - CF Axle Shafty Glad you all like it "thumbsup" @chris.martell - the weight is at the prototype around 102g (3,59oz) within the hex mounts and the lockout nuts - the final version should be under 100g 8) |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty Hi Gerry, I like where this is going ;) below 3 lb is really a nice target. Cheers D: |
Whoot Whoot.. thats a nice list. My friend. Sent from my HTC One X using Tapatalk |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty look like so hot that build i hope we will see it soon |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty hi i was asking me which mod you have do on your scx10 shock and curious about your axle ???????? |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty Thanks all! I have switched the SCX10 shock bodys to Egressor´s Felsenfest Body´s - they are way more smoother and are lighter then the originals. The axles uses AX/SCX10 gears and fit the GF Spools - and i can use in these axles Wraith, XR10 or AX10 Shafts or universals - i have just to swap the axle tubes... More info´s i´ll post up when they arrive here :-) |
Ouuuuuhooouh - N I C E !!!! Looks like I'm aiming to the Old School guys with my "new" shafty.... |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty Hi, Nice build "thumbsup" Less 3lbr that seems possible with your axles :mrgreen: |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty Great work my friend!!!! Can't wait to see more.. Like the front axle and some testing!!!!! Can't wait till a very special moment in the near future ;) Hint |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty Hi, Splendid :shock: Are a question, how manufactured these parts? Does it seem that they are moulded? |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty I will assemble the front axle in a few hours Douwe "thumbsup" The parts would be "lasersintered" - it´s similar to 3D printing, but you have a better quality and more options "thumbsup" |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty Looks fantastic! I guess we all want to know when these will be available for purchase, Gerry? :mrgreen: And how durable is the printed material? How do the blue parts compare in strength to Axial plastic parts? |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty Thank you Tomy! We will see - first i have to do a few tests with them... I think the material feels very strong and i´m sure it´s strong as the Axial plastic... But that´s just a feeling, have to test it even more.... |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty nice to see that there are still people who does´t follow the masses. great job, Gerry"thumbsup" |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty Look great Gerry. Great to see new gear being designed and produced. Can't wait to see them on the Chassis. |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty Absolut UBER "thumbsup""thumbsup""thumbsup" |
Gerry is the best! Sent from my EndeavorU using Tapatalk |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty Really awesome stuff happening here. |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty "thumbsup" Just one little more update for today - i changed the axial axle shafts to a 1-piece CF axle shaft, i had to drill out the spool tomorrow and fix the shaft with a screw: http://www.rccrawler.at/board/index....chmentID=14247 2.9oz 8) And a few more pics: http://www.rccrawler.at/board/index....chmentID=14248 http://www.rccrawler.at/board/index....chmentID=14249 http://www.rccrawler.at/board/index....chmentID=14251 |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty These axles are great. You best be building this with blue g10 parts, Chassis and wheels. |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty Simply amazing! :shock: |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty Love this build. What program are you using to model the axle parts? You using one of those online printing places where you upload your 3D model and they build it for you or do you have a hook up? Looking great! |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty Truly awesome"thumbsup" |
Re: Gerry´s SuDu One FL - CF Axle <3lb Shafty Quote:
|
| All times are GMT -6. The time now is 09:28 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com