09-27-2015, 10:51 PM | #21 |
Quarry Creeper Join Date: Apr 2012 Location: france
Posts: 223
| Re: Everett's Sporty
Beautiful build, let's go on the rock |
Sponsored Links | |
10-05-2015, 07:24 PM | #22 |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: Everett's Sporty
So had an issue with the esc and it blew out on me for some reason so I picked up a BR Mini for it... Got it soldered up yesterday... Also threw on some softer springs on the rear and tested it out... Running much much better already... Still clicking in the front axle so I'm trying to get it shimmed up right so it's nice and strong with no clicking... Sadly I won't be out crawling for a while as last evening I broke a tendon in my ankle so I'll be on crutches for the next month and I don't think crutches will go to well on rocks :/ |
10-05-2015, 09:11 PM | #23 |
Newbie Join Date: Nov 2011 Location: san diego
Posts: 25
| Re: Everett's Sporty
oh man looks gnarly hope it heals up fast get you back out crawling is the trans setup your running available or one off ? 2.2s is the next build so I'm making a mental parts list
|
10-05-2015, 09:12 PM | #24 |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: Everett's Sporty Trans is made by Dravtech... You'd have to ask him about it... Not sure if he's selling it yet
|
10-05-2015, 11:19 PM | #25 |
Quarry Creeper Join Date: Apr 2012 Location: france
Posts: 223
| Re: Everett's Sporty
Good luck In how many time you will go up ? |
10-06-2015, 01:02 AM | #26 |
DravTech Join Date: Aug 2012 Location: Sweden
Posts: 643
| Re: Everett's Sporty
Ouch! That do not look pleasent :( The tranny is available. I am just lacking behind badly on making vendor threads... |
10-08-2015, 05:36 PM | #27 |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: Everett's Sporty
So I had this clicking issue in the front axle that would not go away for me... Finally decided last evening I was going to figure out the issue... After quite a while I figured it out... These axles were designed with very tight tolerances so the screw that held the gear to the spools in the axle were sticking out the other end of the spoils slightly and catching on the inside of the axle case... So I pulled out a file and shortened up the screws and made everything smooth... Then I put a few shims in to make the gears nice and tight and so they can't slip at all and it's working great now... Had to try it out so I hobbled out to my pile of rocks to try it out and it's working awesome... Just need some more drive time on this thing but it's performing amazing so far Here's a couple of pics I got out on the rocks today Gotta keep that ankle safe |
10-08-2015, 06:19 PM | #28 |
Pebble Pounder Join Date: Sep 2013 Location: matane
Posts: 151
| Re: Everett's Sporty
nice build,the xr body look awsome cut this way on,i like the way it look like.your axle width are the same lenght than the scxr10 or wraith???
|
10-08-2015, 07:51 PM | #29 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: Everett's Sporty
Those FluffyFlake's look killer in red! Way to work it mang! |
10-08-2015, 08:26 PM | #30 |
Newbie Join Date: Jun 2010 Location: planet earth
Posts: 15
| Re: Everett's Sporty
Love the build, thanks for the updates…I'm on the fence about where to place my servo...How is your servo holding up being that close the rocks? Is it taking a beating?
|
10-08-2015, 09:54 PM | #31 | |||
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: Everett's Sporty Quote:
It is the same width as the AXR10 width... Quote:
Yess they look sweet I love them Btw there's your pic of what I look like now Quote:
It's doing awesome where it is I was worried about it at first but it's not catching on anything at all and it's nice and low where it is... | |||
10-28-2015, 06:21 AM | #32 |
DravTech Join Date: Aug 2012 Location: Sweden
Posts: 643
| Re: Everett's Sporty
Great looking sporty I am glad to see that you are back on the rocks despite your injury |
11-09-2015, 11:32 AM | #33 |
Quarry Creeper Join Date: Jun 2009 Location: Austria
Posts: 340
| Re: Everett's Sporty
wow, this is awesome what i see here! I renovate our house for the last year and moved now with my wife and kids there and slowly time come back to me - time to take a look on all the different boards I´m so glad and happy that you use my axles and that you are happy with them, your rig looks killer man! Keep up the awesome work! With best regards, Gerry |
11-10-2015, 06:38 PM | #34 | ||
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: Everett's Sporty Quote:
Thanks Tobias wouldn't look as good as it does without your awesome products... Me too.. It's been a couple weeks since I've been out driving though cause I broke part of the rear upper link mount on the axle but I'm getting some replacements for that made... As far as my injury the plan is for me to start walking again next week but lots of physical therapy before I'll be back to normal... Quote:
Glad you like it Gerry... I love the axles and so far they're working amazingly definitely a very impressive what you designed... I hope we start seeing you around here more often and see you get back into the comp crawling side of things | ||
12-20-2015, 10:35 PM | #35 |
Rock Stacker Join Date: Sep 2005 Location: prescott
Posts: 75
| Re: Everett's Sporty
Love the build,That is sick. Have to get my hands on a chassis and skid
|
02-07-2016, 10:01 PM | #36 | |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: Everett's Sporty Quote:
Took it out and ran the truck some today... Haven't run it much recently since I just finished the Bully 2 Build... Truck is still running great... Need to work out a few things to get the steering working a little better and I'm going to rebuild the shocks to get them a little smoother... Other then that it's working awesome... The SuDu FL along with its brother the SuDu Mod 3D... I have an XCiter body here all cut up that just needs to be painted for it... | |
02-13-2016, 10:20 PM | #37 |
Pebble Pounder Join Date: Jan 2016 Location: Athens
Posts: 156
| Re: Everett's Sporty
You running Robbobs snowflakes on that hardline rig ? Sent from my iPhone using Tapatalk |
02-13-2016, 10:21 PM | #38 |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: Everett's Sporty |
02-13-2016, 10:22 PM | #39 |
Pebble Pounder Join Date: Jan 2016 Location: Athens
Posts: 156
| Re: Everett's Sporty
I believe he had one pair left . Don shot me over to his page and sure enough the next day they were gone. They look a lot better on the rig . Then in the pictures he shows Sent from my iPhone using Tapatalk |
Everett's Sporty - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Everett's NCD SuDu "Pro"totype | EverettY | Axial XR10 | 111 | 11-30-2015 08:07 PM |
Everett's simple xr project | 8-454 | Axial XR10 | 13 | 07-12-2012 11:00 PM |
Everett's Chaotic Special Pro | EverettY | Axial XR10 | 81 | 04-26-2012 10:20 AM |
| |