Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Axial AX-10 Scorpion
Loading

Notices

Thread: Papa's BWD Nightmare S

Reply
 
LinkBack Thread Tools Display Modes
Old 11-11-2014, 05:32 PM   #21
I wanna be Dave
 
Join Date: Mar 2009
Location: SW Missouri
Posts: 2,172
Default Re: Papa's BWD Nightmare S

Quote:
Originally Posted by doublej View Post
Good to see Im not the only one up before the sun to play with toys.
Gotta take the time when you can make it!

Quote:
I see your output is not drilled - MIPs?
Good eye. Yes, I have always used MIPs on any rig I compete with. However, with the light weight of this new chassis, it seems a shame to use driveshafts that are as heavy as the MIPs. I am seriously considering trying the new HD Wildboars. I've read good things about them, and actually have a set in one of my scalers, but haven't driven it hard enough to really test them yet.
papabash is offline   Reply With Quote
Sponsored Links
Old 11-11-2014, 07:52 PM   #22
Rock Crawler
 
Join Date: Jul 2013
Location: Manchester
Posts: 987
Default Re: Papa's BWD Nightmare S

i run a modded punisher shaft in the front and a modded wb8 in the rear of my rig ...zero issues a little bit lighter than the mip and no bug lip for rocks to get caught on lol
Purptr8r is offline   Reply With Quote
Old 11-11-2014, 09:38 PM   #23
E.Y. Designs
 
Join Date: Sep 2011
Location: Springfield, OR
Posts: 3,592
Default Re: Papa's BWD Nightmare S

There's also the SDI Driveshafts with Ti inserts... very small and very tough... helps to get all that extra clearance that you can possibly get...
EverettY is offline   Reply With Quote
Old 11-12-2014, 04:42 AM   #24
Rock Stacker
 
Join Date: May 2014
Location: Australia
Posts: 54
Default Re: Papa's BWD Nightmare S

Quote:
Originally Posted by papabash View Post
Got a tiny bit done before heading off to work this morning; transmission assembled with all Robinson innards, aluminum spacers, and one of Don's purty motor plates.







Ordered a new Holmes Team Puller 500 this morning, can't wait to bolt it into this!

Hey, just a quick question, what are the size of the spacers you are using in that transmission?
JAYDEN1999 is offline   Reply With Quote
Old 11-12-2014, 05:05 AM   #25
I wanna be Dave
 
Join Date: Mar 2009
Location: SW Missouri
Posts: 2,172
Default Re: Papa's BWD Nightmare S

Quote:
Originally Posted by JAYDEN1999 View Post
Hey, just a quick question, what are the size of the spacers you are using in that transmission?
The motor plate comes with one, the rest are just the stock spacers that I replaced with aluminum for extra strength. They are Axial part number AX1327 for the gun metal grey ones that I used.
papabash is offline   Reply With Quote
Old 11-12-2014, 05:30 AM   #26
I wanna be Dave
 
Join Date: Mar 2009
Location: SW Missouri
Posts: 2,172
Default Re: Papa's BWD Nightmare S

Quote:
Originally Posted by EverettY View Post
There's also the SDI Driveshafts with Ti inserts... very small and very tough... helps to get all that extra clearance that you can possibly get...
I like that idea, may do it. Who makes the Ti inserts?
papabash is offline   Reply With Quote
Old 11-12-2014, 07:20 AM   #27
I wanna be Dave
 
Join Date: Jan 2012
Location: williamsport
Posts: 8,581
Default Re: Papa's BWD Nightmare S

I still run the MIP in the front.. It's low, up front, and Indestructible! With a WB in the rear with a CF tube insert..

But... I did just land some SDI shafts and going to throw one on the rear for testing, before I change the front..

Chassis looks Great! Glad to see ya back papa!
winnerone23 is offline   Reply With Quote
Old 11-12-2014, 07:48 AM   #28
I wanna be Dave
 
Join Date: Mar 2009
Location: SW Missouri
Posts: 2,172
Default Re: Papa's BWD Nightmare S

Quote:
Originally Posted by winnerone23 View Post
I still run the MIP in the front.. It's low, up front, and Indestructible! With a WB in the rear with a CF tube insert..
I kinda like that idea also, but with one of the new HD WBs. I have had modded regular WBs fail...


Quote:
Chassis looks Great! Glad to see ya back papa!
Yep, Don does some great work!
I never really left, just haven't had any thread-worthy builds going on until this one. I have to say, this is probably the most excited I've ever been about a build. Can't wait to get the rest of my parts in and get it together.
papabash is offline   Reply With Quote
Old 11-12-2014, 09:01 AM   #29
E.Y. Designs
 
Join Date: Sep 2011
Location: Springfield, OR
Posts: 3,592
Default Re: Papa's BWD Nightmare S

Quote:
Originally Posted by papabash View Post
I like that idea, may do it. Who makes the Ti inserts?
Fritzthefly is the guy that always makes me mine... you'd just need to figure out measurements for them and you'd be good... I have an extra set of the SDI shafts here that I'm not using if you're interested shoot me a PM...
EverettY is offline   Reply With Quote
Old 11-12-2014, 09:04 AM   #30
I wanna be Dave
 
Join Date: Mar 2009
Location: SW Missouri
Posts: 2,172
Default Re: Papa's BWD Nightmare S

PM sent.
papabash is offline   Reply With Quote
Old 11-12-2014, 04:18 PM   #31
I wanna be Dave
 
Join Date: Jun 2007
Location: Earth
Posts: 2,495
Default Re: Papa's BWD Nightmare S

This build seems like it's going in s....l....o....w.... motion
billet works is offline   Reply With Quote
Old 11-12-2014, 04:36 PM   #32
I wanna be Dave
 
Join Date: Jun 2008
Location: Sin City
Posts: 3,242
Default Re: Papa's BWD Nightmare S

He can send me the parts... Ill even break it in for him.
doublej is offline   Reply With Quote
Old 11-12-2014, 04:50 PM   #33
Rock Crawler
 
Join Date: Jul 2013
Location: Manchester
Posts: 987
Default Re: Papa's BWD Nightmare S

Quote:
Originally Posted by billet works View Post
This build seems like it's going in s....l....o....w.... motion
its been like 5-6 days already
Purptr8r is offline   Reply With Quote
Old 11-12-2014, 04:57 PM   #34
I wanna be Dave
 
Join Date: Jun 2007
Location: Earth
Posts: 2,495
Default Re: Papa's BWD Nightmare S

Just teasing Papa, I know you waited a very long time for me to get it dialed enough to send yours out to you...very long time indeed. We have a few more making their way out to new drivers as well this week finally...one of which left here today.

Back to your regularly scheduled programming
billet works is offline   Reply With Quote
Old 11-12-2014, 04:59 PM   #35
I wanna be Dave
 
Join Date: Mar 2009
Location: SW Missouri
Posts: 2,172
Default Re: Papa's BWD Nightmare S

Quote:
Originally Posted by billet works View Post
This build seems like it's going in s....l....o....w.... motion
Quote:
Originally Posted by doublej View Post
He can send me the parts... Ill even break it in for him.
Quote:
Originally Posted by Purptr8r View Post
its been like 5-6 days already
Hey, a guy's gotta make a living too!
But... I got my new axle cases in the mail today, so I can finally start getting those built up now.
papabash is offline   Reply With Quote
Old 11-12-2014, 05:00 PM   #36
Rock Crawler
 
Join Date: Jul 2013
Location: Manchester
Posts: 987
Default Re: Papa's BWD Nightmare S

Likely story ......LIIIIKKKEEEELLLLYYY STTTOOORRRRYYYYY


Sent from my iPhone using Tapatalk
Purptr8r is offline   Reply With Quote
Old 11-12-2014, 05:02 PM   #37
I wanna be Dave
 
Join Date: Mar 2009
Location: SW Missouri
Posts: 2,172
Default Re: Papa's BWD Nightmare S

Quote:
Originally Posted by billet works View Post
Just teasing Papa, I know you waited a very long time for me to get it dialed enough to send yours out to you...very long time indeed.
Uh, yeah, I wasn't going to mention that...

Quote:
We have a few more making their way out to new drivers as well this week finally...one of which left here today.
Now I've really got to kick it in gear!!!
papabash is offline   Reply With Quote
Old 11-12-2014, 05:03 PM   #38
I wanna be Dave
 
Join Date: Mar 2009
Location: SW Missouri
Posts: 2,172
Default Re: Papa's BWD Nightmare S

Quote:
Originally Posted by Purptr8r View Post
Likely story ......LIIIIKKKEEEELLLLYYY STTTOOORRRRYYYYY
Sent from my iPhone using Tapatalk
Be nice, now...
papabash is offline   Reply With Quote
Old 11-12-2014, 05:08 PM   #39
Rock Crawler
 
Join Date: Jul 2013
Location: Manchester
Posts: 987
Red face Re: Papa's BWD Nightmare S

love you long time
Purptr8r is offline   Reply With Quote
Old 11-12-2014, 05:15 PM   #40
I wanna be Dave
 
Join Date: Mar 2009
Location: SW Missouri
Posts: 2,172
Default Re: Papa's BWD Nightmare S

Quote:
Originally Posted by Purptr8r View Post
love you long time
Okay, not that nice!
papabash is offline   Reply With Quote
Reply



Papa's BWD Nightmare S - Similar Threads
Thread Thread Starter Forum Replies Last Post
Papa's Wraith Re-Build papabash Axial Wraith 72 04-17-2014 07:31 PM
Papa's BrATMOBILE papabash 1.9 Scale Rigs 48 03-01-2014 03:34 PM
Papa's BWD G10 Sporty papabash Axial AX-10 Scorpion 62 06-17-2013 10:14 AM
Kratos Bwd "Nightmare" build Kratos Axial XR10 31 06-10-2013 03:24 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:44 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com