Another CCC Boxer Sporty

[Bergm@n]

Hi there,

I'm opening a thread to show you my little sporty build.

This truck will be based on ClassiCutCustoms products :
- CCC boxer 2.2S chassis
- CCC Ti lower and upper links
- CCC front servo plate + CCC electronic tray
- CCC rear upper link plate
- CCC bulldog tranny + AL spool and main Ti Shaft

Thanks Barry for all the advices, availability and excellent products
This truck will be comp ready, no doubt


This truck will be powered by a Team Brood 30T CONFLUX motor with all Team Brood goodies on it

For sure, I'll have RcBro items on it too : Rcbro beef tubes, steering arms, double ear weigth holders, ...


Teaser pix

[ClassiCutCustoms]

Great start there Bergm@n! It sounds like you have been having fun making parts on your lathe

[Bergm@n]

Yes Barry, I'm having fun with the small lathe

I've worked on my BB : 2 rear ones on the left
- Rc Bro springs
- 30 WT oil to start with

[ClassiCutCustoms]

Very nice Sir! May I suggest you turn the bodies too? It makes them look so smooth!

[Bergm@n]

Yes Boss, bodies will be lathed down in few weeks ;) it's on the TODO list but on the less important things side

[Bergm@n]

Now ... the main shaft of the tranny ...

It was useless for me to do it but I like doing useless things
What about AL 1 piece spool/shaft ?
It would be maybe 1g lighter than the CCC one and for sure, it will have less strength than the main CCC Ti shaft, but I want to play

Let's start !




One side done




Among the chips




After / Before




Draft version, trying to figure out a drilling help to center the drill bit




Test fitting in the CCC Bulldog tranny

[ClassiCutCustoms]

Beautiful work with the lathe. Yes I too have made a one piece locker from 7075 and the results were not worth the efforts. Sometimes just the fun is in trying new things and I understand that too!

[Bergm@n]

Time to speak about ... wheels and share some pix of these beauties





Playing with screws

[ClassiCutCustoms]

Very nice! Bling bling!

[Bergm@n]

Front axle is almost done ...



Specs of front axle :

- OD axial gears
- Felsenfest Zero Slop spool by Egressor
- FastEddy bearings
- XR10 axleshafts
- RcBro al burly splinned tubes
- Wraith VP Chubs
- Wraith VP Knuckles
- RcBro KW holder + Tungsten weight holder
- CCC plate and servo mount
- 7950TH servo
- 3mm Ti steering rods

I'm just missing Chub screws, waiting for final position ...
Rcbro al steering arms soon in the mail

[david511]

very nice

[winnerone23]

Nice DesTroy plate!
Good looking parts list, as well...

[pyranahryder]

Nice build!!! Do you think it is possible to have more pics of your destroy plate, i am building my shafty at this time and use the same destroy plate and would like to see the final result. Thanks

[pat13]

Nice build
Couldn't you put à pic of the Tungsten weight holder ?
Could you tell us where to find them please ?
Thanks.

[david511]

look at pat-store

[Bergm@n]

Thanks for the kind words dudes!

Yes I will post more pix of the plate soon ;)
Pat31, these come from ytown web site.

[Bergm@n]

Playing with the tranny shaft length ...



I'll end up a little longer than this one and put SDI driveshaft front and rear



Some words about the rear axle :
- UD axial gears
- Felsenfest Zero Slop spool by Egressor
- FastEddy bearings
- CreeperBob Ti axleshafts
- ax10 plastic lockouts
- CCC rear plate

[Bergm@n]

hi Folks

Oh ... Yes ... I think I got it rolling




Time to show some pix of this babe :










Kind of steering

[ClassiCutCustoms]

Wow! That looks amazing Bergm@n. Who needs that much steering?? Lol. You have set a high standard for Crawllife..... I hope he can keep up!

[Bergm@n]

You may ask about weight ...





We will speak about it ...
















Here is the weight with 60.5/39.5 bias :




3.3 lbs RTR with 500mAh Brood lipo and 1 oz KW on each side

Now I have to drive it, make some small tuning and spend some time on the body