02-09-2016, 09:39 PM | #21 |
Pebble Pounder Join Date: Jan 2016 Location: Athens
Posts: 156
| Nburns11 BWD nightmare
Okay guys so today I got my work bench and my sitting area in the garage put back together after the move and finally got to do some work to the rig. So I had quite a few things come in the mail during the move . Had my beef tubes and xr mod steering links come in the mail from Dan Davidson over at beeftubes.com. The great one and only don did some magic for me on the Vanquish Products wraith Hubs & knuckles. Then had some China bearings show up also. So we assembled the front and rear axles. I plan on clocking the chubs back quite a bit. I'll need to go buy a tapping kit in the future but let's get it RTR first. Left to purchase is wheels, tires & vp hubs and my servo. r What body's are you guys running ? What body mounts ? Sent from my iPhone using Tapatalk |
Sponsored Links | |
02-10-2016, 12:17 PM | #22 |
Custom Carbon Fiber Join Date: Oct 2007 Location: Connecticut :(
Posts: 4,501
| Re: Nburns11 BWD nightmare
Jealous. That garage is entirely too clean. Many of us use Gunners body mounts, you get a lot in a bag. Hes got them in the Vendor section. Also for bodys you got good choices with Lattice Innovations Derringer ..... Parma Xciter ..... Pro-line bugs if you find them. Last edited by Robbob; 02-10-2016 at 12:22 PM. |
02-10-2016, 09:11 PM | #23 |
Pebble Pounder Join Date: Jan 2016 Location: Athens
Posts: 156
| Re: Nburns11 BWD nightmare |
02-11-2016, 05:15 AM | #24 | |
Custom Carbon Fiber Join Date: Oct 2007 Location: Connecticut :(
Posts: 4,501
| Re: Nburns11 BWD nightmare Quote:
Pro-Line Volkswagen Baja Bug Body 3238 for Rock Crawler | |
02-11-2016, 05:56 AM | #25 |
Custom Carbon Fiber Join Date: Oct 2007 Location: Connecticut :(
Posts: 4,501
| Re: Nburns11 BWD nightmare
Just found it on Amain actually ....... Pro-Line Racing Volkswagen Baja Bug Body (Clear) (1/10th Rock Crawler) [PRO3238-40] | Parts - AMain Performance Hobbies - AMain Performance Hobbies They only show 3 |
02-11-2016, 03:15 PM | #26 | |
Pebble Pounder Join Date: Jan 2016 Location: Athens
Posts: 156
| Re: Nburns11 BWD nightmare Quote:
Sent from my iPhone using Tapatalk | |
02-11-2016, 06:21 PM | #27 |
Custom Carbon Fiber Join Date: Oct 2007 Location: Connecticut :(
Posts: 4,501
| Re: Nburns11 BWD nightmare |
02-11-2016, 06:26 PM | #28 |
Pebble Pounder Join Date: Jan 2016 Location: Athens
Posts: 156
| Re: Nburns11 BWD nightmare
Yes lawd that is beautiful bug body it is Sent from my iPhone using Tapatalk |
02-12-2016, 08:45 PM | #29 |
Pebble Pounder Join Date: Jan 2016 Location: Athens
Posts: 156
| Re: Nburns11 BWD nightmare
Did some electronic work tonight . I shortened the esc and bec 3 pin connectors for a cleaner tighter look . This is with the bec receiver and esc. Sent from my iPhone using Tapatalk |
02-19-2016, 05:24 PM | #30 |
Pebble Pounder Join Date: Jan 2016 Location: Athens
Posts: 156
| Nburns11 BWD nightmare
Thanks to papabashs bit of info and a friendly PIF. I got the transmission mounted those screws won't be falling out again Honestly feel these things are a must for all axial transmissions . So I've been having the run around with my income taxes which is why my build is pretty much at a stand still. So in about 3-5 weeks I'll be finishing this build . Sent from my iPhone using Tapatalk Last edited by Nburns11; 02-19-2016 at 07:36 PM. |
03-09-2016, 11:11 AM | #31 |
Rock Crawler Join Date: Feb 2006 Location: Where the foams are always wet
Posts: 878
| Re: Nburns11 BWD nightmare
Great looking build! Subscribed! |
03-12-2016, 12:18 AM | #32 |
Pebble Pounder Join Date: Jan 2016 Location: Athens
Posts: 156
| Re: Nburns11 BWD nightmare
Thanks tom . Really appreciate the knuckle arms man. Sent from my iPhone using Tapatalk |
03-28-2016, 04:00 PM | #33 |
Pebble Pounder Join Date: Jan 2016 Location: Athens
Posts: 156
| Re: Nburns11 BWD nightmare Well sorry I left the thread high and dry . But it's finished let's see if I can remember where I left off . I'm running the vp hubs 475s in the front and 250s in the rear with Rcbros 3 piece wheels mounted to those and mounted on my wheels is some voodoos pins in silver compound ultra narrowed by Everett young at ey designs. I'm running Rcbros extended knuckles in the rear of the vp knuckles so I could run my steering link under the pinon on the front axle . Powering my steering is a hitec 7980tg Jesus 611ozs of torque is overkill . Now I'll be getting some serious wheel time on this thing this weekend April 2nd and the 3rd . Can't freaking wait took it out in the neghibors backyard for a little test run and Jesus crawls beautiful .this thing is beautiful thanks don @ billetworksdesign.com I absolutely love this rig Sent from my iPhone using Tapatalk |
03-28-2016, 05:11 PM | #34 |
I wanna be Dave Join Date: Mar 2009 Location: SW Missouri
Posts: 2,175
| Re: Nburns11 BWD nightmare
Good looking rig, glad you like it so far. |
03-30-2016, 07:41 PM | #35 |
Pebble Pounder Join Date: Jan 2016 Location: Athens
Posts: 156
| Re: Nburns11 BWD nightmare Thanks David . Long time build and absolutely love this animal . I just got the new rear link mount in today in g10 and the motor cover shipped in from don. That dude right there has a huge heart and is just simply a awesome dude. Waiting on my shock razors to get its final stance currently sitting here Sent from my iPhone using Tapatalk |
04-10-2016, 09:25 AM | #36 |
Pebble Pounder Join Date: Jan 2016 Location: Athens
Posts: 156
| Re: Nburns11 BWD nightmare
So I ordered some underdrive gears for the rear axles already running overdrive gears in the front . Also ordered lockedup rcs slipper eliminator and Rcbros knuckle weights last night . Waiting on a few parts from don then I'll be installing new parts . And ordered the 700pc hardware kit from team knk Sent from my iPhone using Tapatalk |
04-13-2016, 04:34 PM | #37 |
Pebble Pounder Join Date: Jan 2016 Location: Athens
Posts: 156
| Re: Nburns11 BWD nightmare Lockedup slipper eliminator showed up today along with the team knk monster bag of 3mm screws. Got that installed. Installing a new rear link mount in blue carbon fiber which I may add looks amazing More mail tomorrow so another update tomorrow Sent from my iPhone using Tapatalk |
04-13-2016, 05:07 PM | #38 |
RCC Addict Join Date: Aug 2012 Location: The Garage!!!
Posts: 1,386
| Re: Nburns11 BWD nightmare
Very very nice! Love the blue cf too |
04-13-2016, 09:29 PM | #39 |
RCC Addict Join Date: Nov 2007 Location: somewhere
Posts: 1,405
| Re: Nburns11 BWD nightmare
Looks good man... love the kid "do it do it" in the video that's awesome sounds about like my boy
|
04-14-2016, 02:46 PM | #40 |
Pebble Pounder Join Date: Jan 2016 Location: Athens
Posts: 156
| Re: Nburns11 BWD nightmare
Knuckle weights came in today from Rc bros. Looking good can't wait to see the difference in performance . Also had some underdrive gears show up today gonna get these installed today also . Ordered a spektrum dx4s this morning that and my hitec x4 should be showing up on Monday . Sent from my iPhone using Tapatalk |
Nburns11 BWD nightmare - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Papa's BWD Nightmare S | papabash | Axial AX-10 Scorpion | 392 | 11-26-2018 04:22 AM |
A nightmare on purp street ... Bwd shafty | Purptr8r | Axial AX-10 Scorpion | 104 | 03-27-2015 05:47 AM |
Kratos Bwd "Nightmare" build | Kratos | Axial XR10 | 31 | 06-10-2013 03:24 PM |
Thread Tools | |
Display Modes | |
| |