Rainbow Dash (Y-town 2.2S) I was "fortune" to test Zarizis and Arttus crawler last summer. That started little thinking in my mind. Hmm... should i build 2.2S??? Maybe even mod??? And then the sh*t hit the fan... I heard that there was 2 good crawlers 4 sale. I didn't have any choise... Fire in my mind was 2 strong i couldn't say no. New driver & renamed car(s) ;) http://goo.gl/hInr0K?gdriveurl -Specs:- Chassis: Y-town villain chassis Gearbox: Axles: Shortened AR60 whit tubes and OD front UD back Vanquish wraith knuckles and little weight :) Vanquish chubs Driveshaft: WB8 Shocks: SCX10 shocks Electronics: CC MicroSW & CC Bec Motor Team Brood Sisu :) Hitech HS-7950-TH servo Wheels: narrowed voodoo golds 6.0soft CI comp cut front 5.5med CI comp cut rear And some pictures from the car. Only thing i have done to the car is. New tyres and foams. Little wiring job. http://goo.gl/iefP1K?gdriveurl http://goo.gl/FsI6w3?gdriveurl http://goo.gl/WTPh6H?gdriveurl http://goo.gl/V9iNp8?gdriveurl http://goo.gl/xG4Kb3?gdriveurl http://goo.gl/EDaGMJ?gdriveurl http://goo.gl/01kc8l?gdriveurl http://goo.gl/buvTwp?gdriveurl See u all in the worlds :) |
Re: Rainbow Dash (Y-town 2.2S) Time to update this topic! http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Anybody recognize the car? :ror: http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg I have now four comps behind with this car. And i like it a lot. The setup is good for my driving style. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg I like the Crawler Conceptz skins alot! Hopefully i have money before worlds. So i can order new skins from Crawler conceptz Rainbows dash is not dragon! :lmao: http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Down hilling i have to train more. little bit tricky with this car. And that's not the only thing to train ;-) http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg I was very happy for my standing in nordics -16 6th with this training amount "thumbsup" http://skeidarutto.kuvat.fi/kuvat/No...g/_smaller.jpg http://skeidarutto.kuvat.fi/kuvat/No...g/_img1280.jpg Last weekend was finnish series comp 2/6 2016 I was 4th in that comp. Only 2pts away from 3rd place :lmao: http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Here is video from the comp. I think it was course 3/4. <iframe width="560" height="315" src="https://www.youtube.com/embed/lI4_wqWwTYY" frameborder="0" allowfullscreen></iframe> Only way is up the ladder! "thumbsup" |
Re: Rainbow Dash (Y-town 2.2S) I had little time to train this weekend! 3 Times in one weekend! Tripled my trainin with this vehicle "thumbsup" I made little presentation video from the rig :twisted: <iframe width="560" height="315" src="https://www.youtube.com/embed/1JKZdk9GeRU" frameborder="0" allowfullscreen></iframe> Little playing with video editing. My thirteenth video edited "thumbsup" |
Re: Rainbow Dash (Y-town 2.2S) Time to update this thread. I have been training every week 1-3 times and it's starting to show. I can drive lines that was impossible for me at the start of summer. I had time to go two comps also "thumbsup" First comp was Finnish Rc Crawling Series -16 #3 Jämsä 1st place in there!! Ok Only 3 drivers on the comp and all the best drivers away. Holiday season. :cry: Fun day still. Good courses and tricky terrain. Sometimes it was like driving on the ice. Sand made the rocks very slippery. My slick voodoo tires in the 2.2M didn't work at all!! http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg second comp was Rfot Crawl Cup -16 #4 Pirkkala Day started little odd... Our comp place was taken by trick bicycle comp. We had to get new spot for the comp. Luckly Rfot(Sarka) ppl had other place. After the first shock it was good day. Very hard terrain to master. Forrest rocks. Hard to flip car around. Fun day overall. "thumbsup" 3rd place in that comp. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....JPG/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....JPG/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....JPG/_full.jpg Next comp next weekend! Finnish Rc Series #4/5 in Naantali. Can't wait to get there. I have seen pictures from the comp place and it looks amazing. Mr.Dravtech is coming there to comp also :ror: Little update coming to the rig. New body cutted. New body Parma Xciter body like the old ones. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg I could have painted it my self but... http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg When u look at this and then u look at your self painted drifter... http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg U know it's not enough! So new body cut and send away for better hands :mrgreen: Rainbow dash theme coming <3 |
Re: Rainbow Dash (Y-town 2.2S) We had our #4/5 Finnish series comp in Naantali. I was on 4th place :ror: Rainy and windy morning. it was hard to make courses becouse so slippery. I was testing new lines so got couple gates becouse they didn't work. Still learning "thumbsup" http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Intteresting situation in safty class next saturday. Last comp for this season. And look who is 2nd??? !!! http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Funny comp ahead next saturday :) Here is video from the Naantali comp. <iframe src="https://www.youtube.com/embed/AydhSQXO1hs" allowfullscreen="" width="560" frameborder="0" height="315"></iframe> |
Re: Rainbow Dash (Y-town 2.2S) It's time to update this thread again. :shock: Lot have happened after last update. Let's start from the last Finnish National series comp #Rauma 5/5 2016 http://skeidarutto.kuvat.fi/kuvat/Ra....JPG/_full.jpg Huh difficult day it was. It started raining and the rocks where slippery as hell :twisted: http://skeidarutto.kuvat.fi/kuvat/Ra....JPG/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....JPG/_full.jpg Not so good day for me. Some gates turned out impossiple to drive and allready i had points full :( Overall feeling good. Difficult gates and stupid drive lines. But i have to test and learn :lmao: http://skeidarutto.kuvat.fi/kuvat/Ra....JPG/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....JPG/_full.jpg Darra news reporter Arttu filming some shitty footage to our show :lmao: http://skeidarutto.kuvat.fi/kuvat/Ra....JPG/_full.jpg 4th place at the comp. "thumbsup" http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg That secured my 2nd place on Finnish national series overall! 8) Not bad first year :shock: http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....JPG/_full.jpg And ofcourse this is not the end for this year... Let's continue in new post. Of course this would crash if long post :evil: |
Re: Rainbow Dash (Y-town 2.2S) After the Rauma finnish nationals we had something special 8) We organized 2 events on same weekend. Rented cabin for our use nearby the comp place. It was nice place 8 people fitted nicely in there 8) Saturday we had Hangover gatepuzzle Scale event with 2 courses. About 200 gates to drive and no winners "thumbsup" http://skeidarutto.kuvat.fi/kuvat/Ha....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ha....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ha....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ha....jpg/_full.jpg It was relaxing to go just drive and no worries about the clock on course. After driving to the cabin and sauna and hot tub. Maybe couple beers ;-) On sunday we had historical event. The last RFOT's Crawl Cup event in history! Nice comps good memories. This is not the end. Start for something new :ror: 4th place again. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg I live near this place. 30min drive. It is nice place to train and comp. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg My friend drived with my cars that day. I'm trying to lure him in the crawling :twisted: http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg I think the seed has been planted 8) Now it's good to start prepairing for the worlds. Comp season is over in Finland. Winter is coming!!! |
Re: Rainbow Dash (Y-town 2.2S) Time for little maintaince for the car before France worlds :ror: Car has been working whole season. Couple drive shafts and nothing else broken! I think it has been tested to it's limits. I think samu can say the same. He has seen mee "driving" :lmao: So car to the tabble and let's have a look. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Filled the shocks with 50th oil front and rear. Opened the difd covers and everything was ok there. Then i took the gearbox off... http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg 1 Bearing has something lost?!? Opposite side bearing loose. Ofcourse no shop in Finland got them!! Lucky Arto (R2) had couple extra in his shelf and he send me "thumbsup" http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Gearbox back in order. I have to say this Hulksta gearbox is good! No wearing on the gears or the carbon. Somekind of cover would be nice. Couple weeks before France painter started making me new body. I was getting little scared could he make it in time :shock: http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg It was about week before leaving to worlds when i got the next images... http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg It was friday when postman delivered the box from Totte. It had 2 bodies in it. One for my team mate Arttu and one for me. Now i can call it official Rainbow Dash!! :lmao: I wanted new shock spring covers to match the body. So quick measurements and sitting in front of the screen. Made my first 3d model. Need to make adjustments to it. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg I Made little tuning in the rear. I have been thinking the rear is too stiff. Wanted little more twist to it. Moved the rear upper links one hole nearer to each other. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Had to curve the axle little bit to get the nut to fit. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Now i like how the rear travels. We will see how this setup works in France.8) |
Re: Rainbow Dash (Y-town 2.2S) http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg France worlds over. Huh what an event! Big thanks to organizers. U guys made amazing work "thumbsup" Beer, pizza & food service on the beach "thumbsup" Short walk to comp site from the comp village. Under 10min "thumbsup" Restaurant dinner in the evening was nice. Good food and good company. Comp village offered brilliant place for meeting other ppl in crawling. Weather was wat it was... Weather on friday (1.9 / Super) :twisted: Weather on saturday (2.2M) 8) Weather on sunday (2.2M Finals / 2.2S) :cry: That don't matter. So much fun!!! http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Drizzt Do'Urden & Rainbow Dash first time on the comp site. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg It was so different to drive in those rocks. The rock has so much traction in it. Finland we have this slippery rocks only. It was so fun driving in there. Changing the rear links place made big difference. Now it moves much better for my liking. Not what i want but closer. Here is couple pics more. No pics from the comp... LAZY :flipoff: http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg And where did i find my self on the score board? http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg 9th out of 54 drivers! I had good feeling hole day and the car worked perfectly "thumbsup" Here is 1 video from the comp :) <iframe width="560" height="315" src="https://www.youtube.com/embed/8s0i9hGp_gI" frameborder="0" allowfullscreen></iframe> Good ending for my first year in crawling. Winter is coming in Finland so no more driving. :cry: Now it's good time to hide in the garage :mrgreen: http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg |
Re: Rainbow Dash (Y-town 2.2S) It was time to say good bye to narrowed AR60 in the front. In rear i will keep the narrowed Ar60 with Xr lockouts. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Short side was normal lenght. Long side was narrowed about 2cm. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg With narrowed axle i didn't get enough steering for my liking. And there was no room for more steering angle. So now testing full widht AR60 in the front. So it was time to take new and some used parts to the table. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg I think this was supposed to go here and hold the servo stand...? http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg It was 2 small i think... I couldn't trust it would hold in my beating. So little bit longer worm and we are good to go :ror: http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Now i can trust that it will hold. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg So here we have the trust installed on the axle. LOOKING GOOD! :twisted: http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Time for little Beefing :twisted: http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg In the narrowed version i didn't have tubes inside... Ok 2cm piece in the narrowed part to get them hold together. These tubes are from asiatees. Ok quality and prize. 14€ for axle. Ofcourse the metal is not the same level as the Original Beeftubes. I have 2 set's of them in the shelf. I don't want to use them to this project Because... :roll: http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg I'm going to machine them open from upper part. :shock: Old axle had original plastic link/shock mounts. Now testing VP versions that i had in my wraith. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Starting to look like winner axle ;-) I like how the servo is sitting low. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg "New" locker. This is used in my wraith for over 1 year in brutal use. Still zero sloppy. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Old one is VP aluminium locker... No set screws so they were sloppy. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg So it was time to but them in scale... Steel vs Aluminium! :shock: http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Steel won! :shock: Ok it's machined much smaller. Aluminium locker that size would brake very easily. I think with set screws the aluminium version would weight 19g. Not big difference in weight. So it was time to attach gear to the locker. This is old OD gear from the narrowed axle. I can't see any wearing. I don't know how old this is. I have driven 1 year and don't know how long Manu used it before that. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg So it was time to take the shafts to some tweaking to get more steering angle. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg It was time look at the weights in the front. VP versions weights. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Old axles had 240g of weight. Now i think i don't need so much becouse the tubes in axle. So little sawing and we are good to go. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Now i have 100g weight per side. These weight's are machined nicely. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg They don't fit to my knucles so... Little twaeking is needed for these to fit. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg I got these little bad boys from the Nordics -16 sponsor gift suffle. Time to take them to action. Old axle had BTA so there was only 1 in the front. Now i need them both side becouse the steering rod comes in front. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Axle "installed" I need new titanium upper links. First some testing to get the lengt. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Old links are about 1,5-2cm short. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Need to change the electronic plate mount place. So the servo sit's little lover and ofcourse the electronics. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Got my self 3d printer :) http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Now i think i have more motivation to train how to make 3d models I don't have to wait that my friend has time to make the print. First part for my safty. Rear weight holder. This is only prototype made from PLA. I think i will make the final version from BLA and if i can get Nintek Armadillo then make them from that. Armadillo Shore Hardness = 75D Abrasion resistance 84% better than PLA and 60% better than ABS https://ninjatek.com/products/filaments/armadillo/ http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg Fitted nicely for these wheels. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg They are little bit out from the wheel. That don't matter becouse i have to make the rear little narrower so then they will go inside of the wheel. http://skeidarutto.kuvat.fi/kuvat/Ra....jpg/_full.jpg This is all for now... more in the near future 8) |
Re: Rainbow Dash (Y-town 2.2S) Nice "thumbsup" I think you will like the full width Wraith axle,- I really like it "thumbsup" : |
Re: Rainbow Dash (Y-town 2.2S) New video from the rc crawling words 2016 France <iframe width="560" height="315" src="https://www.youtube.com/embed/XzD5LAX05fI" frameborder="0" allowfullscreen></iframe> |
Re: Rainbow Dash (Y-town 2.2S) Damn whole crawling season 2017 is over and i haven't updated my build threads. :evil: Ok i have been busy studying video editing and other stuff... Now i have time so let's continue where we left the story. ----------------------------------------------------------- Let's continue where we left in the winter... https://skeidarutto.kuvat.fi/kuvat/R...4.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...0.jpg?img=full When i ordered Front servo & link thrust also ordered rear link trust. Then i realized it won't work with my narrowed Ar60 axle. Center point is different in narrowed ar60 than normal widht. https://skeidarutto.kuvat.fi/kuvat/R...3.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...1.jpg?img=full there is small aluminum tube inside where the screw go. This can take some serious beating. 20ft drops and so on... https://skeidarutto.kuvat.fi/kuvat/R...1.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...2.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...1.jpg?img=full So old trusty y-town rear trust. I think it's made by y-town? :roll: Somebody wiser can tell. https://skeidarutto.kuvat.fi/kuvat/R...1.jpg?img=full I think it's missing something? Is it trying to learn to fly or something? Who knows... https://skeidarutto.kuvat.fi/kuvat/R...9.jpg?img=full What do u got there? https://skeidarutto.kuvat.fi/kuvat/R...9.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...6.jpg?img=full 3mm Titanium rods i see :twisted: Time to make some upper links. https://skeidarutto.kuvat.fi/kuvat/R...7.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...1.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...1.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...4.jpg?img=full precise measurements and let's cut. :lmao: https://skeidarutto.kuvat.fi/kuvat/R...1.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...3.jpg?img=full Links ready. Here is tools that i used + WD40 for lubrication :lmao: Tools were ok for this job. Not the hardest grade titanium. https://skeidarutto.kuvat.fi/kuvat/R...0.jpg?img=full I like how full widht axle turns much more than narrowed did. Here is good spot to stop writing. 2nd time doing this write up. 1st time pushed back button... I had written much more than this :evil: |
Re: Rainbow Dash (Y-town 2.2S) That is indeed an original Y-town rear plate, with an old Rowdy truss for narrowed AR60's. |
Re: Rainbow Dash (Y-town 2.2S) What grade ti do you use? Sent from my iPhone using Tapatalk |
Re: Rainbow Dash (Y-town 2.2S) Quote:
I would not make any longer links from it. They will bend easily. Ok u need 10-15ft drop to get them bend. That's not good enough for me. For next year i will order better grade titanium. |
Re: Rainbow Dash (Y-town 2.2S) 3mm is not going to last long but the 4mm with some revo rod ends will hold on pretty good, especially if you use a torch to bend it. I have found out that bending it like that it kind of locks the bend in, plus you can make tighter bends with minimal risk of braking. |
Re: Rainbow Dash (Y-town 2.2S) Links ready so it was time to tinker with the propeller shafts. https://skeidarutto.kuvat.fi/kuvat/R...8.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...1.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...4.jpg?img=full U can see that i had some problem with the drive shaft. Axial WB8 HD shaft is hitting the link in the rear. Not good at all :evil: Also in the front it gets bended easily. even with the glued aluminum tube inside. https://skeidarutto.kuvat.fi/kuvat/R...1.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...1.jpg?img=full It was time to make order from SDI https://skeidarutto.kuvat.fi/kuvat/R...5.jpg?img=full S.D.I PROPELLER SHAFT (5mm to 5mm) --Link to S.D.I page-- Very good shafts i can say. My team mate has been running them 2-3years without any breakage. I drived this season without any problems. Also they are lighter and smaller than old Wb8 Hd "thumbsup" https://skeidarutto.kuvat.fi/kuvat/R...3.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...1.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...6.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...0.jpg?img=full They were very easy to shorten to right lenght. https://skeidarutto.kuvat.fi/kuvat/R...9.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...8.jpg?img=full They come with short set screw that i changed. Axial diff outputs have holes so i had laying around these longer screws.(Don't know what they are called) :oops: Had to cut them to fit. https://skeidarutto.kuvat.fi/kuvat/R...1.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...0.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...3.jpg?img=full Now the upper links have space between the shafts 8) https://skeidarutto.kuvat.fi/kuvat/R...6.jpg?img=full I had to place some spacer so that the bearing would not pop out. https://skeidarutto.kuvat.fi/kuvat/R...3.jpg?img=full --Another link to S.D.I Propeller safts that i used in this project--- If u missed the first one :lmao: Let's continue the story some other day. Family chores are calling :oops: |
Re: Rainbow Dash (Y-town 2.2S) It was time to go to the drawing board. It was time to make some rear weight hangers. So that this pony don't fly away! :twisted: Ordered some weight from Dravtech -Link to Dravtech weights-- Tungsten cylinders that have the same dimensions as the Pinewood Derby 0.5 oz slugs. https://skeidarutto.kuvat.fi/kuvat/R...0.jpg?img=full Few measurements and this is what i got out from my head... https://skeidarutto.kuvat.fi/kuvat/R...0.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...1.jpg?img=full On the right side is the first version that i tested fitness inside the wheel and so that the weights fit. On the left side is the "Final" piece. https://skeidarutto.kuvat.fi/kuvat/R...2.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...2.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...4.jpg?img=full Changed the rear shock/link mounts also to VP versions. https://skeidarutto.kuvat.fi/kuvat/R...3.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...0.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...4.jpg?img=full I like the look of them alot and they can take some beating. My Wraith have them also and zero issues. There was other versions that i wanted but nobody produced them at that time. :evil: Next i took out the gearbox and motor. Time to check that everything is ok with them. https://skeidarutto.kuvat.fi/kuvat/R...0.jpg?img=full Of course i had to place them on the scale :lmao: https://skeidarutto.kuvat.fi/kuvat/R...7.jpg?img=full I like the Hulksta engineerin gearbox. Zero issues with it. I think i have driven over 200 packs now with it. It works with XR10 gears that are not so easy to find anymore :evil: Go check his facebook page. He has some interesting stuff there "thumbsup" --Link to Hulksta Facebook page--- https://skeidarutto.kuvat.fi/kuvat/R...6.jpg?img=full And for the motor part. Team Brood Sisu motor. I don't know the turn count. I have to check from the shaft next winter when i do the maintenance to it. 35t i would guess :ror: If u don't know what Sisu means here is translate from Finnish to English "Determination regardless of cost" And this motor has it! :twisted: --Link to Team Broods Sisu motor page-- |
Re: Rainbow Dash (Y-town 2.2S) So it was time to start building the electronics for the summer. CC Micro Sidewinder https://skeidarutto.kuvat.fi/kuvat/R...8.jpg?img=full Of course i CC Bec 10a. Capacitor removed if u think it looks odd. https://skeidarutto.kuvat.fi/kuvat/R...9.jpg?img=full Little bit of soldering and we are good to go waterproofing the backet. https://skeidarutto.kuvat.fi/kuvat/R...4.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...8.jpg?img=full I'm using Rubbercomp to shield my electronics from water. Zero failures with this goo. Only thing i regret is that i didn't take transparent version. When this can is over next will be transparent. Easier to see what lights are blinking :) https://skeidarutto.kuvat.fi/kuvat/R...5.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...2.jpg?img=full This is how it looks after drying. https://skeidarutto.kuvat.fi/kuvat/R...0.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...3.jpg?img=full I have this expensive waterproof sanwa receiver... Of course i have to dissamble it so i can get the extra grams out of the weight :oops: https://skeidarutto.kuvat.fi/kuvat/R...3.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...0.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...5.jpg?img=full Ok to be honest i did it because of this. :ror: https://skeidarutto.kuvat.fi/kuvat/R...0.jpg?img=full Now it won't hit my body anymore in full squat. "thumbsup" I had to make new battery mount. Little bit of cardboard and aluminum sheet. https://skeidarutto.kuvat.fi/kuvat/R...9.jpg?img=full Here we have the finished product. I would liked to paint it. I didn't have time :x https://skeidarutto.kuvat.fi/kuvat/R...3.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...1.jpg?img=full It was time to tinker with the servo arm. It was little tricky to get it so low that it would turn the wheels enough. I managed to do that with little grinding and we are good to go. https://skeidarutto.kuvat.fi/kuvat/R...2.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...3.jpg?img=full Here is picture from the upper link setup that i'm running. Front https://skeidarutto.kuvat.fi/kuvat/R...9.jpg?img=full Rear https://skeidarutto.kuvat.fi/kuvat/R...4.jpg?img=full I think the car is ready for the first run :twisted: https://skeidarutto.kuvat.fi/kuvat/R...8.jpg?img=full RTR weight. 4,045lb (64,73Oz) https://skeidarutto.kuvat.fi/kuvat/R...4.jpg?img=full Short test in my home course... S*itty course if u ask me. :lmao: I throw old bricks on the ground when i was renovating my house. https://skeidarutto.kuvat.fi/kuvat/R...5.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...6.jpg?img=full https://skeidarutto.kuvat.fi/kuvat/R...4.jpg?img=full Everything worked so it was time to go first time to go first training session of the year... |
All times are GMT -6. The time now is 03:07 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com