Adding a sporty to the heard The time has finally come for me to build a sporty. Starting out with some Creation Fab AX10/XR10 hybrid axle housings. I will be pairing these axles with a suckerpunch chassis. Hitec 7950th Castle Mamba Max Pro HH Crawlmaster Pro 16t Now for the pictures. Just getting started. http://uploads.tapatalk-cdn.com/2016...272925eba7.jpg Inside the rear axle http://uploads.tapatalk-cdn.com/2016...193a809572.jpg Rear axle finished http://uploads.tapatalk-cdn.com/2016...bda9896ba4.jpg |
Re: Adding a sporty to the heard Nice start. You will like those creation fab tubes. The fit and finish on them is top notch."thumbsup" |
Re: Adding a sporty to the heard Thanks Stuck. Everything seems to be going together pretty well. Front axle nearing completion. http://uploads.tapatalk-cdn.com/2016...6d501f46d6.jpg |
Re: Adding a sporty to the heard What's wrong with your thumb!? |
Re: Adding a sporty to the heard Quote:
|
Re: Adding a sporty to the heard sould'nt this thread be in the ax10 sectiom...??? 2nd gen has AR60 axles......;-)"thumbsup" |
Re: Adding a sporty to the heard Quote:
|
Re: Adding a sporty to the heard Quote:
Nice start for sure! Just curious about the esc(mmp) I will assume its a cc micro or a mamba micro x? |
Re: Adding a sporty to the heard Quote:
|
Re: Adding a sporty to the heard Looks like it's in the right section to me. |
Re: Adding a sporty to the heard Quote:
|
Re: Adding a sporty to the heard As I am sitting here spinning the front axle compared to the back axle, it seems like the front takes quite a bit more force to get the Universals to rotate. Anyone with these axles know why that might be and what to do to fix it? |
Re: Adding a sporty to the heard (Cause I moved it, ya thumb weirdo) Loosen up some screws and see if it spins better. |
Re: Adding a sporty to the heard Quote:
I had similar problem .... found if the 4 screws around the gears are too tight it warps the case and binds the ring and pinion. Other thing was 6mm screws through the case and into the tubes hit the axles in some spots. That was my problem. Backed them out a little and things were better. Easy enough to pull the axles out and see if theres any silver areas from the screws rubbing them. |
Re: Adding a sporty to the heard Quote:
|
Re: Adding a sporty to the heard Quote:
|
Re: Adding a sporty to the heard any updates on this? what body do you plan running? |
Re: Adding a sporty to the heard No updates yet. I've been busy working 11 and 12 hour days the past couple weeks. I'm a teacher and I have spring break this upcoming week so I'm going to work on it a few days hopefully. I plan to run an xciter body that I'm going to try painting myself. We will see how that goes. Also picked up a br mini esc and a hh 16t Crawlmaster motor. Waiting on those things to complete the electronics. Updates this week as long as I have some time...also helping my fiancé move so we will see how much time I actually get. |
Re: Adding a sporty to the heard Get a castle creations bec 10amp if you haven't already |
Re: Adding a sporty to the heard Quote:
Already done. ;) Didn't put it in with the other electronics because I thought these were sort of a given by now. |
All times are GMT -6. The time now is 02:54 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com