Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Heritage Crawlers > Axial AX-10 Scorpion


Thread: witch driveshafts fit?

LinkBack Thread Tools Display Modes
Old 08-13-2007, 10:00 AM   #1
Join Date: Aug 2007
Location: clayton
Posts: 20
Default witch driveshafts fit?

do stampede driveshafts fit axial trans and axel outputs? i would like to build a scale crawler using axial axels and trans but can't find the driveshafts. so if stampede driveshafts fit, i'd use them.
MasDog is offline   Reply With Quote
Sponsored Links
Old 12-15-2007, 09:46 AM   #2
Rock Stacker
Join Date: Jun 2007
Location: sacramento
Posts: 51
Default ?

yes stampede driveline will work. that is what im using right now.
neuera 916 is offline   Reply With Quote
Old 12-15-2007, 10:25 AM   #3
RCC Addict
Join Date: Nov 2007
Location: BV
Posts: 1,171

The stampede yokes work on the axial axles and trans, but by all accounts the pins on the axial yokes are too short for the pede shafts. also, the pede shafts are kinda short, so you'll have to cut and glue them to work. The steel pede yokes are cheaper than the steel axial yokes anyways.
chrisjlittle is offline   Reply With Quote
Old 12-15-2007, 12:56 PM   #4
Rock Crawler
Join Date: May 2007
Location: lacey
Posts: 833

I'm currently running the stampede shafts on my ax, since I busted both front and rear and my shop didn't have the axial shafts. Just mounted them right on and no problems. they are a little bit shorter than the axial shafts, they only interlock about a half inch, but that seems to be plenty considering i've had my truck in full bind with these shafts an no poping or breaking.
mysharona is offline   Reply With Quote
Old 12-15-2007, 04:27 PM   #5
Quarry Creeper
Join Date: Sep 2007
Location: Carlisle
Posts: 435

traxxas long shafts i here work best im running the nitro rustler shafts on mine
Dickie691986 is offline   Reply With Quote
Old 12-15-2007, 05:44 PM   #6
Join Date: Dec 2007
Location: Pilipinas
Posts: 28

Originally Posted by Dickie691986 View Post
traxxas long shafts i here work best im running the nitro rustler shafts on mine
Bro, are you talking about this?

Does this traxxas shafts solves the "yokes popping-off" on the stock AX10 Driveshaft?
Is it thin enough to clear the AX-10 Spur-gear?

Last edited by Vroomvroom; 12-15-2007 at 05:56 PM.
Vroomvroom is offline   Reply With Quote
Old 12-15-2007, 06:30 PM   #7
Rock Crawler
Join Date: Dec 2005
Location: North Vancouver
Posts: 524

Those look like them. I haven't had any issues..but I never had any issues with my stock ones either...I had to cut up the front shaft to make a longer on for the rear because I streached mine. Got the rustlers to replace and they are a direct fit as you can see, they are a bit shorter but still fit.

miller is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 07:32 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com