08-13-2007, 10:00 AM | #1 |
Newbie Join Date: Aug 2007 Location: clayton
Posts: 20
| witch driveshafts fit?
do stampede driveshafts fit axial trans and axel outputs? i would like to build a scale crawler using axial axels and trans but can't find the driveshafts. so if stampede driveshafts fit, i'd use them. |
Sponsored Links | |
12-15-2007, 09:46 AM | #2 |
Rock Stacker Join Date: Jun 2007 Location: sacramento
Posts: 51
| ?
yes stampede driveline will work. that is what im using right now.
|
12-15-2007, 10:25 AM | #3 |
RCC Addict Join Date: Nov 2007 Location: BV
Posts: 1,170
|
The stampede yokes work on the axial axles and trans, but by all accounts the pins on the axial yokes are too short for the pede shafts. also, the pede shafts are kinda short, so you'll have to cut and glue them to work. The steel pede yokes are cheaper than the steel axial yokes anyways.
|
12-15-2007, 12:56 PM | #4 |
Rock Crawler Join Date: May 2007 Location: lacey
Posts: 833
|
I'm currently running the stampede shafts on my ax, since I busted both front and rear and my shop didn't have the axial shafts. Just mounted them right on and no problems. they are a little bit shorter than the axial shafts, they only interlock about a half inch, but that seems to be plenty considering i've had my truck in full bind with these shafts an no poping or breaking.
|
12-15-2007, 04:27 PM | #5 |
Quarry Creeper Join Date: Sep 2007 Location: Carlisle
Posts: 435
|
traxxas long shafts i here work best im running the nitro rustler shafts on mine
|
12-15-2007, 05:44 PM | #6 | |
Newbie Join Date: Dec 2007 Location: Pilipinas
Posts: 28
| Quote:
http://www3.towerhobbies.com/cgi-bin...?&I=LXSP55&P=M Does this traxxas shafts solves the "yokes popping-off" on the stock AX10 Driveshaft? Is it thin enough to clear the AX-10 Spur-gear? Last edited by Vroomvroom; 12-15-2007 at 05:56 PM. | |
12-15-2007, 06:30 PM | #7 |
Rock Crawler Join Date: Dec 2005 Location: North Vancouver
Posts: 524
|
Those look like them. I haven't had any issues..but I never had any issues with my stock ones either...I had to cut up the front shaft to make a longer on for the rear because I streached mine. Got the rustlers to replace and they are a direct fit as you can see, they are a bit shorter but still fit. |
Thread Tools | |
Display Modes | |
| |