12-30-2007, 10:24 AM | #181 |
Quarry Creeper Join Date: Nov 2007 Location: Oregon
Posts: 302
|
Here are some photos of my Ax10 The build includes: Axiom 55turn Rooster crawler ESC Hitec 985mg 4200mah sub C's Axial Bentlinks Axial Blue springs/rear Axial green springs/front Axial Low CG battery plate 14/93 gearing Last edited by Mr. Burpsalot; 12-30-2007 at 10:39 AM. |
Sponsored Links | |
12-31-2007, 12:09 PM | #182 |
Pebble Pounder Join Date: Aug 2007 Location: Anaheim/Gardena, CA
Posts: 179
|
Cant wait for my Edge Chassis to come in.. Tis' a shame though, I'll miss this set up. |
12-31-2007, 08:12 PM | #183 |
Newbie Join Date: Jul 2007 Location: Peekskill, NY
Posts: 23
|
Mine's still mighty stock, and crawls well - great power! - but the springs are way too stiff for me, and I definitely need more steering clearance. I plan on going stage 2, and after that, who knows? In the pics, you'll notice that the wiring is sloppy and she's hardly been used at all. I wanted to make sure I was happy with the electronics placement before locking all down, and figured I should take some pics before the paint's all scraped off. And man, those are some smelly tires! All in all, pretty competent rig Quark 33 Crawlmaster Sport 5645MG 8-cell 1500 mAh Last edited by 2old4rc; 12-31-2007 at 08:19 PM. |
01-01-2008, 05:54 PM | #184 |
Newbie Join Date: Dec 2007 Location: Detroit
Posts: 8
| Fox Custom AX-10 55t Integy motor Stage 2 with bent links "pinched" Betty body 2 holes in each wheel with star cut foams Here are some pics: |
01-01-2008, 10:19 PM | #185 |
Quarry Creeper Join Date: Feb 2006 Location: Happy Valley
Posts: 262
| Rusty Axial
Here is my brothers Rusted out truck |
01-02-2008, 05:20 PM | #186 |
Newbie Join Date: Dec 2007 Location: York
Posts: 16
|
My brand new AX-10 and one with all my RC's |
01-02-2008, 06:43 PM | #187 |
Rock Stacker Join Date: Nov 2007 Location: Commerce Twp.
Posts: 60
| my ax-10 gopher Last edited by caddyshack; 01-06-2008 at 07:41 PM. |
01-02-2008, 10:01 PM | #188 |
Quarry Creeper Join Date: Dec 2007 Location: H.B.
Posts: 432
|
New body for mine. |
01-04-2008, 05:37 PM | #189 |
Pebble Pounder Join Date: Aug 2007 Location: Anaheim/Gardena, CA
Posts: 179
|
Got My Edge Chassis Today, and Assembled it. Once I make my body panels, I'll mount the electronics. |
01-04-2008, 07:19 PM | #190 |
Newbie Join Date: Dec 2007 Location: sacramento
Posts: 13
| my ax 10
my ax 10 bent links and home made mods.. with 2.2 rock stompers.. these things are pretty tall. but nice |
01-04-2008, 10:00 PM | #191 |
Pebble Pounder Join Date: Dec 2007 Location: CA
Posts: 191
| my ax-10
First shot of my ax-10 Last edited by flybird; 06-13-2008 at 03:44 AM. |
01-05-2008, 08:31 AM | #192 |
Rock Stacker Join Date: Nov 2005 Location: Quad Cities
Posts: 65
| My first Crawler
Here are a few pics of my new crawler. Last edited by Wild Willys; 02-24-2008 at 08:13 AM. |
01-05-2008, 06:47 PM | #193 |
Quarry Creeper Join Date: Sep 2007 Location: Middle of the USA
Posts: 321
| New Edge
Axial truck TCS Edge TUber Futaba 9351 and 9156 servo Dynamite ESC Bent links custom front links Futaba 6EX Stick radio Integy 55 T Novak lipo protection Common sense r/c lipo! Custom front links 52mm long and 32mm short, offers a whole lot better clearance! |
01-06-2008, 04:14 PM | #194 |
Newbie Join Date: Jan 2008 Location: Roseville
Posts: 11
| new bug body
This is in my back yard Last edited by RockenRoller; 01-06-2008 at 04:46 PM. |
01-06-2008, 04:23 PM | #195 |
Rock Crawler Join Date: Jun 2007 Location: Flint/Mt. Morris
Posts: 570
|
New near stock Scorpion, fully RTR complete with bad paint |
01-07-2008, 10:19 AM | #196 |
Newbie Join Date: Jan 2008 Location: Billings
Posts: 1
| |
01-08-2008, 10:30 PM | #197 |
Rock Crawler Join Date: Dec 2005 Location: North Vancouver
Posts: 524
|
Guess I need to update mine |
01-10-2008, 12:02 AM | #198 |
Newbie Join Date: Jan 2008 Location: Destin
Posts: 24
|
Novak Rooster Crawler Novak 55T 2xJR st126mg servos Home made rear linkage 1700 nicad star cut foams i ripped a huge hole in cab, so i had to patch it with some aluminum sheet metal 20 pallets and 5 truck loads of rock turned out to be a pretty challenging course Last edited by Kevin713; 01-10-2008 at 12:21 AM. |
01-10-2008, 12:06 AM | #199 |
Newbie Join Date: Dec 2007 Location: simi valley
Posts: 1
| My Edge |
01-10-2008, 01:09 PM | #200 |
Newbie Join Date: Oct 2007 Location: Guam, USA
Posts: 15
|
Rooster Crawler 55t lathe Hitec 5645 Rock Claws |
LinkBacks (?)
LinkBack to this Thread: http://www.rccrawler.com/forum/axial-ax-10-scorpion/82403-axial-ax-10-picture-archive-no-talking.html | ||||
Posted By | For | Type | Date | |
RE: Anyone Have a Mini MGT? | This thread | Refback | 10-05-2011 08:59 AM |
Axial AX-10 Picture archive - No talking - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1.9 scale rig picture archive - No talking | 123abc | 1.9 Scale Rigs | 2041 | 03-26-2024 03:44 AM |
Redcat Picture Archive - No talking | EeePee | Redcat Crawlers | 404 | 02-08-2024 06:23 PM |
1.5 scale picture archive - No talking | 1BadJeepBruiser | 1.5 Scale Rigs | 358 | 07-04-2023 03:22 PM |
SCX10 Picture Archive - No talking | BENDER | Axial SCX-10 | 3332 | 06-04-2023 05:40 PM |
Wraith Picture Archive - No talking | Harley | Axial Wraith | 1586 | 03-22-2023 11:32 AM |
Thread Tools | |
Display Modes | |
| |