No1 : Senior Latya
Hungary LoxCost Cup Champion !


http://kepfeltoltes.hu/thumb/090811/...toltes.hu_.jpg
http://kepfeltoltes.hu/view/090811/A...toltes.hu_.jpg
http://kepfeltoltes.hu/thumb/090811/...toltes.hu_.jpg
http://kepfeltoltes.hu/view/090811/O...toltes.hu_.jpg
http://kepfeltoltes.hu/thumb/090811/...toltes.hu_.jpg
http://kepfeltoltes.hu/view/090811/A...toltes.hu_.jpg
http://kepfeltoltes.hu/thumb/090811/...toltes.hu_.jpg
http://kepfeltoltes.hu/view/090811/A...toltes.hu_.jpg

My new crawler setup. Got 21.5 turn Tekin brushless on the way.

9100T
CKRC BTA
CKRC C's
CKRC high clearance knucks
Axial front CVD's
MIP Centers
Fast Lane Machine Chassis, links and lockers (lockers not installed yet)
Axial 43/13 F/R (not installed yet)
DNA DIG w/ steel internals - dig not hooked up ATM - waiting on 225mg
Integy 55T with novak rooster
Team Losi crawler 7.4 lipo 3300 mah or 11.1 1320 TP
Spektrum
Pro-line Chisels + 2 stage foams (foams coming with the BL)
Axial rear lockouts
DNA rear plate 4 link
CKRC servo plate, 3 link front



http://i72.photobucket.com/albums/i1...1/IMG_6027.jpg

http://i72.photobucket.com/albums/i1...1/IMG_6030.jpg

http://i72.photobucket.com/albums/i1...1/IMG_6032.jpg

http://i72.photobucket.com/albums/i1...1/IMG_6036.jpg

axial
55t motor
now have 7.4v lipo
http://i28.tinypic.com/2qxykq0.jpg

My Speckled AX-10
 

Artc & rtc
 

http://i134.photobucket.com/albums/q...1/FILE0047.jpg

http://i134.photobucket.com/albums/q...FILE0062-1.jpg

http://i134.photobucket.com/albums/q...1/FILE0117.jpg

http://i134.photobucket.com/albums/q...1/FILE0043.jpg

oh yeah and an edge:mrgreen:

Here is my Axial ax10 "GREEN SCORPION"8)

Axial ax10 Kit

45t Lathe
Panther Tires
Castle Sidewinder "thumbsup"
TowerPro MG995 Servo
Kyosho Perfex Radios
3Racing Green Knuckle
3Racing Swing Shaft
Added castor angle C-Hubs
3s 800mAh Lipo
Hot Racing 30 degree links


http://img36.imageshack.us/img36/536/sdc10716s.jpg


http://img200.imageshack.us/img200/759/sdc10722w.jpg


http://img132.imageshack.us/img132/74/sdc10723w.jpg

My 1st DIY chassis.
 

http://i594.photobucket.com/albums/t..._0001Small.jpg


DIY chassis - grimjaw :mrgreen:

This is was a year ago
Attachment 109265

Finally got all my parts installed, oh and I added 10,000 hp with a wing!


http://i72.photobucket.com/albums/i1...1/IMG00018.jpg

http://i591.photobucket.com/albums/s...s/DSCN2328.jpg

http://i591.photobucket.com/albums/s...s/DSCN2331.jpg

DIY chassis.."Grimjaw"
 

http://i594.photobucket.com/albums/t...mjaw2Small.jpg
http://i594.photobucket.com/albums/t...mjaw3Small.jpg

Here is mine:

http://i537.photobucket.com/albums/f...k/SNC11921.jpg
http://i537.photobucket.com/albums/f...k/SNC11922.jpg
http://i537.photobucket.com/albums/f...k/SNC11923.jpg

my new SWX rig
 

Here is my SWX rig!

Used:

Novak rooster +55t
Proline Hammer G8
SWX chassis
custom 4 link plate hinten
overdrive gear vorne
Vanquish dig (orderd but not arrived yet)
Vanquish steering knuckles (orderd but not arrived yet)
MIP cvds (orderd but not arrived yet)
xc1 trimmed body
ds1015 steering servo
dx3r
losi 4" threated shocks

http://img30.imageshack.us/img30/7051/dsc00464opd.jpg

http://img35.imageshack.us/img35/3751/dsc00482q.jpg

-LRP A.I. super reverse
-CC BEC
-15T HPI Fireball
-75T spur/26T pinion
-7 cell Nimh
-Tmaxx shocks with white losi springs, black spring in the right rear. Didn't have time to set up a sway bar so I am running internal springs in the rear to control the body some.
-Flat black paint job with LED Lights
-Homemade steel lower links and aluminum uppers. ( I kept pretzeling aluminum lowers)
-Flipped battery tray

http://photos-d.ak.fbcdn.net/hphotos..._2688550_n.jpg

Chevy C-10
 

http://www.rccrawler.com/forum/pictu...pictureid=5292
Can't go wrong with a Chevy!"thumbsup"

ax10
 

I have got the bug all based on ax10

http://img.photobucket.com/albums/v8...5/IMG_2543.jpg
work in progress

http://img.photobucket.com/albums/v8...5/IMG_2548.jpg
the test pile

here is my artr with proline tuber