RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial AX-10 Scorpion (http://www.rccrawler.com/forum/axial-ax-10-scorpion/)
-   -   Axial AX-10 Picture archive - No talking (http://www.rccrawler.com/forum/axial-ax-10-scorpion/82403-axial-ax-10-picture-archive-no-talking.html)

JLF 11-27-2009 12:14 PM

My 'SCORPION KING' Project!
 
http://i6.photobucket.com/albums/y24...i/100_2654.jpg

http://i6.photobucket.com/albums/y24...i/100_4072.jpg

My 'SCORPION KING' project. I love Clodbusters and Scorpions, so I decided to mesh both worlds and make a modern day Clod. Its a work in progress, and is constantly evolving. Bigger, more Alloy, and next, Huge Brushless Power!

AgentXXX 11-27-2009 11:32 PM

Well here is my AX10. Started as a kit and now I have almost a complete truck in left over parts after upgrades.
DNA Slingshot
DNA 2.2 Beadlocks
DNA Dig
Losi 4" Shocks
CC BEC 6.2v
Junfac SS Driveshafts
HR Straight axle kit
Tekin FXR 35T
HB Rovers
Nova's ark dual stage foam

http://i390.photobucket.com/albums/o.../truck1006.jpg
http://i390.photobucket.com/albums/o.../truck1003.jpg
http://i390.photobucket.com/albums/o.../truck1012.jpg
http://i390.photobucket.com/albums/o.../truck1013.jpg
http://i390.photobucket.com/albums/o.../truck1015.jpg
http://i390.photobucket.com/albums/o.../truck1017.jpg
http://i390.photobucket.com/albums/o.../truck1018.jpg
http://i390.photobucket.com/albums/o.../truck1019.jpg
http://i390.photobucket.com/albums/o.../truck1023.jpg
http://i390.photobucket.com/albums/o.../truck1002.jpg

Bill Br 11-29-2009 07:04 AM

Brazilian scorpion
 
Hello everybody...
My name is Bill. I live in Curitiba, Brasil and this is my AX10.
First i made a body with aluminum bars and plastic parts...
http://i401.photobucket.com/albums/p...n/P1010125.jpg
http://i401.photobucket.com/albums/p...n/P1010126.jpg
http://i401.photobucket.com/albums/p...n/P1010138.jpg

After i made other body with aluminum only, and fixed batteryes in the side of chassis for more stability...
http://i401.photobucket.com/albums/p...n/PB010056.jpg
http://i401.photobucket.com/albums/p...n/PB010064.jpg
http://i401.photobucket.com/albums/p...n/PB010084.jpg
http://i401.photobucket.com/albums/p...n/PB010093.jpg
http://i401.photobucket.com/albums/p...n/PB010097.jpg

mr.freeze 12-02-2009 06:37 PM

Here's mine in it's cutant state. How long it will stay this, who knows.

Started with ax10 kit
changed out the chassis for the Bender swx kit
using inverted Max shocks all the way around
panther leopards
novak rooster crawler esc and 55t motor
futaba 3pm 2.4gig
hobbico cs 170tg
hot racing dig
great planes 1600mah lipo
JConcepts Stage Killah
pic of before swx

http://i254.photobucket.com/albums/h...s/102_2873.jpg

as it runs now

http://i254.photobucket.com/albums/h...s/102_3013.jpg

http://i254.photobucket.com/albums/h...s/102_2984.jpg

http://i254.photobucket.com/albums/h...s/102_3048.jpg

http://i254.photobucket.com/albums/h...s/102_3047.jpg

RIG_RIDER 12-05-2009 06:52 PM

My crawler. I don't comp, yet. I'm getting the bashing part out of my system first, and learning to tune the RIG and drive better.

AX-10 4ws no dig
Alu C's & knuckles (front) overdrive R&P
stock (rear) HD R&P
FX-R, 3s 1500mah, Titan 21T (87t s 12t p)
ccbec @ 7.2V
JR ds8611a (front) CPE-SER4: CYS (rear)
4 link front & rear
30* links
stock shocks semi-droop (60wt f & 80wt r)
TQ2.4 4Ch


http://img697.imageshack.us/img697/2418/0801091657.jpg
http://img11.imageshack.us/img11/3482/1127092055.jpg
http://img262.imageshack.us/img262/7777/1127092050.jpg
http://img262.imageshack.us/img262/8586/1121092006.jpg

mik3sparks 12-07-2009 02:35 PM

sorry

racerfred 12-08-2009 12:36 PM

My crawler
 
It is amazing to see all of the different variations of one crawler model.

Here is my basher rig that is nearly comp legal (illegal body). I just finished the rig a few days ago. I wanted a different body that wasn't a bug. Next body will be Proline's 72' chevy C 10. The drive shaft broke yesturday, (first day out after rebuild) will be replacing it with T maxx shafts.

SPECS:
Servo: hitec 7955tg
Servo mount: Home made out of AL
Battery: Hand built 2/3a 1500 nimh 8 cells with Sermos
Tires: Panther Cougars with axial stock foams
BTA by Jet boat
Wheels: stock with some weight in the front only (for now)
Knuckles: Rd logics
Cvds: 3Racing
Shocks: HR 100mm Air shock
Links: Home made plastic with allthread and revo ends
Chassis: TK Twister small T bone
Body mounts: home made
BEC: Castle Creations
Radio: Ko Propo EX-5UR
Motor: Custom hand wound 55T Double
Stock gearing for now
Esc: Castle Creations Mamba Max with 12awg wiring
Lockouts: Home made
Body: An old HPI/Tamiya Mini Cooper (old school)

Topless
http://i559.photobucket.com/albums/s...d/IMG_0277.jpg

Flexin
http://i559.photobucket.com/albums/s...d/IMG_0293.jpg

Drop off
http://i559.photobucket.com/albums/s...d/IMG_0290.jpg

ChevyAX-10 12-08-2009 07:23 PM

My rig
 
THIS IS MY AXAIL AX-10. I AM USING THE T-MAXX TIE RODS FOR MY REAR 4-LINK AND FRONT LOWER LINKS. IT ALSO HAS PANTHERS MOUNTED ON AXIAL ROCKSTAR BEADLOCK WHEELS WITH GREEN LOCK RINGS. FOR BATTERY POWER I AM USING 1500MAH 7.2 VOLT HUMP PACKS WHICH ARE MOUNTED ON THE FRONT AXLE.

I CRAWL AT THE CONCORD, CA HOBBYTOWN JUST ABOUT EVERY SATURDAY. IF I'M NOT THERE I'M USALLY UP AT MY 40+ ACRE PROPERTY MAKING CRAWL AREAS.

CRAWL ON!!!"thumbsup"

http://i160.photobucket.com/albums/t...4/IMG_3144.jpghttp://i160.photobucket.com/albums/t...4/IMG_3146.jpghttp://i160.photobucket.com/albums/t...4/IMG_3147.jpghttp://i160.photobucket.com/albums/t...4/IMG_3140.jpghttp://i160.photobucket.com/albums/t...IMG_3115-1.jpg

flaco 12-08-2009 10:06 PM

Just picked up my buddies ax10. So far Ive already put a 2s goat esc and a modified jeep body. Other than that its got bent links in the rear, 55t integy motor, 1500mah split battery pack on the front axle, rc4wd rock crusher tires on axial beadlocks, and a hitec hs645mg servo. Soon to come is a droop only setup and brushless and lipo.

http://i23.photobucket.com/albums/b4...c/DSC02755.jpg

http://i23.photobucket.com/albums/b4...c/DSC02759.jpg

http://i23.photobucket.com/albums/b4...c/DSC02760.jpg

http://i23.photobucket.com/albums/b4...c/DSC02764.jpg

http://i23.photobucket.com/albums/b4...c/DSC02763.jpg

WVhillbilly 12-10-2009 04:46 AM

Right out of the box, still has that new crawler smell.
http://www.zukikrawlers.com/albums/a...1292.sized.jpg

Krakker 12-11-2009 10:21 AM

4 Attachment(s)
Some picks of my C-10 covered Bastard jr. I shortened up the wheel base with some custom links from R2j, and a double tri skid. now sits just over 11"s. I notched the C-10's rear bed and window to fit it over the Bastard jr tube chassis.

Bmarsh 12-14-2009 03:17 PM

My Axial:

Underground crawlers F-4 chassis
Custom links
Custom Front/Rear 4-links
Tekin FXR w/ 55T
Hitec 645
HB Rovers(white) on axial rims

http://i445.photobucket.com/albums/q...9_12140013.jpg
http://i445.photobucket.com/albums/q...9_12140009.jpg
http://i445.photobucket.com/albums/q...8/Complete.jpg
http://i445.photobucket.com/albums/q...ompleteTop.jpg

cklanish88mj 12-14-2009 03:34 PM

my ax 10
 
http://www.facebook.com/photo.php?pi...&id=1077604440
this is my ax 10 it has a ckrc bug body 55t motor and rooster esc with a futaba pm3 radio

cklanish88mj 12-14-2009 03:50 PM

my ax 10
 
http://i976.photobucket.com/albums/a...w_York2009.jpg

DonsATV 12-14-2009 06:25 PM

MFM Black Widow chassis
Mayhem Spiders w/ Mayhem Custom rings
HB Rovers (white) w/ stock foams
J Concepts Rock Steady body
HR dig w/ Airtronics 94102 servo
Axial axles
JR DS8711
Integy 45t lathe motor
Delrin lower links F/R
Delrin upper 4 linked rear
Stock upper 3 link front
Mystery shocks/ full droop

http://i510.photobucket.com/albums/s...0/IMG00031.jpg
http://i510.photobucket.com/albums/s...0/IMG00033.jpg
http://i510.photobucket.com/albums/s...0/IMG00034.jpg

:mrgreen:

dranger962000 12-22-2009 11:16 PM

http://i608.photobucket.com/albums/t...ker2/rc020.jpg

maxpearl 12-30-2009 12:40 PM

my crawler
 
this is my crawler !
ax10 whit badstard jr chassis
mamba max esc
outruner brushless
proline tire whit junfac wheel
mg946r servo
2x 1400mah
http://i131.photobucket.com/albums/p...1car/004-8.jpg
http://i131.photobucket.com/albums/p...1car/001-7.jpghttp://i131.photobucket.com/albums/p...1car/002-8.jpg
http://i131.photobucket.com/albums/p...1car/003-6.jpg

CnC Kid 12-30-2009 05:25 PM

Complete one-off build
 
100% Designed, built, and machined by me, utilizing Solidworks and Mastercam.

Novak Goat Brushless system
2s lipo
HPI Rock Grabbers
Spektrum DX6i
One-off chassis, servo/battery mounts, electronics tray, beadlock rings, etc programmed and machined by me.
http://i765.photobucket.com/albums/x...7/crawler1.jpg


http://i765.photobucket.com/albums/x...7/crawler3.jpg

http://i765.photobucket.com/albums/x.../crawlersw.jpg

http://i765.photobucket.com/albums/x...7/crawler2.jpg

morguester 12-31-2009 01:06 AM

AX10 with Losi springs (2.3 rate front; 2.6 rate rear). Novak Rooster Crawler/55t combo, Hitec 645MG servo. Custom front steering linkage for added clearance, hi-clearance links rear, rear 4link setup, stock tires.
http://photos-d.ak.fbcdn.net/hphotos..._6173725_n.jpg
http://photos-f.ak.fbcdn.net/hphotos..._3326532_n.jpg
http://photos-h.ak.fbcdn.net/hphotos..._5815205_n.jpg

And a short running vid 4 fun!
http://www.youtube.com/watch?v=nCMccfDoeGA


All times are GMT -6. The time now is 04:05 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com