Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Heritage Crawlers > Axial AX-10 Scorpion
Loading

Notices

Thread: Axial AX-10 Picture archive - No talking

Reply
 
LinkBack Thread Tools Display Modes
Old 07-03-2010, 02:43 AM   #1121
Rock Stacker
 
Join Date: May 2010
Location: -34.040361,151.214831
Posts: 52
Default



my latest
conrodss is offline   Reply With Quote
Sponsored Links
Old 07-04-2010, 10:17 AM   #1122
RCC Addict
 
Join Date: May 2010
Location: So. Charleston. Wv
Posts: 1,221
Default

My ax10

Added:
Axial aluminum link kit. (orange)
Axial 55t motor w/ 20t pinion
Traxxas Rod ends
Axial vert mounts
proline bronco body

On the list.

Hitec 645mg (Ordered)
Traxxas Rodends (3 link)
Axial 3 link connector ends
Axial drive shaft ring
Panther Cougar 2.2 w/ soft foams
Axial frame extentions

Heres the pics as of right now. enjoy!!

Out of the box RTR

NOW:
kinda going for the scale look......

PhantomRS10 is offline   Reply With Quote
Old 07-04-2010, 07:26 PM   #1123
Quarry Creeper
 
Join Date: Jun 2010
Location: 801 El Capital
Posts: 434
Default My used to be rtr.

Purchased as a rtr. Now is a comp rig at least in my oppinion
RTR
Green color pack added
Green front bent links also added
Red upper links added to break it up some
Custom lexan upper link plates for electronics
STRC tranny mount plate with links mounted internally
Losi comp shocks
Custom 4-link plates front and rear
battery mount on either side of steering servo
CKRC wiggle steering servo
Castle Creations Sidewinder ESC with CC BEC
Novak 55 brushed motor
Panther tires front and rear weighted
TQ3 link 2.4ghz system
Losi comp body for now

Dig in near future.

Oh and my bro. in laws redcat.


jhghah is offline   Reply With Quote
Old 07-07-2010, 08:22 AM   #1124
I wanna be Dave
 
Join Date: Dec 2009
Location: Lady Lake, Fl
Posts: 2,128
Default

Heres mine, FF-4 all the way!! It has evolved a little-stock artr to slingshot to ff-4 to the present Fastback!!
Attached Images
  

Last edited by billj; 08-30-2010 at 12:19 PM.
billj is offline   Reply With Quote
Old 07-08-2010, 08:08 PM   #1125
I joined the Band!
 
Join Date: Aug 2009
Location: Maryville, Tn
Posts: 1,198
Default updated pics of the tuber




TNCrawler is offline   Reply With Quote
Old 07-22-2010, 10:58 AM   #1126
Newbie
 
Join Date: Jul 2010
Location: Estonia
Posts: 23
Default




Last edited by Estonia boy; 07-29-2010 at 02:02 PM.
Estonia boy is offline   Reply With Quote
Old 07-22-2010, 08:56 PM   #1127
Pebble Pounder
 
Join Date: Jun 2008
Location: PISCATAWAY
Posts: 128
Default

insision chassis
55t novac motor
hurtz dig
4pk radio



T1DAVE is offline   Reply With Quote
Old 07-24-2010, 11:34 PM   #1128
RCC Addict
 
Join Date: May 2010
Location: So. Charleston. Wv
Posts: 1,221
Default

group shot after mods an some crawlin

Left to right

Phantomrs10 (me), Axialchevy an onebdgti

PhantomRS10 is offline   Reply With Quote
Old 07-28-2010, 07:01 PM   #1129
Rock Stacker
 
Join Date: Jan 2010
Location: warrensburg
Posts: 63
Default


front setup


rear links


just alittle modification for my dig lol


another rear pic


the whole hog


the whole bottom view
blazin396 is offline   Reply With Quote
Old 07-29-2010, 08:12 AM   #1130
Rock Stacker
 
Join Date: Oct 2009
Location: Portugal
Posts: 52
Default My AX-10 Vanquish

Hello

My AX-10 Vanquish

Chassis Axial Pro VP Incision
VP Hurtz Shifter 3 Position Dig for Axial AX-10
Vanquish Axial Rear 4 Link plate
VP Axial Front Battery/Servo 4 Link Plate
VP Shock Mount Razors
VP Axial Rear Axle Lockouts
VP Axial High Steering Knuckles Zero Acker
VP Axial AX-10 Alum Trans Housing
Radio: DX3R
ESC: Mamba Max Pro
Engine: 21, T Novak Brushless
BEC: Castle 10AMP
Lipo: 3s 1500mAh 20c
Servo: Hitec HS-7950TH
Transmission: MIP
Axles: Golden Horizon
Tyres: HB Ex-Rover
Rims: VP Procomp DH 2.2
Bumpers: Losi
Measure Wheelbase: 320mm
Overall width: 240mm
Clearance of difference: Blocked
Center Chassis clearance: 80mm
Overall height: 180mm
Weight: 2900Kg
Body: Beetle













Regards

Freitas

Last edited by Freitas1979; 07-29-2010 at 08:15 AM.
Freitas1979 is offline   Reply With Quote
Old 08-02-2010, 04:40 AM   #1131
Quarry Creeper
 
Join Date: Jan 2009
Location: WA state
Posts: 218
Default

F-150 axial
cut boggers
motor 55t/19t
traxxas 2075 servo



Jeep axial frame
36/14 front gear set
43/13 rear gear set
motor 35t/14t, soon to be 55t/21t
Novak orange esc
traxxas 2076 servo
2.2 roklox



...

I'm in the process of slowly rebuilding my AX-10.

I'm going with a Van body and thinking about getting the SCX10 frame set.



The old F-150 body I had. I wish I would've taken better care of it and went down to 1.9s instead of trying to figure out a way to fit 40 series tires haha


Last edited by THX_138; 04-29-2018 at 11:58 PM.
xtreme4x2 is offline   Reply With Quote
Old 08-04-2010, 09:00 AM   #1132
Newbie
 
Join Date: Jul 2010
Location: High Point
Posts: 4
Default another ax10 with proline tube body

Axial ax-10
Proline tuber body
Novak 55T motor (swapped sides)
Rooster Crawler ESC
Panthers on proline wheels, memory foams
Hitec rs 5645mg servo
Hitec agressor tx
3300 and 4400 NiCd batteries

mods...
extended upper links(50>70), redrilled chasis
mip racing steel HD driveshafts
inboarded lower links
slipper clutch
booty fabbed output shaft
oh and rock lights !!



day one, per the instructions



today, per some breakages, post reading, and creative modding



Hector is offline   Reply With Quote
Old 08-07-2010, 01:16 AM   #1133
cherry bomb
 
fred0000's Avatar
 
Join Date: Jul 2006
Location: Nanaimo, BC, Canada
Posts: 1,598
Default

my custom AX10 crawler. (custom, or bolt on? I dunno, I like it)

started as a stock ARTR kit when I got it,

-Integy Matrix pro 55t motor
-Integy HD Driveshafts
-Robinson Racing solid steel gear/outputs
-XL5 waterproof ESC (mounted on front links)
-Team Associated TX/RX
-towerpro MG996R steering servo with alum. horn
-turnigy 1600mah 2 cell lipo (mounted on rear links)
-weighted wheels/cut foams (proline hammers)
-Integy steel tube chassis, skinned with soda cans
-RC4WD 109mm aluminum bodied shocks, REALY soft springs. (I did not like the ride height I got with the ARTR shocks)

next on the list is aluminum wheels, and a new set of tires, still unsure on what though.

might be forgetting stuff, i'd like to know what you guys think of it.







thanks for looking, cheers






fred0000 is offline   Reply With Quote
Old 08-08-2010, 09:36 AM   #1134
Rock Stacker
 
Join Date: Feb 2009
Location: Granite Falls
Posts: 53
Default T1E Chasis

My Axial Moonbuggy
Dirtburn is offline   Reply With Quote
Old 08-14-2010, 10:55 AM   #1135
Pebble Pounder
 
Join Date: May 2010
Location: Sunrise
Posts: 110
Default

FF-4 chassis (thanx DickyT)
VP dig
MIP drive shafts
Hitec 7950 servo
LD bta
G made shocks
Novak 55
Gold Losi springs
Rooster crawler esc
Motoworx 7 spoke AL wheels
White rovers
Pro line 2 stage foam
Axial high knuckles
Unkown al C's
CC BEC 7v
Gunnar body mounts
Hitec 645 dig servo
Racers edge pro servo horn
3 Racing cvd
homemade links
2s batteries
Proline Crowd Pleazer body



Last edited by Rocky666; 08-14-2010 at 04:15 PM.
Rocky666 is offline   Reply With Quote
Old 08-18-2010, 11:03 PM   #1136
Quarry Creeper
 
Join Date: Jun 2009
Location: Visalia, CA
Posts: 345
Default

Started life as an AX-10 Kit:

CHASSIS: VP Incision
AXLES: Front- Axial heavy duty R&P, Axial CVDs, HR heavy duty spool, RCP Cs
Rear-VP lockouts, VP Razor shock mounts, Axial Straights, TCS Boomerang uppers mount, Axial heavy duty R&P

STEERING: Hitec HS 7950TH (w/ Hot Bodies aluminum arm), CKRC BTA w/CKRC high steer knuckles

SUSPENSION: 3 link front / 4 link rear, Axial Comp Shocks, Axial 70mm uppers, East End Machining
lowers (bent rears)
DRIVETRAIN: VP transmission housing w/ HR aluminum gears, spur and spur mount, VP Hurtz Dig w/
Hitec servo (cheapie for now!), MIP cvd drive shafts

WHEELS & TIRES: Pro Line Chisels on Mayhem Engineering Competition Double Phattys

ELECTRONICS: Novak Goat w/ 55 brushed motor, Spektrum DX3R w/ sr3100 receiver, CKRC 1300mah
7.4v lipo
BODY: Axial XC-1 Black w/ Tamiya dull coat on outside
Attached Images
                 
NorZepol is offline   Reply With Quote
Old 08-19-2010, 01:28 PM   #1137
Pebble Pounder
 
Join Date: Jun 2010
Location: pelham
Posts: 144
Default

Axial AX10
HR Chassis
HR skid plate
HR bent lower links
HR upper links
HR Stearing links
HR shocks
Losi Rock Claws cut foams
CC SideWinder esc
JR Racing Z590M servo

parts yet to put on, new body, Sedonas, new servo, internals.

heres some action shots from today

Axialfan19 is offline   Reply With Quote
Old 08-20-2010, 09:08 AM   #1138
Pebble Pounder
 
Join Date: Mar 2010
Location: Jacksonville
Posts: 108
Default

My turn:

Bought used ax10 with alloy links and 3racing chassis.
Hot Racing dig
Novak 55t
3racing front driveshaft

I've since added 4s lipo, HH BR-XL, MIP driveshaft rear, and rc4wd aluminum wheels with panther leopard tires.



cwettstain is offline   Reply With Quote
Old 08-22-2010, 05:01 PM   #1139
Pebble Pounder
 
Join Date: Jul 2008
Location: saipan cnmi
Posts: 153
Default ax10 warthog

here is my comp ready ax10 with warthog chassis. what you guys think???

she used to look like this:



now she looks like this:







questions welcomed...thanks for looking!
SCORPIAN670 is offline   Reply With Quote
Old 08-22-2010, 10:58 PM   #1140
Newbie
 
Join Date: Aug 2010
Location: jennifer18
Posts: 1
Default

Quote:
Originally Posted by scatterbrains View Post
Heres mine
55T lathe motor
futaba mc230cb ESC
hitec 645MG
controlled by futaba 3pjs

New paint for his rig! He actually helped airbrush this one.
__________________
watch movies online
jennifer18 is offline   Reply With Quote
Reply



LinkBacks (?)
LinkBack to this Thread: http://www.rccrawler.com/forum/axial-ax-10-scorpion/82403-axial-ax-10-picture-archive-no-talking.html
Posted By For Type Date
RE: Anyone Have a Mini MGT? This thread Refback 10-05-2011 08:59 AM

Axial AX-10 Picture archive - No talking - Similar Threads
Thread Thread Starter Forum Replies Last Post
1.9 scale rig picture archive - No talking 123abc 1.9 Scale Rigs 1974 04-16-2021 12:19 AM
Wraith Picture Archive - No talking Harley Axial Wraith 1568 04-15-2021 05:13 AM
SCX10 Picture Archive - No talking BENDER Axial SCX-10 3323 04-01-2021 10:42 AM
1.5 scale picture archive - No talking 1BadJeepBruiser 1.5 Scale Rigs 346 03-24-2021 05:56 AM
Redcat Picture Archive - No talking EeePee Redcat Crawlers 384 03-22-2021 06:00 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 02:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com