RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial AX-10 Scorpion (http://www.rccrawler.com/forum/axial-ax-10-scorpion/)
-   -   Axial AX-10 Picture archive - No talking (http://www.rccrawler.com/forum/axial-ax-10-scorpion/82403-axial-ax-10-picture-archive-no-talking.html)

racer 01-14-2008 07:16 PM

here's mine
 
mm speedo,react radio,55turn brushed...http://i248.photobucket.com/albums/g...2/ax-10005.jpg

FROADER 01-14-2008 07:30 PM

^^ Nice FJ "thumbsup"

Novak Rooster Crawler
Fifty Five
Tq3

http://i184.photobucket.com/albums/x...r/IMG_3552.jpg

http://i184.photobucket.com/albums/x...r/IMG_3570.jpg

crawlbe4youwalk 01-14-2008 08:43 PM

4 Attachment(s)
Here are a few pics of my scorpions getting dirty!:flipoff:

Attachment 53389


Attachment 53390


Attachment 53391

New Edge kicks azz!!
Attachment 53392

punkafi888 01-16-2008 02:19 PM

here is my ax10, its nothing special. a 75t integy motor, gt7 esc, airtronics fm recever. no foams, loads of bb's, custom bent links, savage soft springs.
http://img523.imageshack.us/img523/1...1377tg3.th.jpghttp://img135.imageshack.us/img135/3...1372nd0.th.jpg

Panchira! 01-16-2008 09:16 PM

my ride:

http://i92.photobucket.com/albums/l1...8_01160022.jpg

and its motor:

http://i92.photobucket.com/albums/l1...8_01110017.jpg

shortlux 01-17-2008 03:16 AM

My bug
http://i126.photobucket.com/albums/p...d/IMG_1440.jpg

http://i126.photobucket.com/albums/p...d/IMG_1408.jpg

http://i126.photobucket.com/albums/p...d/IMG_1384.jpg

http://i126.photobucket.com/albums/p...d/IMG_1442.jpg

rojo 01-17-2008 01:14 PM

1 Attachment(s)
One of mine...

Major Bummer 01-21-2008 02:34 PM

here is my AX10
novak 55 crawler
tazer 15t
mini-t 1100
Hitech 2 AM
old Tmaxx body
Hitech high torque servo
Race compound tires

http://i44.photobucket.com/albums/f4...8/DSCF1522.jpg
http://i44.photobucket.com/albums/f4...8/DSCF1524.jpg
http://i44.photobucket.com/albums/f4...8/DSCF1528.jpg
http://i44.photobucket.com/albums/f4...8/DSCF1523.jpg
http://i44.photobucket.com/albums/f4...8/DSCF1530.jpg
http://i44.photobucket.com/albums/f4...8/DSCF1531.jpg

breitenbach14 01-21-2008 11:08 PM

my second crawler
 
i got an axial scorpion because i wanted a better crawler from my wheely king so i got this. i have a
whelly king
*transmitter
*esc
*and reciver
*futaba high tourqe servo
*and inigy 55t lathe motor
also this is my second crawler and my first body that i painted


http://i267.photobucket.com/albums/i...nathans005.jpghttp://i267.photobucket.com/albums/i...nathans001.jpg

psychobilly78 01-22-2008 11:21 AM

h2 rock crawler
 
HELLo everybody! wazzuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuup :lol:

I.m from finland and here are few pictures of my axial h2 crawler (hard bodies)

http://kuvablogi.com/nayta/iso/img863685.jpg

http://kuvablogi.com/nayta/iso/img863684.jpg

http://kuvablogi.com/nayta/iso/img863683.jpg

http://kuvablogi.com/nayta/iso/img872525.jpg

neo82575 01-22-2008 07:03 PM

my edge,

not really sure if i'm liking the orange with the green yet.


http://img120.imageshack.us/img120/6038/dscn0170ip1.jpg

manike 01-22-2008 10:13 PM

My AX10.

I've made a few mods, and more to come and as I build my own rear steering kit. :)

I haven't tidied up all the wiring yet. I'll do that once I get everything situated in it's final places.

Just today I got my split cell battery packs which I'll be mounting on the axles to get the centre of gravity down as low as possible.

I also got the bent linkages bars and ball joint links so I can make the rear steer kit. You can see I have the rear servo installed anyway.

3.5 Oz of lead in each rear, and just over 7 Oz of lead in each front.

Pics!

http://i49.photobucket.com/albums/f2...ike/ax10-1.jpg

http://i49.photobucket.com/albums/f2...ike/ax10-2.jpg

http://i49.photobucket.com/albums/f2...ike/ax10-3.jpg

http://i49.photobucket.com/albums/f2...ike/ax10-4.jpg

http://i49.photobucket.com/albums/f2...ike/ax10-5.jpg

http://i49.photobucket.com/albums/f2...ike/ax10-6.jpg

http://i49.photobucket.com/albums/f2...ike/ax10-7.jpg

http://i49.photobucket.com/albums/f2...ike/ax10-8.jpg

madmaxxed 01-23-2008 10:44 AM

my ax10...
-edge chassis
-panels from lexan sheet
-novak rooster crawler
-integy 55t
-traxxas tq2 rx/tx
-axial bent links
-proline moabs
-modified battery plate to clear the spur gear
-internal springs (no droop set up)
***on order, traxxas big bores and axle mount battery packs
http://img.photobucket.com/albums/v6...xxed/edge1.jpghttp://img.photobucket.com/albums/v6...xxed/edge3.jpghttp://img.photobucket.com/albums/v6...xxed/edge4.jpghttp://img.photobucket.com/albums/v6...xxed/edge2.jpg

Flatcrawlr 01-23-2008 08:49 PM

Update:

http://i116.photobucket.com/albums/o...mptruck004.jpg
http://i116.photobucket.com/albums/o...mptruck008.jpg
http://i116.photobucket.com/albums/o.../ebay010-1.jpg
http://i116.photobucket.com/albums/o...mptruck017.jpg
http://i116.photobucket.com/albums/o...co/misc005.jpg
http://i116.photobucket.com/albums/o...co/misc001.jpg

55T Integy
Mamba max w/ CC bec
hitec 645
custom 7cell saddle
Losi claws on aluminum beadlocks
upgraded c's, knuckles, skid, links, springs, driveshafts, yolks, servo arm

Panchira! 01-23-2008 10:07 PM

***UPDATE***

AX10
mamba max (lost in mail/ awaiting for it to be in stock again)
holmes hobbies 3014 crawl master
spectrum dx3.0
hitec HS985MG
bent links
rcp solid rear axle
rcp c hubs and knuckles
1300mah lipo(in the mail)
punisher shafts
and some other goodies :)


http://i92.photobucket.com/albums/l1...8_01230001.jpg
http://i92.photobucket.com/albums/l1...8_01230002.jpg
http://i92.photobucket.com/albums/l1...8_01230003.jpg
http://i92.photobucket.com/albums/l1...8_01230004.jpg
http://i92.photobucket.com/albums/l1...8_01230005.jpg
http://i92.photobucket.com/albums/l1...8_01230006.jpg
http://i92.photobucket.com/albums/l1...8_01230007.jpg
http://i92.photobucket.com/albums/l1...8_01230008.jpg

Trimmy 01-24-2008 10:37 PM

Here is my AX-10

Edge Chassis
Novak Rooster Crawler
Tower Pro MG995
Traxxas 2215 Receiver & TQ3
RC4wd Rock Crushers
Axial Bent links
TCS 4 link front & rear
TCS 7 cell axle pack
TCS medium internal springs
Stage 2 mods
Custom Recever/esc trays

http://i48.photobucket.com/albums/f2...X-10/edgeN.jpg

http://i48.photobucket.com/albums/f2...-10/edgeN1.jpg

http://i48.photobucket.com/albums/f2...-10/edgeN2.jpg

http://i48.photobucket.com/albums/f2...-10/edge16.jpg

http://i48.photobucket.com/albums/f2...-10/edge15.jpg
"thumbsup"

freestyle 01-24-2008 11:53 PM

TCS "Edge"
TCS High clearance links
TCS Aluminum Upper Link/Servo Mounts (2)
TCS Aluminum Axle Plates
TCS "Monster" Delrin Rock Rings
BM17 Brushless Motor
Castle Creations Mamba Max
Futaba Radio
Home made 6 cell split pack
Polished Links
Southpark panels w/ custom top cover for electronics
6oz. front 3oz rear lead weight

http://i45.photobucket.com/albums/f9...n/P1240488.jpg
http://i45.photobucket.com/albums/f9...n/P1240489.jpg
http://i45.photobucket.com/albums/f9...n/P1240490.jpg
http://i45.photobucket.com/albums/f9...n/P1240491.jpg
http://i45.photobucket.com/albums/f9...n/P1240482.jpg
http://i45.photobucket.com/albums/f9...n/P1240484.jpg
http://i45.photobucket.com/albums/f9...n/P1240492.jpg

Raney120 01-25-2008 06:58 PM

http://i150.photobucket.com/albums/s...bstruck004.jpg
http://i150.photobucket.com/albums/s...bstruck003.jpg

xirtic 01-26-2008 07:19 PM

My Grape Pearl Scorpion
 
2 Attachment(s)
Axial AX10 Scorpion
Novak 55t
Traxxas XL5 ESC
Spektrum DX3.0
Skyion/CEN 144oz MG Servo
Split Battery Pack

TankFarmer 01-27-2008 05:52 AM

JR Racing XS3 Pro Radio
JR Racing Z590M HT Servo
TCS High Clearance Links
TCS Delrin Boomerang Upper Link Mount
Integy MSR10 Internal Spring Shocks
Integy V10 Rock Crawler Professional Motor 75S
Novak Crawler Edition Rooster ESC
RC4WD Mud Slingers 2.2
Losi Grappler Body

http://i132.photobucket.com/albums/q...ockracer-1.jpg

http://i132.photobucket.com/albums/q...ockracer-2.jpg

http://i132.photobucket.com/albums/q...ockracer-3.jpg

AnEv942 01-27-2008 07:10 PM

basically stock
 
AX10
Integy 80s motor
Traxxas XL-5 ESC
JR XR3i radio
Futaba S3305 servos
10t pinion
bodies Betty and stock Turbo Optima
dove tailed Jeep Cj, VW
stock tire & wheels

Fab work
strip/drill chassis and links
strip flip drill & slot top plate
made new bottom plate
"Nerf Pods" (just to be different, goin inside w/ links works)
set up for full time rear steer normal/crab (way too much fun)
shorten/lengthen servo wires (not too much fun)
drive shaft brass tubes and top collars
drill tap and bend 1/4' alum tube for bent lower links
used stock bottom plate for RX
custom servo mounts
custom split battery mounts
mod battery for saddle mounting
drill shock pistons add 3/32" hole 30wt oil (going to 1000 w/ soft springs)
mod radio handle 'c' button for direct menu acces/rear servo switching on the fly
motor flip
to do
longer servo mounts for upper link mounting
fix it as it breaks :shock:

https://photos.smugmug.com/Base/Ax10...PA100025-M.jpg

https://photos.smugmug.com/Base/Ax10...P1260027-M.jpg

https://photos.smugmug.com/Base/Ax10...P1260028-M.jpg

https://photos.smugmug.com/Base/Ax10...1260029-XL.jpg

https://photos.smugmug.com/Base/Ax10...P2110035-M.jpg

https://photos.smugmug.com/Base/Ax10...p040036-XL.jpg

stublet 01-28-2008 08:27 PM

my ax10
 
9 Attachment(s)
been working on this since november:shock:
novak rooster crawler esc
integy 55t
tq2 (tq3 on it's way)
some sort of hobbico servo (works great though)
homade delrin links, skid plate, 4-link lexan upper link mounts
grappler body
losi soper soft springs
coper plumbing bushings on drive shafts
radio tray made from old battery mounting
relocated body posts
50wt oil in left rear shock
6 cell saddle pack
works great, almost no tourque twist, very low cg,
blackjack, hc links,dig and maybe brushless on the way"thumbsup"
Attachment 54613

Attachment 54614

Attachment 54615

Attachment 54616

Attachment 54617

Attachment 54618

Attachment 54619

Attachment 54620

Attachment 54621

finishline 01-28-2008 08:39 PM

My Trail/Crawler ax10 moded New Bright rock crawler body made to fit my scorpion"thumbsup"http://i227.photobucket.com/albums/d...e/DSCN3749.jpg

dirtydirtysouf 01-29-2008 07:41 AM

http://webwheeling.com/gallery/d/46180-2/RC8.JPG
prettyt much factory except grooved/cut rock lizards

aychdee 01-30-2008 04:38 PM

My AX-10

specs.
-Novak Rooster
-Hitec metal gear high torque
-JR XR3i
-integy 55t
-modded skid plate and link mounts
-Pro line Moabs
-Semi droop, probably go back to outer spring mounts (an awesome setup is only as good as it's driver.....(and I suck .......for now)
-TCS boomerangs front and rear
-homemade saddle packs
-HPI Rubicon and Pro-line Harddrive bodies

http://im1.shutterfly.com/procserv/4...100CZMWThs3cMX
http://im1.shutterfly.com/procserv/4...100CZMWThs3cMX
http://im1.shutterfly.com/procserv/4...100CZMWThs3cMX
http://im1.shutterfly.com/procserv/4...100CZMWThs3cMX

CeeBlock 01-30-2008 06:07 PM

heres mine:
stock chassis
tcs internal "medium" shock springs
shock spacer inside shock for lowered ride hieght
integy 65t lathe
links de anodized and polished mounted inside chassis
proline masher m2's
hpi deep offset wheels
proline f250 body
novak super rooster
Hitec 645
stick and saddle pack mounts on front axle.
balanced chassis(highly suggested)


http://i117.photobucket.com/albums/o...cture351-1.jpg
http://i117.photobucket.com/albums/o...cture357-1.jpg

The flex shot:
http://i117.photobucket.com/albums/o...Picture365.jpg

BIGBIRD 01-31-2008 11:19 AM

http://i102.photobucket.com/albums/m...D/DSC00193.jpg
http://i102.photobucket.com/albums/m...D/DSC00194.jpg
http://i102.photobucket.com/albums/m...D/DSC00196.jpg
http://i102.photobucket.com/albums/m...D/DSC00177.jpg
http://i102.photobucket.com/albums/m...D/DSC00160.jpg
THIS IS MY BEHIND FRONT AXEL STEERING
http://i102.photobucket.com/albums/m...D/DSC00140.jpg
http://i102.photobucket.com/albums/m...D/DSC00139.jpg

Nacho 02-01-2008 03:39 PM

Ax10
Rooster Crawler esc/motor combo
Hitec 645
Traxxas tq3 and receiver
4 link frnt/rear (bent)
Moab 2.2 M2's
Stage 2 kit on its way


http://i27.photobucket.com/albums/c1...p/100_1822.jpg
http://i27.photobucket.com/albums/c1...p/100_1823.jpg

EeePee 02-01-2008 03:49 PM

Hey guys, as fun as deleting posts is, please stop posting chit chat or questions in this thread.

GH Racing 02-01-2008 06:58 PM

Here's Our Ax10 Scorpion :)
http://www.sfu.ca/~wlp/GH%20Racing/AX10/DSC02853.JPG
http://www.sfu.ca/~wlp/GH%20Racing/AX10/DSC02852.JPG
http://www.sfu.ca/~wlp/GH%20Racing/AX10/DSC02851.JPG
http://www.sfu.ca/~wlp/GH%20Racing/AX10/DSC02850.JPG
http://www.sfu.ca/~wlp/GH%20Racing/AX10/DSC02848.JPG
http://www.sfu.ca/~wlp/GH%20Racing/AX10/DSC02847.JPG
http://www.sfu.ca/~wlp/GH%20Racing/AX10/DSC02846.JPG
http://www.sfu.ca/~wlp/GH%20Racing/AX10/DSC02845.JPG
http://www.sfu.ca/~wlp/GH%20Racing/AX10/DSC02841.JPG
http://www.sfu.ca/~wlp/GH%20Racing/AX10/DSC02840.JPG
http://www.sfu.ca/~wlp/GH%20Racing/AX10/DSC02836.JPG

TRA3905 02-02-2008 06:23 AM

here's mine after the build. no upgrades included. update to follow. I love this thing...first build so the body came out kinda crappy...
http://i260.photobucket.com/albums/i...3905/012-1.jpg
http://i260.photobucket.com/albums/ii6/tra3905/016.jpg
http://i260.photobucket.com/albums/ii6/tra3905/018.jpg
http://i260.photobucket.com/albums/i...3905/019-1.jpg
http://i260.photobucket.com/albums/ii6/tra3905/022.jpg

Jeepernick 02-04-2008 04:32 PM

AX-10 Axles
AX-10 Tranny
HiTech Servo, Radio and res
Rooster Crawler motor/esc
Maxx shafts
custom this custom that.....
http://img139.imageshack.us/img139/3...0103uq3.th.jpg
http://img267.imageshack.us/img267/6...0104oc9.th.jpg
http://img204.imageshack.us/img204/4...0106xh6.th.jpg
http://img204.imageshack.us/img204/3...0107sa8.th.jpg
http://img204.imageshack.us/img204/6...0108ju8.th.jpg
http://img204.imageshack.us/img204/6...0109ml7.th.jpg
http://img204.imageshack.us/img204/8...0110lu2.th.jpg
http://img204.imageshack.us/img204/2...0111qe0.th.jpg
http://img204.imageshack.us/img204/8...0112jf8.th.jpg
http://img204.imageshack.us/img204/8...0113te6.th.jpg
http://img204.imageshack.us/img204/2...0114ib9.th.jpg
http://img204.imageshack.us/img204/3...0115gi4.th.jpg
http://img204.imageshack.us/img204/1...0116ys5.th.jpg
http://img204.imageshack.us/img204/5...0117aq3.th.jpg
Sorry for all the poser shots, I keep forgetting the camera when I go crawling... and the course is in the back yard and at work...LOL

dirtboy 02-04-2008 10:00 PM

My first real crawler....planned on a tuber, but never followed through.

Has the usual stuff
Stage 2 Kit
Rooster crawler 55 package
deanodized most of the green
cut the foams
blah...blah....blah...all the usual stuff.
Tons of torque twist so I put in a rear aluminum plate and will be moving the mounts around to try to sort it out.
130W oil in the left rear shock
HPI whites in front, yellows in back
....and an old traxxas radio setup I had

not great pics yet, but it's 95% finished. Body still needs to get positioned and drilled.

Hoping to make it to some gtg's soon for some crawling and feedback from others. Great site...always a blast to see what everyone else has got going on.

http://usera.imagecave.com/jayzilla/IMG_4206.JPG

General Sherman 02-05-2008 11:15 PM

i'll add mine to the m
 
http://i274.photobucket.com/albums/j...7FordRC001.jpg
http://i274.photobucket.com/albums/j...7FordRC007.jpg
http://i274.photobucket.com/albums/j...7FordRC004.jpg

Panchira! 02-06-2008 08:05 PM

after some more mods.......

http://i92.photobucket.com/albums/l1...8_02060001.jpg
http://i92.photobucket.com/albums/l1...8_02060007.jpg
http://i92.photobucket.com/albums/l1...8_02060004.jpg
http://i92.photobucket.com/albums/l1...8_02060005.jpg

DieselPhotos 02-07-2008 09:40 AM

http://img176.imageshack.us/img176/9...ture014kk5.jpg

xirtic 02-08-2008 07:57 PM

My Betty
 
6 Attachment(s)
Spektrum DX 3.0
Traxxas XL5 ESC
Novak 55T Brushed Motor
TCS Bent Lower Links
TCS 4 Link Plates F/R
RC4wd R2D Transmission
TCS Transmission DIG Servo Mount
Spektrum Z590 DIG Servo
Skyion 10KG Steering Servo
TCS R2 Transmission Mount/Skid Plate
TCS Medium Internal Springs
Elite 6 Cell Split Pack on Front Axle
TCS Axle Battery Plates
Star Cut Foams

EeePee 02-08-2008 09:41 PM

Quote:

Originally Posted by EeePee (Post 1034580)
Hey guys, as fun as deleting posts is, please stop posting chit chat or questions in this thread.

You guys can read right?

lIRATIl 02-10-2008 12:37 PM

Flat Betty
 
Finally got it together and working.

Axial Tranny and Axles
Blackjack Chassis
Traxxas Hard Anodized 3.5 Shocks
Custom male-female-male Pede shafts
IMEX Rubicons soft
12 tooth pinion
Lengthened uppers
Bent stock lowers
Novak Rooster Crawler
Integy 55t
TQ3 with 3rd channel mod
5.5oz lead in each front
2oz lead in each rear
Starcut Axial foams
TCS Axle plates
7 cell split pack
Hitec HS5955

http://i83.photobucket.com/albums/j3...Il/ryan059.jpg
http://i83.photobucket.com/albums/j3...Il/ryan065.jpg
http://i83.photobucket.com/albums/j3...Il/ryan067.jpg
http://i83.photobucket.com/albums/j3...Il/ryan068.jpg
http://i83.photobucket.com/albums/j3...Il/ryan069.jpg
http://i83.photobucket.com/albums/j3...Il/ryan070.jpg

Crossedup 02-11-2008 07:42 PM

Red Bull Edge
 
http://i260.photobucket.com/albums/i...e/DSC01728.jpg
http://i260.photobucket.com/albums/i...e/DSC01730.jpg
http://i260.photobucket.com/albums/i...e/DSC01734.jpg
http://i260.photobucket.com/albums/i...e/DSC01732.jpg
http://i260.photobucket.com/albums/i...e/DSC01731.jpg
http://i260.photobucket.com/albums/i...e/DSC01733.jpg
http://i260.photobucket.com/albums/i...e/DSC01729.jpg


All times are GMT -6. The time now is 06:25 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com