Axial AX-10 Picture archive - No talking 4 Attachment(s) This thread is for COMPLETED pictures of your Axial AX-10 Scorpion crawler. No in progress build pictures, just ready to go finished crawlers. Also post a list of specs so people know what you are running. Also feel free to link to your personal build thread if you have one. I'll start, here is my AX-10 ready to go, specs are as follows. Integy 55 turn lathe motor. Mamba Max ESC. 11.1V lipo mounted on the front upper links. Hi-Tec 5955 TI geared servo. Race compound Axial Rock Lizards. Here is a link to my build thread http://www.rccrawler.com/forum/axial-ax-10-scorpion/79879-live-axial-ax-10-build.html The first pics are with the stock B-17 body, the second pics are with the HPI Baja Bug body. |
Losi Rock Claws Trinity Bomb One foam inserts (truck rear)(buggy front) JR 9000T w/ Dynamite aluminum horn Novak Rooster 12T Spektrum Rx w/ capacitor dealy Thunder Power 2070 2S Integy 55T 12" wheelbase w/ custom front upper mounts to bring the caster back to where it belongs. Currently running the stock body...will have an HPI Bronc when I get around to painting it, hence the 12" wheelbase. http://i133.photobucket.com/albums/q.../scorpion3.jpg http://i133.photobucket.com/albums/q.../scorpion5.jpg |
Got my Ax10 built today.The build went pretty smooth.The only problem was that one of the driveshafts split at the tiny holes were the universal pins go.They look like the Traxxas shafts so replacements are in need!I installed the electronics i had laying around-not really crawler material but will work for now.Mounted up my trail body till i can get the Betty body painted up.This is my first crawler and im not too fond of the bead-locks.I srtuggled to get them mounted and there still a little wobbly.This is one cool truck-Good Job Axial!!!!!!!!!!!!!!!!!!!!!!!:-P Futaba radio Hitec 645MG servo Trinity Speed Gems 14D motor Hitec EZXR Pro ESC Epic 3000mah batts Venom pre-painted Suburban http://img263.imageshack.us/img263/7...9mediumvu1.jpg One more pic!!!:-Phttp://img168.imageshack.us/img168/9...6mediumcu2.jpg Got my Betty body painted tonight-I love the looks of this body.:)http://img211.imageshack.us/img211/1...3mediumnd5.jpg One more!"thumbsup"http://img211.imageshack.us/img211/7...2mediumta5.jpg Been posted before too-here too is some by the water.Pool water that is!:lol: http://img519.imageshack.us/img519/4...7mediumil9.jpg http://img512.imageshack.us/img512/1...1mediumsr4.jpg Poser Pics!:) http://img164.imageshack.us/img164/4...7mediumvp4.jpghttp://img509.imageshack.us/img509/8...4mediumyi8.jpg Received my ARTR this morning.I had an original AX-10 kit and sold it on ebay last winter.Heres a pic of the old truck & the new one!!!:) http://img211.imageshack.us/img211/5279/ax103hn1.jpg http://img211.imageshack.us/img211/7...3mediumkj2.jpg http://img211.imageshack.us/img211/5...5mediumuf4.jpg http://img211.imageshack.us/img211/9...6mediumqx5.jpg Heres a few pics of my new ARTR.I had an extra Crowd Pleazer body for my Revo that i just sold.I did a little creative cutting to get it to mount on the AX-10 chassis.:) http://img515.imageshack.us/img515/9...1mediumjz2.jpg http://img515.imageshack.us/img515/5...3mediumau5.jpg "Shelf Queen" AX-10 ARTR & basher Stampede! http://i23.photobucket.com/albums/b3..._2681Small.jpg |
http://www.imagestation.com/picture/...1/e80aa26a.jpg http://www.imagestation.com/picture/...9/e8102671.jpg running 55t hand wound. 2070 mAh lipo. tmaxx aluminum shocks. Rooster spektrum dx2 Works very goood-- Did till i broke a knuckle, now gotta wait for aluminum ones to come out :( So my new tuber for it begins |
Axial ax10 RCP 248.00 shipped Moped VR16 esc vendor 25.00 shipped Hitec 645 servo RCP 38.00 shipped TQ3 traxxas Ebay 25.00 shipped 55T lathe + 20.00 paint 12.00 $368.00 http://i131.photobucket.com/albums/p.../ax10my057.jpg http://i131.photobucket.com/albums/p.../ax10my011.jpg (Soon novak rooster crawler and losi rock claws bug body) now ELEC. RCE ESC, RCP streight axle lock out, RCP C's & knuckles 4 link/dig mounts.& rock claws http://i131.photobucket.com/albums/p...t/4link029.jpg http://i131.photobucket.com/albums/p...t/4link032.jpg [/IMG]http://i131.photobucket.com/albums/p...t/4link028.jpg http://i131.photobucket.com/albums/p...ut/hanging.jpg |
Axial AX-10 Chasis Moped V16 ESC Integy 55T Motor Hitec HS-645 MG Servo F-650 Modded Body (Was a "throw away") B17 Betty Body Losi Grappler Body Proline Crowd Pleazer Body JR Controller. Losi Rock Claws "The Edge" Chassis coming soon http://img341.imageshack.us/img341/4228/img6685ce1.jpg http://img442.imageshack.us/img442/2359/img6686ev4.jpg http://img183.imageshack.us/img183/9453/img6688tm7.jpg |
Intellespeed 16t esc 50t Integy motor Hitec 5995tg servo Shocks shortened internally about 1/2" Truck foams in tires Right now I have left it pretty stock to see what it could do but I'm sure I will be getting the servo/battery mount for the front and probably running some nicer stuff soon. http://i146.photobucket.com/albums/r...c/IMGP2174.jpg http://i146.photobucket.com/albums/r...c/IMGP2173.jpg http://i146.photobucket.com/albums/r...c/IMGP2171.jpg |
Oh Black Betty! That's right, I got the name on here first! :flipoff: BM9 brushless motor from The Crawler Store Mamba 25 ESC Airtronics 361 servo Spektrum DX3 radio Elite 1500 2/3A battery pack Not done yet... http://img442.imageshack.us/img442/2788/img8202as1.jpg Cool truck, but I want the body to be higher up. Sky high! 8) |
Quote:
Nice name! For the youngsters that won't get it, Click Here |
Heres mine. 45T Integy Lathe motor Mamba max ESC 3200Mah 7.4v Lipo Hitec 5955TG servo 4oz of airsoft BB's in the stock tires http://img.villagephotos.com/p/2004-...2/DSCF0189.jpg |
Here is my son's AX-10. He built most of it.:roll: Spektrum Dx3.0 radio Futaba MC330 or 230. Can't remember! 55 turn integy lathe motor Air 94358 servo Moab tires Runs a lipo pack and Novak voltage cutoff. I have a new bug body we are painting for it. Used this one for now! http://i133.photobucket.com/albums/q...26-07_3437.jpg http://i133.photobucket.com/albums/q...26-07_3439.jpg http://i133.photobucket.com/albums/q...26-07_3444.jpg http://i133.photobucket.com/albums/q...26-07_3438.jpg Fit and finish on all the items were great. Axial did a great job!"thumbsup" |
Heres mine 55T lathe motor futaba mc230cb ESC hitec 645MG controlled by futaba 3pjs http://i23.photobucket.com/albums/b3...0firstrun1.jpg |
New paint for his rig! He actually helped airbrush this one. http://i133.photobucket.com/albums/q...27-07_3583.jpg http://i133.photobucket.com/albums/q...27-07_3585.jpg |
|
My AX10: Black and Green Overdose -55t hand wound Integy -Rooster crawler esc -Hitec 5625MG -Futaba 3PM -Losi rock claws -Kreepy Krawler red narrow foams in front w/3.5oz of stick on lead weight, stock foams narrowed in rear, 2x 1/8 holes drilled in each wheel -HPI baja bug body -7 cell elite 2/3A saddle pack from CBP Soon to add dig and maybe even a tube chassis http://i165.photobucket.com/albums/u...z/DSC00615.jpg http://i165.photobucket.com/albums/u...z/DSC00624.jpg http://i165.photobucket.com/albums/u...z/DSC00623.jpg |
Another AX10 :) -Novak Rooster Crawler ESC -Integy V10 Rock Crawler 55T motor -Futaba S3305 high-torque metal gear servo -Nomadio V2 transceiver w/ voltage sensor -3600mAh NiMh 6-cell battery Aside from my homebrew front axle battery/servo mount, everything is completely stock. The foams are channel-cut, and I'm currently running 8oz of stick-on weights in each front wheel and 3oz in each rear wheel. It seems to do pretty well with this setup, but I haven't had much wheel time with it. Time will tell. ;-) I'll be upgrading to a 2S Lipo pack shortly, and I'd like to add a dig system as well. http://shawnandtom.com/AX10_IMG_4524_sm.jpg http://shawnandtom.com/AX10_IMG_4525_sm.jpg http://shawnandtom.com/AX10_IMG_4544_sm.jpg |
axial ax10 3 Attachment(s) ax10 chassis and Setup. Mamba Max 60 turn Integy V10 TQ3 radio.. stick packs up top hitec HS645MG Rockwerks Cherokee Baja Body I'm going to run it like this for a few weeks, then lipo's and crawlmaster will be the final setup.. crawls great, even with the high COG with the stick packs up top... Obviously it will only get better with a small lipo on the front axle!! |
I'll play. Airtronics 94358 8 Cell 1500 ELITE Mamba Maxx 55T Integy Lathe Betty body (hacked up) http://a790.ac-images.myspacecdn.com...326408c9b5.jpg http://a873.ac-images.myspacecdn.com...ac132547d8.jpg http://a970.ac-images.myspacecdn.com...2277175a59.jpg http://a715.ac-images.myspacecdn.com...eaa9cac92a.jpg |
Pierce's Bengal Crusher 3 Attachment(s) Here are a few pictures of my son's AX-10. We are still waiting on the Mamba Max speed controller. Can you tell his little league team is the Bengals. I would have painted it Cowboys Navy and Silver...lol Attachment 41942 Attachment 41943 Attachment 41944 "thumbsup" |
just a stock form ax-10 with a k-5 bodie integy 65t lathe motor 14t pinion 87 spur hitec 107 oz tourqe servo cheap 40$ esc jr s 400 air plane radio esc/rx are plasty dipped but not yet water proof http://i100.photobucket.com/albums/m...ick_09/003.jpg |
Mamba Max ESC BM9 Brushless Motor Blue Bird BMS-660MG+HS (Torque 181 oz-in@4.8V and At 6.0V 14.6kg-cm , 195 oz) Sun power 7,2V NiMH 4000 mAh (Will be replaced by a 6 or 8 cell 2/3A Elite 1500 pack) Futaba 3PM This is my first paint job so it´s not so nice :-P My Gallery http://bjornsson.nl/bilder/albums/RC...r/IMG_2287.jpg http://bjornsson.nl/bilder/albums/RC...r/IMG_2299.jpg http://bjornsson.nl/bilder/albums/RC...r/IMG_2310.jpg http://bjornsson.nl/bilder/albums/RC...r/IMG_2305.jpg |
55T intigy and some old electrics from my kid brothers RC10 from back in the day. custom battery pack set up, and a bushwhacker / FJ45 pickup body, paint by Greg Brady. started out CAT yellow, but the rattle can F'n sucked.:twisted:I like the way it's chipping and scratching, crawls like a goat/millipede. http://img171.imageshack.us/img171/160/p9010032vb4.jpg |
Here is my AX10 Tuber: K9 Scar Tube Frame AX Axles AX Links AX Wheels Misc. AX parts Losi Rock Claws Hitec 5995ti Servo Mamba Max 45t Lathe (for now) Spektrum DX3.0 LiPo 2100's Building SWEET A$$ Tubers PRICELESS..."thumbsup" http://i25.photobucket.com/albums/c1...o/tuber016.jpg http://i25.photobucket.com/albums/c1...o/tuber014.jpg FatDog chassis Axial Running Gear Novak Goat esc and motor Hitec 5995tg ti servo MSD Erickson bead lock wheels Losi Rock Claw Tires http://i25.photobucket.com/albums/c1...o/tuber047.jpg http://i25.photobucket.com/albums/c1...o/tuber045.jpg FatDog "Rockstar'' chassis Axial Running Gear Novak Goat esc and motor Hitec 5995tg ti servo RC4wd "Rockstar" bead lock wheels Losi Rock Claw Tires http://i25.photobucket.com/albums/c1...o/tuber036.jpg http://i25.photobucket.com/albums/c1...o/tuber034.jpg Together http://i25.photobucket.com/albums/c1...o/tuber038.jpg http://i25.photobucket.com/albums/c1...o/tuber037.jpg |
4 Attachment(s) |
heres mine from way down in AUS my first crawler eagle racing 40t lov rev mtroniks viper truck speedy jr xs3 radio Hi Tec hs645 crappy venom 3600 stick pack http://i236.photobucket.com/albums/f...i-P1010106.jpg http://i236.photobucket.com/albums/f...i-P1010108.jpg and this is my crawling spot http://i236.photobucket.com/albums/f...i-P1010103.jpg |
My AX-10 from Italy.... Hitec HS5645MG Rooster Crawler Integy 45t http://i57.photobucket.com/albums/g2.../bigone021.jpg http://i57.photobucket.com/albums/g2.../bigone022.jpg |
Posted in here already.. but here are some updated pics from the lake. New body and extras coming soon.... maybe a new Chassis. (Premature Losi stickers :) ) Axial AX-10 Chasis Moped V16 ESC Integy 55T Motor Hitec HS-645 MG Servo F-650 Hacked Body w/ Ghetto Roll/light bar w/ RAM Lights. AE RC18 Controller :) Losi Rock Claws (coming soon) http://img210.imageshack.us/img210/3500/img6695vn4.jpg http://img339.imageshack.us/img339/1710/img6696xq5.jpg http://img339.imageshack.us/img339/9725/img6705ie5.jpg Not really even an AX-10 Picture.... but for the heck of it. http://img339.imageshack.us/img339/9859/img6697pn9.jpg |
My turn My AX-10 Tuber 55turn lathe Hitec 59997 6 cell match batts monster jordans Mamba max Dx3 http://i14.photobucket.com/albums/a3...c/DSC03014.jpg http://i14.photobucket.com/albums/a3...c/DSC03020.jpg http://i14.photobucket.com/albums/a3...c/DSC03021.jpg http://i14.photobucket.com/albums/a3...c/DSC03023.jpg http://i14.photobucket.com/albums/a3...c/DSC03028.jpg http://i14.photobucket.com/albums/a3...c/DSC03027.jpg http://i14.photobucket.com/albums/a3...c/DSC03018.jpg |
Here is mine I Just want to say thanks to my LHS and S1NN3R for all the help. For electronics I went cheap for now so I could play instead of look at it. I have a novak XRS then I just used my revo's TQ3 radio and just purchased another reciver then I am useing a integy 45T motor. and a venom 3300 nimh pack. So far the only things I have done to it I pulled all the foam out and put in a mixture of airsoft bb's and metal bb's. My front tires& wheels weigh around 11-12 oz. The rear tires weigh right around 9oz. And the only damage so far has been I popped the tops off the front shocks and striped out the servo arm (which is the one that came with the kit) So I modified one that came with the servo. And it works great and I dont think it will strip as easily. http://img.photobucket.com/albums/v7...f/DSC02836.jpg http://img.photobucket.com/albums/v7...f/DSC02833.jpg http://img.photobucket.com/albums/v7...f/DSC02831.jpg |
My first 2.2. Mamba Max ESC Holmes Hobbies Scorpion 1000kv outrunner Hitec 5955-TG servo Traxxas TQ3 and reciever All powered with a 4800mah 11.1v lipo http://i196.photobucket.com/albums/a...3/IMG_0344.jpg http://i196.photobucket.com/albums/a...3/IMG_0343.jpg http://i196.photobucket.com/albums/a...3/IMG_0341.jpg http://i196.photobucket.com/albums/a...3/IMG_0342.jpg |
|
|
temporary electronics futaba R114H duratrax intellispeed 16T towerpro MG995 integy lathe 75T epic 3000 NiMH http://i200.photobucket.com/albums/a...SWAxial001.jpg http://i200.photobucket.com/albums/a...SWAxial005.jpg |
Here's my new toy! I love this thing! I just need to figure out how to drive it a little better... just popped the drive shaft off. DOH! http://i15.photobucket.com/albums/a4...o/P1010092.jpghttp://i15.photobucket.com/albums/a4...o/P1010089.jpghttp://i15.photobucket.com/albums/a4...o/P1010091.jpg |
My AX-10.. Integy 65t tt motor Dura-Trash IntellSpeed ESC Venom 3600batt. Futaba S3305 Metal Geared Servo Stock Betty Body for now...... http://i96.photobucket.com/albums/l1...75/ax10006.jpg http://i96.photobucket.com/albums/l1...75/ax10007.jpg http://i96.photobucket.com/albums/l1...75/ax10012.jpg |
Mostly borrowed electronics for now until I get some cash for the new stuff. Nothing special. Just another happy Scorpion... http://i44.photobucket.com/albums/f1...0909071117.jpg PS... I hate the Betty body so I obviously destroyed it mostly just for kicks. Awesome new body on the way soon. |
after custom building my rigs for the past few years I thought I would try an AX10... I was very impressed Axial AX10 E-Savage Bug body Mamba Max CrawlMaster brushless Wheely King springs 3s pack Mashers http://hauntnet.com/rc/ax10/rrp_090807_02.jpg http://hauntnet.com/rc/ax10/rrp_090807_03.jpg |
AX-10 Bronco 4 Attachment(s) AX-10 Bronco: Rooster Crawler Hitec 5645 servo JR Radio Weights in front wheels Integy 55t motor 13t pinion Bronco Lid |
heres mine guys "Black Beauty" Motor: Integy 65t ESC: Lrp Super reverse digital Rx/Tx: HPI 2ch. Battery: Power Max Pro 3300 servo: HS-645MG http://i78.photobucket.com/albums/j1...1/100_1497.jpg |
Heres my AX10, its also my first crawler. -Integy 65t lathe -19t pinion, 87t spur -LRP Runner ESC -Tower Pro MG995 servo -Venom 1800 battery http://i46.photobucket.com/albums/f1...own12/ax10.jpg http://i46.photobucket.com/albums/f1...n12/ax10_2.jpg |
All times are GMT -6. The time now is 01:42 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com