RCCrawler Forums

slugzracing · 12-09-2007, 06:14 PM

Quote:

Originally Posted by toy4crawlin

why the heck would you create open pockets like this
[IM]http://www.rccrawler.com/forum/attachment.php?attachmentid=44975&stc=1&d=1191888327[/IMG]

Completely unneeded . Ditch those chassis braces and just run a screw and nut.

JUSTGOINGSLOW · 12-09-2007, 06:23 PM

Can you run the lower links on the inside of the SW3 or does it preform better on the outside

slugzracing · 12-09-2007, 06:25 PM

Quote:

Originally Posted by JUSTGOINGSLOW

Can you run the lower links on the inside of the SW3 or does it preform better on the outside

That will be personal preference but I have always run mine inside the chassis as it really helps you avoid hangups

BENDER · 12-09-2007, 06:26 PM

I'm with Slugz, it's really personal preference on the lower link set-up.

Chaotic Crawlers · 12-10-2007, 01:24 PM

Saturday we had our comp. 40 guys showed up there & there was 4" of snow. The rock was wet and slick and I managed to place 21st. Last time with the stock chassis and bigbores and 60 degree weather and dry rock I placed 34th to me that was a huge gane especially when on course #5 I broke the upper plastic y link which caused my lower link rod end to crack and pop off the axle right in the middle of the run with four gates to go I still only had 26 points. This chassis rocks I dropped 13 positions in worse weather conditions.

Ps. We ran out of time so i didnt pull the window masking before the comp.

12-10-2007, 01:24 PM	#145
Chaotic Crawlers I wanna be Dave Join Date: Oct 2007 Location: 801 Posts: 2,941	Santa Bash Comp Update Saturday we had our comp. 40 guys showed up there & there was 4" of snow. The rock was wet and slick and I managed to place 21st. Last time with the stock chassis and bigbores and 60 degree weather and dry rock I placed 34th to me that was a huge gane especially when on course #5 I broke the upper plastic y link which caused my lower link rod end to crack and pop off the axle right in the middle of the run with four gates to go I still only had 26 points. This chassis rocks I dropped 13 positions in worse weather conditions. Ps. We ran out of time so i didnt pull the window masking before the comp.

12-09-2007, 06:23 PM	#142
JUSTGOINGSLOW RCC Addict Join Date: Oct 2007 Location: Commerce Twp. Posts: 1,773	Can you run the lower links on the inside of the SW3 or does it preform better on the outside

12-09-2007, 06:26 PM	#144
BENDER 2006 2.2 National Champ Join Date: Dec 2004 Location: Big Bear Lake Posts: 8,328	I'm with Slugz, it's really personal preference on the lower link set-up.

Sponsored Links

RCCrawler Forums

Thread: SW3 Build with AX10 axles and tranny........