RCCrawler Forums

El Gooch · 12-12-2007, 02:43 PM

show some pics if you can. I'ed like to see your setup. I also have made my own. I used 1/4 round 6061 aluminum.

The Gooch

Cave Dave · 12-13-2007, 07:50 AM

Quote:

Originally Posted by JUSTGOINGSLOW

Hay Rockcrawler what is the degree of angle right now and how far up do you have the bend

I bent mine to 30 deg 1.5 inches from one end . Used a swage lock tubing bender that made a 3/4 in radius. Works slick after several test runs I have almost no scraches on the bottom.

JUSTGOINGSLOW · 12-13-2007, 08:43 AM

Quote:

Originally Posted by Dave Anthis

I bent mine to 30 deg 1.5 inches from one end . Used a swage lock tubing bender that made a 3/4 in radius. Works slick after several test runs I have almost no scraches on the bottom.

Thanks I'll give it a shot

Cave Dave · 12-13-2007, 09:55 AM

Quote:

Originally Posted by Rockcrawler

125mm or 4.92 inches Center to center.

I cut the rod 4 inches then bent it. Finally measured center to center with rod ends = 4.970

mauromj · 12-14-2007, 11:41 PM

Anyone know how to bend delrin links?

Rockcrawler · 12-15-2007, 10:58 PM

You have to heat them. I dont know how though.

Rockcrawler · 12-28-2007, 03:20 PM

New links with 6/32 allthread.

12-12-2007, 02:43 PM	#21
El Gooch Pebble Pounder Join Date: Oct 2007 Location: San Diego Posts: 140	show some pics if you can. I'ed like to see your setup. I also have made my own. I used 1/4 round 6061 aluminum. The Gooch

12-14-2007, 11:41 PM	#25
mauromj Rock Stacker Join Date: Apr 2007 Location: Spokane Posts: 96	Anyone know how to bend delrin links?

12-15-2007, 10:58 PM	#26
Rockcrawler I wanna be Dave Join Date: Jan 2005 Location: Hueytown, Alabama Posts: 6,777	You have to heat them. I dont know how though.

12-28-2007, 03:20 PM	#27
Rockcrawler I wanna be Dave Join Date: Jan 2005 Location: Hueytown, Alabama Posts: 6,777	New links with 6/32 allthread.

Sponsored Links

RCCrawler Forums

Thread: New links for my axial