New Edge
 

Heres my edge just completed,

It has 1 Futaba S9351 Servo

1 Futaba S9156 Servo

Futaba 6EX stick radio

Novak Lipo protection with common sense R/C Lipo

Integy 55 T Motor

Dynamite Tazer 12T ESC

Bent Links, and custom steering links up front

Attachment 52568

Attachment 52569

Attachment 52570

Attachment 52571

Attachment 52572


Here are the custome links one is 52mm and the other 32 mm! Better clearance!"thumbsup"
Attachment 52573

Looks good! How did you do your shocks?

I was thinking about setting up my steering that way for clearance but haven't seen anyone do it till now. Does it work well any sevro problems??

Nice looking Rig

The only problem with that steering setup is that as you turn, the tires will toe in and your ackerman will suck.


Later,Randy

looks nice

Im still trying to work on the shocks. I purchased the kit from TCS, but they suck! The caps pop off and Im kinda baffeled as to why? ANy suggestions I noticed you have built a good looking rig!

Good point, Im just crawling and learning. Hey I do have better clearance though!"thumbsup"

wow thats a nice t2 008 in the back lol im still running the 007:flipoff:"thumbsup":D

Yea talk about an easy build, I bet I had only 3 hours into the 008!"thumbsup"

Yeah, super glue the caps on.

Good call! Thanks for the info"thumbsup"

Looks good man cant wait to see it in person."thumbsup"

I'm on the same boat w/the shocks.
 

I had the same problem...it's not the shocks themselves--its the binding (shock cap hitting the frame at articulation) causing the pop-off. I had to limit my travel by using plastic tubing inside the shock....so far it looks good.

what length did you cut the tubing to?

Yeahm its a good idea to limit the travel on the shocks anyway, they have way to much to start with. I think mine are down to about half on my edge and less than that on my comp rig.

I cut mine to 3/4". There almost level.

So did you take the bump stops off and put them inside or leave them on the shaft?

I took them off.

You need to run them inside the shock on top of the piston to get the correct ride height on that chassis.

looks really good man i wish i would have waited on my tuber