06-24-2016, 10:43 PM | #21 |
I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town
Posts: 3,011
| Re: The "What The Hell" #2
Found some more pieces of the puzzle in the mail slot today, and a day early... The CDW chassis and skid Rob at Krazed Builds does an awesome job...... THANK YOU !! Superb Skid ] Clearence is tight....... Making a bit of progress....... thats about it for tonight.... thanx for lookin Questions welcome..... Last edited by roksloski; 06-24-2016 at 10:46 PM. |
Sponsored Links | |
06-25-2016, 09:53 AM | #22 |
I wanna be Dave Join Date: Nov 2009 Location: Chico now
Posts: 2,384
| Re: The "What The Hell" #2
Looking good Slo! Got any current pics of your daughter? |
06-25-2016, 12:18 PM | #23 |
Rock Crawler Join Date: Jul 2013 Location: california
Posts: 516
| Re: The "What The Hell" #2
very nice, what shock oil are going to run? 35 front 55 rear?
|
06-25-2016, 01:58 PM | #24 |
I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town
Posts: 3,011
| Re: The "What The Hell" #2 |
06-26-2016, 09:07 PM | #25 |
I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town
Posts: 3,011
| Re: The "What The Hell" #2
Some more pieces showed up yesterday....... RCbros weight hangers........ Thank you Will.... and some spring cups.... (not Shown ) truck is getting close.... |
06-27-2016, 06:05 AM | #26 |
Custom Carbon Fiber Join Date: Oct 2007 Location: Connecticut :(
Posts: 4,501
| Re: The "What The Hell" #2 |
06-27-2016, 05:10 PM | #27 |
I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town
Posts: 3,011
| Re: The "What The Hell" #2 |
06-27-2016, 05:52 PM | #28 |
I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town
Posts: 3,011
| Re: The "What The Hell" #2
KL knuckle weights from Krazed Builds on Rcbro weight hangers... bolted to VP Wraith knuckles........ also working on the electronics a bit.... thanx for lookin......... |
06-27-2016, 06:00 PM | #29 |
Rock Crawler Join Date: Jul 2013 Location: california
Posts: 516
| Re: The "What The Hell" #2
Do those knuckle weight require special wheels? Did they require any modification to fit the rc bros hangers? which pistons are you running? Very nice.
Last edited by Dezertdirt; 06-27-2016 at 06:03 PM. |
06-27-2016, 06:09 PM | #30 |
Custom Carbon Fiber Join Date: Oct 2007 Location: Connecticut :(
Posts: 4,501
| Re: The "What The Hell" #2 I think with the triangles we're gonna see heavy oils because of less piston area. But you stand yours up more then mine and most Ive seen so that might work for ya. I know Barry went with 10,000 and he liked it on the two pros hes done. I wanna say though 2000 felt like 70 in my pro rig with the stock machined ones for comparison but smoother. The diff fluids dont seem to thin out with the heat like normal shock oils or maybe its just because theyre silicone based. And Im running green springs like you. Interested to hear though what you think of your choice once you get it together. |
06-27-2016, 08:18 PM | #31 |
I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town
Posts: 3,011
| Re: The "What The Hell" #2
To start off... I used 70wt. in front 80wt. in rear... my choice of pistons to start with are the Green...... |
06-29-2016, 01:40 PM | #32 |
I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town
Posts: 3,011
| Re: The "What The Hell" #2
Rear Axle is cut, tanged and installed....... only need to do the long side.... pictures later..... |
06-30-2016, 07:39 PM | #33 |
Rock Crawler Join Date: Jun 2007 Location: Arlington
Posts: 684
| Re: The "What The Hell" #2
Lookin' good! My un-stuck skid didn't look like that..... time to put it on the mill! The different shape pistons remind me of old (1990ish) buggy shocks. They would have an octagon design for oil passages instead of holes. They wore out very quickly in racing conditions. |
07-04-2016, 02:15 AM | #34 |
Try to Bend it Join Date: Aug 2009 Location: Perth Australia
Posts: 3,163
| Re: The "What The Hell" #2
What flavour are the candles? |
07-04-2016, 11:43 AM | #35 |
I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town
Posts: 3,011
| Re: The "What The Hell" #2 |
07-04-2016, 03:03 PM | #36 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: The "What The Hell" #2
Classic 149 r/c worx team driver |
07-13-2016, 01:22 PM | #37 |
I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town
Posts: 3,011
| Re: The "What The Hell" #2 picture of the long side axle cut and a new tang ground....... Last edited by roksloski; 07-13-2016 at 01:54 PM. |
08-25-2016, 11:10 AM | #38 |
I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town
Posts: 3,011
| Re: The "What The Hell" #2
Ok, i got side tracked building styrene shop stuff...... but got some time to cut and tang some uni's, and do up the electronics... Also got a set of BossClaws for it, soon as i got them, i narrowed them up..... also got a bit of motivation to make some 1/4" alum. links... saved me about 32 bucks that could be spent on my berg or scaler... i might go for the Wraith VP weights, dont know yet.... thanx for lookin............ |
08-25-2016, 11:55 AM | #39 |
I wanna be Dave Join Date: Nov 2009 Location: Chico now
Posts: 2,384
| Re: The "What The Hell" #2
1/4" aluminum is so 2009 |
08-25-2016, 12:13 PM | #40 |
I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town
Posts: 3,011
| Re: The "What The Hell" #2 |
The "What The Hell" #2 - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
The "What The Hell am i doing building a sporty" Thread | roksloski | Axial AX10 2nd-gen | 61 | 05-17-2016 03:58 PM |
whoever said "war is hell..." NEVER PUMPED CONCRETE!!! | dieselfuel | Chit Chat | 30 | 01-12-2012 07:10 PM |
Where the hell is a good place to go "trailin" in Albuquerque | 4X42HEL | New Mexico | 10 | 09-25-2010 09:59 PM |
| |