RCCrawler Forums - Vanquish Incision Wraith 1/4" stainless link kit

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Axial AX10 2nd-gen (http://www.rccrawler.com/forum/axial-ax10-2nd-gen/)

- - Vanquish Incision Wraith 1/4" stainless link kit (http://www.rccrawler.com/forum/axial-ax10-2nd-gen/580894-vanquish-incision-wraith-1-4-stainless-link-kit.html)

mewalsh100

03-02-2017 08:41 AM

Vanquish Incision Wraith 1/4" stainless link kit

I was planning on purchasing the Incision Wraith link kit for my AX10 Deadbolt. (Tired of the cheap plastic ball ends on the Aluminum Axial links) Anyway, I looked around here and it sounds like people have done it. My question is, due to the Wraiths longer wheelbase and skidplate, will I need to get extended length outputs to make up for driveshaft length? I'm running JunFac's specific to the AX10 right now. Any info is appreciated - Thanks!

mewalsh100

03-06-2017 06:01 PM

Re: Vanquish Incision Wraith 1/4" stainless link kit

I figured I'd post a quick update even though there were no replies. The Incision 1/4" stainless links worked out great. As I mentioned, my concern was possibly having to go with shorter rod ends to accommodate the shorter wheelbase on the AX10. But, there was plenty of overlap on the driveshafts and everything looks good, articulates well.

SCREAMER

04-01-2017 02:19 PM

Re: Vanquish Incision Wraith 1/4" stainless link kit

Wraith and AX10 links are identical length front and rear upper and lower. The difference in wheelbase comes from the Wraiths longer skid.

All times are GMT -6. The time now is 09:27 PM.