|
"The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw I built this Gatekeeper from parts sitting around the C.I shop. The chassis is a Gatekeeper delrin prototype and skid. The chassis already had these AR60 axles with links and shocks bolted up. I am building this Gatekeeper for Activated Outlaw rule set in the Competition 4x4 class. https://farm2.staticflickr.com/1937/...cecf4867_c.jpg https://farm2.staticflickr.com/1927/...e731c029_c.jpg I first got a Dlux Cheez berger and I wanted to use the opposite rotation driveshafts and use the built in overdrive. I bolted the Cheez berger up to the skid with no clearance issues. I then flipped the front axle and made a 1/8 delrin truss that holds the servo, esc, bec, battery, receiver, and upper link mounts. I bent my own titanium steering links and made a rear axle 1/8 delrin truss for parallel rear upper links. I built Traxxas 3.5 big bore shocks for the front and rear with 3 hole pistons and dlux spring cups with mini t springs. Build Parts: Gatekeeper Prototype Chassis AR60 plastic housing Front axle aluminum tube Front axle overdrive gear set (passenger drop) Rear axle underdrive gear set (Driver drop) Eggressor knuckles AX10 chubsDlux Cheez Berger Trans Traxxas plastic driveshafts Traxxas 3.5 big bore shocks, 3 hole piston, Dlux spring cups, mini T springs Titanuim links Electronics: Futaba receiver Hitec 7954SH servo Castle Creations BEC Castle Creations Mamba Micro X ESC Castle Creations 2280 KV sensored motor Running on 3s 800MAH lipo Tires, Wheels, and Foams: Voodoo pins cut, narrowed, and shortened made by Nova's Ark Crawler Innovations 6 Bolt 1" wheels Crawler Innovations triple stage prototype foams |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis: Activated Outlaw |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw Nice spare parts rig... good luck. I'm Interested to hear how the brushless motor works out for you. Sent from my SM-J737V using Tapatalk |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw I shaved the front and rear axle housings and sanded up to 600 grit for better ground clearance. The Cheez berger trans with reverse rotation outputs drives very different from any rig I have driven. I can drive this rig for multiply battery packs and the ESC, motor, and servo never get warm. The brushless motor is great it has more torque, faster, and runs forever without getting hot. With that said the motor KV is not low enough for my preference so I would recommend a Castle Creations 1900KV motor."thumbsup" https://farm5.staticflickr.com/4810/...de3077ee_c.jpg https://farm5.staticflickr.com/4905/...951e8895_c.jpg https://farm5.staticflickr.com/4835/...d758bdeb_c.jpg https://farm5.staticflickr.com/4836/...a9fd92f3_c.jpg https://farm5.staticflickr.com/4843/...90f3287a_c.jpg |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw Quote:
|
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw Great build thread Gavin."thumbsup" It has been wonderful to see you build this rig on your own. |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw Very cool! What knuckles are those? |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw Quote:
Thank You Dad! -Gavin Quote:
|
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw Cool rig. Are the ar60's narrowed? Also what is it like to run so much overdrive? What battery are you running? |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw Quote:
The AR60's are not narrowed, still stock width. I like the overdrive it turns great, a little throttle and the front axle will turn and reposition. Going down-hill the truck is real stable the rear unders really slow the rear of the car down and acts as a brake. Going up-hill the truck grabs most ledge's you can get one front tire with. My battery is a 3S 800MAH Lipo 30C which last 15 to 20 minutes. Thank You. -Gavin |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw More pics https://farm5.staticflickr.com/4835/...047d92c2_c.jpg https://farm5.staticflickr.com/4835/...3022d96f_c.jpg https://farm5.staticflickr.com/4917/...50ae9bb3_c.jpg https://farm5.staticflickr.com/4887/...595f5271_c.jpg I added 4 more bolts to the delrin truss and shaved the front diff cover some more. https://farm8.staticflickr.com/7897/...94fa5819_c.jpg |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw https://farm5.staticflickr.com/4821/...21d4df23_c.jpg https://farm5.staticflickr.com/4817/...faed74df_c.jpg https://farm5.staticflickr.com/4860/...e84dd187_c.jpg https://farm8.staticflickr.com/7896/...22427808_c.jpg I am switching the delrin gatekeeper prototype chassis for an aluminum gatekeeper chassis that was sitting around the C.I shop. The reason I am switching the delrin chassis is because the delrin chassis flexes under high stress binds and isn't as strong as the aluminum. https://farm5.staticflickr.com/4874/...44ff028d_c.jpg |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw More pics of the two Gatekeepers. https://farm8.staticflickr.com/7881/...00ea0e17_c.jpg https://farm8.staticflickr.com/7847/...634ebbe8_c.jpg https://farm5.staticflickr.com/4803/...d7991186_c.jpg https://farm8.staticflickr.com/7816/...f7b04425_c.jpg The aluminum Gatekeeper has a different skid. https://farm8.staticflickr.com/7835/...c97b103b_c.jpg |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw The different skids. https://farm5.staticflickr.com/4838/...6fc2314f_c.jpg https://farm5.staticflickr.com/4878/...58fa7f35_c.jpg All back together with the new aluminum Gatekeeper chassis along with new rear single bend titanium links, jeepindoug 6mm aluminum ball studs on Upper links. https://farm5.staticflickr.com/4913/...af12dd11_c.jpg https://farm5.staticflickr.com/4901/...609c45e2_c.jpg https://farm5.staticflickr.com/4861/...4cb44974_c.jpg |
Re: "The Gatekeeper" A AMW Built AR60 Axle'd,Gatekeeper Chassis , Activated Outlaw |
| All times are GMT -6. The time now is 01:44 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com