RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial AX10 2nd-gen (http://www.rccrawler.com/forum/axial-ax10-2nd-gen/)
-   -   Szczerba’s 2019 Comp Sportsman “Enigma” Build (http://www.rccrawler.com/forum/axial-ax10-2nd-gen/606181-szczerba%92s-2019-comp-sportsman-%93enigma%94-build.html)

Szczerba 02-10-2019 02:07 AM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Got the rear axle final assembled.
Rear has some negative camber built into the lockouts, so uni’s it is.
I have regular portal box covers but leaving these weight holders on for now, in case rear weight is needed.
https://uploads.tapatalk-cdn.com/201...bf0a6ba5a8.jpg
Transmission and motor final installed.
https://uploads.tapatalk-cdn.com/201...1ea8bdc2f3.jpg
https://uploads.tapatalk-cdn.com/201...3e39b8bb93.jpg
https://uploads.tapatalk-cdn.com/201...8d0928995d.jpg

CM9000 02-10-2019 10:18 AM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Rear axle spinning faster than the front?

Sent from my LGMP260 using Tapatalk

Szczerba 02-10-2019 01:28 PM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Quote:

Originally Posted by CM9000 (Post 5909202)
Rear axle spinning faster than the front?

Sent from my LGMP260 using Tapatalk

I hope not! I must have mixed the numbers up.

CM9000 02-11-2019 10:51 AM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Looks good on them shocks and shoes. Hint hint.

Sent from my LGMP260 using Tapatalk

STANG KILLA SS 02-11-2019 10:55 AM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
was TT factored in on the side the driveshafts were choosen to be on?
awesome trans.


what pin to pin measurement is your axle width closest to on an axial rig? SCX? XR? AR60?


TSS building on road racers, and Shane building carbon fiber comp rigs.
the demise of RCC is here:mrgreen:

Szczerba 02-11-2019 05:40 PM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Quote:

Originally Posted by STANG KILLA SS (Post 5909430)
was TT factored in on the side the driveshafts were choosen to be on?
awesome trans.


what pin to pin measurement is your axle width closest to on an axial rig? SCX? XR? AR60?


TSS building on road racers, and Shane building carbon fiber comp rigs.
the demise of RCC is here:mrgreen:

Everything was "factored" into this rig. For example, there are only two adjustment points on the axle upper links. "thumbsup"

I'd have to measure the pin to pin.

I was hastily hand hacking carbon fiber comp rigs back in 2011 !
http://www.rccrawler.com/forum/axial...f-sz-2-2s.html

Szczerba 02-11-2019 10:49 PM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
These are 9.3” pin to pin and AR60’s are 9.65” pin to pin.

Dezertdirt 02-12-2019 10:57 PM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Great build. How much was the setup from high altitude performance? Also, how did you narrow the axle shafts (what tools did you use?)?

Szczerba 02-13-2019 12:46 AM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Quote:

Originally Posted by Dezertdirt (Post 5909935)
Great build. How much was the setup from high altitude performance? Also, how did you narrow the axle shafts (what tools did you use?)?

Thanks. Just some calipers and a dremel to cut the shaft to length and to grind the flats.

Szczerba 02-15-2019 08:37 PM

Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Foams and tires.

Narrowed Ottsix Voodoo Gold Pins. Narrowed up a pair of silvers too.
https://uploads.tapatalk-cdn.com/201...7771bd770a.jpg
Crawler Innovations 5.5 and 6.0 double deuce comp cut narrow inners
https://uploads.tapatalk-cdn.com/201...40d43097fa.jpg

Random picture of the quality parts used in this build. Old comp body from 8 years ago painted by BC Paints! That I never threw away or sold.
Vanquish
Holmes Hobbies
Castle
Axial
Dravtech

https://uploads.tapatalk-cdn.com/201...f43aec405a.jpg

Szczerba 02-15-2019 09:12 PM

Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Also, found these Tattu 4s 450mahs
1.77x0.94x1.06in

https://uploads.tapatalk-cdn.com/201...f965e93007.jpg
https://uploads.tapatalk-cdn.com/201...6492ff681f.jpg

muffhuntin 02-17-2019 03:36 PM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Cool build looking good!

Szczerba 02-20-2019 06:08 PM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Quote:

Originally Posted by muffhuntin (Post 5911064)
Cool build looking good!

Thanks. Been doing some testing and tuning, as well as waiting on a few final parts to arrive. Then I can mount the body and start really testing and tuning.

Brandon 02-20-2019 08:35 PM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
After you mentioned this today I had to check in on the progress. Loving it so far.

Szczerba 02-24-2019 02:18 AM

Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Quote:

Originally Posted by Brandon (Post 5911993)
After you mentioned this today I had to check in on the progress. Loving it so far.


Thanks! A little slow going in the garage and heavy rain last week so kept me off the rocks.

Got to the final wiring tonight. Not the cleanest but good enough.
Futaba 614ff, castle bec pro, HH mini BR sandwich.
https://uploads.tapatalk-cdn.com/201...917ecc744f.jpg
https://uploads.tapatalk-cdn.com/201...93a3fb20c1.jpg
https://uploads.tapatalk-cdn.com/201...705a56873f.jpg
https://uploads.tapatalk-cdn.com/201...23f29238e2.jpg
https://uploads.tapatalk-cdn.com/201...c24047fde8.jpg
RTR minus body
https://uploads.tapatalk-cdn.com/201...97a99c759a.jpg
https://uploads.tapatalk-cdn.com/201...9bb4c66077.jpg
https://uploads.tapatalk-cdn.com/201...3872e3f3f0.jpg
https://uploads.tapatalk-cdn.com/201...fd561ffe89.jpg
Yup, rear camber
https://uploads.tapatalk-cdn.com/201...3511ad18c5.jpg
https://uploads.tapatalk-cdn.com/201...e26c80734e.jpg
https://uploads.tapatalk-cdn.com/201...51fa0a10fb.jpg
https://uploads.tapatalk-cdn.com/201...568ab2ba3a.jpg

distinctive pd 02-24-2019 09:11 AM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Very cool build! Excited to see some video of this beast. "thumbsup"

xkill 02-25-2019 02:49 PM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
I really like this project!
I'm curious about the rear camber, but it's different, and I like that.

The only thing I'm not such a fan of is how wide the chassis is...

Szczerba 02-26-2019 06:11 PM

Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Quote:

Originally Posted by distinctive pd (Post 5912870)
Very cool build! Excited to see some video of this beast. "thumbsup"



Honing in the perfect setup every evening, one 650mah pack at a time. :ror:



Quote:

Originally Posted by xkill (Post 5913235)
I really like this project!

I'm curious about the rear camber, but it's different, and I like that.



The only thing I'm not such a fan of is how wide the chassis is...



Rear camber is for sidehill and uphill turning stability.



All of the components were/are thought out and have a purpose. The chassis is "wide" to get the upper links close to perpendicular to the axle mounting points without having to add mega spacers (weak point) at the chassis. Also, it relates to shock positioning at the chassis and the axles.



So, that translates into a car that needs very little tuning (compared to a setup with multiple tuning points) when it's bolted together and ready to run. It has two adjustment points on the upper links at the axle and an 1" or so adjustment at the chassis. Paired with the link/shock locations already designed to be "close" to great. Although, some may not like this chassis setup for their driving style, it is car that works super good with little previous knowledge of car setup. Just my $0.02. I haven't built a custom sporty comp crawler since 2012 and this car jumped me right to where I was in 2012 without the hours of hand cutting chassis and other components.

Robbob 02-27-2019 09:36 AM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Itll never work - its just a fad :mrgreen::mrgreen::ror:

3D printing has def opened up a lot of options and Casey is finding them for sure. Nice seeing a veteran dabble in the comp side again. "thumbsup"

JatoTheRipper 02-27-2019 11:28 AM

Re: Szczerba’s 2019 Comp Sportsman “Enigma” Build
 
Bad ass build!

You call it Enigma, but I think it's (Red)onkulous!


All times are GMT -6. The time now is 08:40 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com