HumboldtEF's Sucker Punch/SSDlux Sporty

[HumboldtEF]

Thanks for the reply hnoroian I'll probably try pulling the wheels apart soon.

I pulled 2 of the 4 tungsten slugs out of the driver side knuckle and moved 2 of those to the passenger side rear. While I was playing around with that I was reminded that the side to side weights on the SkyRC scales are calculated wrong. The left (bias/balance) percentages are based on the Front right + the rear left and vice versa for the other side. So to get the reading I want I had to swap the rear scales side to side.



I sucked the suspension all the way down while weighing it as it would read different every time I shifted it around, even after that it still shifted around.

As for how I'll add the slug to the rear axle I'll probably design and 3D print some mounts.

[House]

I would skip the rear weights, especially on a shaft driven rig.
If you are real good with an x-acto knife you can get the face off of that tire as well…