Capra Battery Thread

[RCTom]

I've got a pair of these batts on on order from AMain that should be here any day.: https://www.amainhobbies.com/lumenie...um2951/p997406

RPP has some 3S Helios 1500 batteries that look like they'll also fit the bill nicely. Helios has a better reputation and I wanted those but RPP was out of stock on everything I wanted to order. AMain had everything but with the Lumenier batteries instead so I thought I'd give them a try.

I also have the same 4100 mah ProTek LiHv packs mentioned by JSterrett which on paper should fit. I'll let y'all know after I get the truck build started soon.

[indybama]

Originally Posted by soze

I've been using a HobbyStar 3S 3700mah in my Element. It should fit the Capra as well.

How u like those hobbystar batts soze? I get emails from rcjuice with those advertised. Thought bout pickn up a couple, but figured id get some input from some users first

Sent from my SM-J327VPP using Tapatalk

[soze]

Originally Posted by indybama

How u like those hobbystar batts soze? I get emails from rcjuice with those advertised. Thought bout pickn up a couple, but figured id get some input from some users first

Sent from my SM-J327VPP using Tapatalk

*shrug* not much to say other than that they work and fit small battery tray applications. It's the main battery I've been running in my element. Works well for me.

Sent from my LG-H931 using Tapatalk

[FastMatt]

I also run the Hobbystar 3700 batteries in a few rigs. They work well enough for the $40 price. Although my Capra is only 50% done, they definitely do fit the battery tray.

https://www.rcjuice.com/lipo-batteri...o-battery.html

[Dbdynsty25]

I've got about a dozen RC Juice Hobbystar batteries and I've only one puff on me after about 2 dozen cycles. The rest have been absolutely perfect. Can't recommend them enough.

[Sneetches]

I'm currently running some cheap 1600mAh 3S soft packs that I was originally using in my plane. With the battery tray set to fit them snug they are 102mm x 35mm (wide) x 20mm .

[hotwheels000]

Any body find a 4s that fits that also has enough amp capacity to handle a 2700 brushless ?

[Teclas]

Gens Ace Adventure 3600's seem to fit.

[TheLetterJ]

Originally Posted by hotwheels000

Any body find a 4s that fits that also has enough amp capacity to handle a 2700 brushless ?

I just happened to test fit this guy 60C 4S 1000mah LiPO Battery | Value Hobby in there a few minutes ago, fits great, plenty of room for the wires in the tray. 60 amps (888watts @ 14.8v) is plenty to keep up with a 2700kv, especially if it's a stubby.

[meatmonkey]

I know that typically the zippy and turnigy packs are fairly close in size for a given mah. I see that people are able to squeeze in a 2200mah 3s zippy pack. Could someone confirm that the same size turnigy packs fit? I have a bunch of those and it would be easier to justify another truck purchase if my turnigys fit.

[Nova's Ark]

Gavin and I are using these G Force Elite 100C 4S 1300mah lipo battery in our Capra build.
Linked here;
GForce Elite Series 100C 1300mAh 4S 14.8V LiPO (XT60 Connector) - 4S LiPO - 14.8V - Batteries - Power | Value Hobby

[GA Dawg]

Originally Posted by JatoTheRipper

I'm using Goldbat 3S 1500mAh LiPos and there is plenty of room left so I'm looking for something slightly bigger.

I picked up a couple of those. I got about 50 minutes per pack while 60/40 crawling/trailing.

[JatoTheRipper]

Originally Posted by GA Dawg

I picked up a couple of those. I got about 50 minutes per pack while 60/40 crawling/trailing.

Awesome! Good to know. 4 should easily get me through the day then.

[GA Dawg]

I was pleasantly surprised. I was thinking I'd go somewhere in the 30-40 minute range on those.

[JatoTheRipper]

Originally Posted by GA Dawg

I was pleasantly surprised. I was thinking I'd go somewhere in the 30-40 minute range on those.

What motor, ESC and gearing are you using?

[GA Dawg]

Originally Posted by JatoTheRipper

What motor, ESC and gearing are you using?

Reedy Radon 16T motor with a 13T pinion and a Mamba X.

[JatoTheRipper]

Originally Posted by GA Dawg

Reedy Radon 16T motor with a 13T pinion and a Mamba X.

I have the same motor with a 1080 ESC and the stock, 14T pinion.

[GA Dawg]

I'm going to try and dig up a sintered 11T pinion. I had a hardened 11T pinion and it was really loud. I'm not saying that the mesh was necessarily perfect, but the sintered metal on sintered metal sounds a lot better to me. I like a little wheel speed, but not quite this much.

[Panther6834]

Originally Posted by GA Dawg

I'm going to try and dig up a sintered 11T pinion. I had a hardened 11T pinion and it was really loud. I'm not saying that the mesh was necessarily perfect, but the sintered metal on sintered metal sounds a lot better to me. I like a little wheel speed, but not quite this much.

What is the stock Axial Pinion made of?

~ More peace, love, laughter, & kindness would make the world a MUCH better place

[WHITE-TRASH]

Originally Posted by Panther6834

What is the stock Axial Pinion made of?

Sintered metal.