Ignorant by ivan 84!!!

[ivan84]

Good morning!
Let me introduce you to my goat, step by step, with changes other than the standard axial one!!!

http://scalersandcrawlers.it/xeno/in...435-jpg.18521/

[JatoTheRipper]

I'm looking forward to your build.

I urge you to embed your photos, as seen below, so people can view them without clicking links. Your thread will get more attention with embedded images.

[ivan84]

Originally Posted by JatoTheRipper

I'm looking forward to your build.

I urge you to embed your photos, as seen below, so people can view them without clicking links. Your thread will get more attention with embedded images.

Thanks a lot for the help you are giving me to upload the photos, but I can't upload them, is there a procedure ???????????

[JatoTheRipper]

Originally Posted by ivan84

Thanks a lot for the help you are giving me to upload the photos, but I can't upload them, is there a procedure ???????????

You have to pay for a star to upload them directly to the website. To get them to embed like I did, just put [IMG] at the front of your image link and [/IMG] at the rear like this: see screenshot

Or you can hit the button in the screenshot, circled in red, to accomplish the same thing.

I hope that helps.

[ivan84]

Okkk thanks for the explanation, but it doesn't make me copy and paste the image, by clicking on the screenshot .....

[ivan84]

Ecco la mia skid progettata da me:

[IMG][/IMG]

[ivan84]

[IMG][/IMG]

[Jim85IROC]

Originally Posted by ivan84

[IMG][/IMG]

It should look something like this, except replace the {} with []

{img}http://scalersandcrawlers.it/xeno/index.php?attachments/img_20191031_165435-jpg.18521/{/img}

[ivan84]

[IMG][/IMG]

[ivan84]

I present a product that serves to make the skid shiny, but also to harden the parts subject to "breakage":

[ivan84]

[ivan84]

[TheLetterJ]

Is that an esc mount on the back/right corner of the skid? Is there still plenty of room for a 540 size motor?

[ivan84]

Originally Posted by TheLetterJ

Is that an esc mount on the back/right corner of the skid? Is there still plenty of room for a 540 size motor?

Yes, the 540 engine fits, and I also designed a skid with a smaller esc support to also mount the "holmes stubby engine":

[ivan84]

I show you the skids I produced, 2 models: "short" and long "version, with positioning of the ESC behind the motor and as low as possible:

[mewalsh100]

Awesome work. That dig servo mount looks far beefier than the OE skid.

[ivan84]

Originally Posted by mewalsh100

Awesome work. That dig servo mount looks far beefier than the OE skid.

Yes, the servo mount mount is robust .... and also, the application of the 3D finish becomes very difficult to "break"

[ivan84]

One thing that I never liked is the central upper part, so I worked its feet at 45 degrees and mounted an extron engine, and later I will also mount 1800kv holmes ....

[JatoTheRipper]

Nice work on the skid plate! Your printer seems to be working excellently. Which printer are you using?

[ivan84]

Originally Posted by JatoTheRipper

Nice work on the skid plate! Your printer seems to be working excellently. Which printer are you using?

Thanks, I'm happy with the excellent work, and above all I lowered the central part so much, which is originally very high!

My printer is "tornado tevo", but it has been modified by me to improve printing!