nucklehead’s Capra
 

It was suggested to start a build thread so when I have questions re my Capra I can post here instead of posted a separate thread each time......so here’s my first question: I have a HH HV500v2 servo that I installed but the servo horn is making contact with the servo reducing the turning radius, what do I need to in order for the horn to clear the servo.
https://i.imgur.com/2UJxWdZl.jpg
https://i.imgur.com/HxSXT8Ll.jpg

Thanks in advance.

Re: nucklehead’s build
 

I suggest a new servo horn. My Protek horn doesn't have that nub in back, it should clear. Check with your LHS and if they don't have one AMain has a bunch that will work for $10-30https://uploads.tapatalk-cdn.com/202...98fe691a29.jpg

Sent from my Pixel 3a XL using Tapatalk

Re: nucklehead’s build
 

Thanks. I found another horn and it cleared the servo but it was a little too long and the geometry of the front links were off so I put stock servo back on.